The self-irradiation damage generated by alpha decay of plutonium results in the formation of lattice defects, helium, and uranium atoms. Over time, microstructural evolution resulting from the self-irradiation may influence the physical and mechanical properties of the material. In order to assess microstructural changes, we have developed and applied procedures for the specimen preparation, handling, and transmission electron microscopy characterization of Pu alloys. These transmission electron microscopy investigations of Pu-Ga alloys ranging in age up to 42-years old reveal the presence of nanometer-sized helium bubbles. The number density of bubbles and the average size have been determined for eight different aged materials.

A gated spectrometer has been designed for real-time, pulsed infrared (IR) studies at the National Synchrotron Light ource at the Brookhaven National Laboratory. A pair of 90-degree, off-axis parabolic mirrors are used to relay the light from an entrance slit to an output IR recording camera. With an initial wavelength range of 1500–4500 nm required, gratings could not be used in the spectrometer because grating orders would overlap. A magnesium oxide prism, placed between these parabolic mirrors, serves as the dispersion element. The spectrometer is doubly telecentric. With proper choice of the air spacing between the prism and the second parabolic mirror, any spectral region of interest within the InSb camera array’s sensitivity region can be recorded. The wavelengths leaving the second parabolic mirror are collimated, thereby relaxing the camera positioning tolerance. To set up the instrument, two different wavelength (visible) lasers are introduced at the entrance slit and made collinear with the optical axis via flip mirrors. After dispersion by the prism, these two laser beams are directed to tick marks located on the outside housing of the gated IR camera. This provides first-order wavelength calibration for the instrument. Light that is reflected off the front prism face is …

To model entire microfluidic systems containing solvated polymers we argue that it is necessary to have a numerical stability constraint governed only by the advective CFL condition. Advancements in the treatment of Kramers bead-rod polymer models are presented to enable tightly-coupled fluid-particle algorithms in the context of system-level modeling.

Results of radiation damage in Pu and Pu{sub 1-x}Am{sub x} alloys studied with magnetic susceptibility, {chi}(T), and resistivity are presented. Damage accumulated at low temperatures increases {chi}(T) for all measured alloys, with the trend generally enhanced as the lattice expands. There is a trend towards saturation observable in the damage induced magnetic susceptibility data, that is not evident in similar damage induced resistivity data taken on the same specimen. A comparison of isochronal annealing curves measured by both resistivity and magnetic susceptibility on a 4.3at% Ga stabilized {delta}-Pu specimen show that Stage I annealing, where interstitials begin to move, is largely transparent to the magnetic measurement. This indicates that interstitials have little impact on the damage induced increase in the magnetic susceptibility. The isochronal annealing curves of the Pu{sub 1-x}Am{sub x} alloys do not show distinct annealing stages as expected for alloys. However, samples near 20% Am concentration show an unexpected increase in magnetization beginning when specimens are annealed to 35K. This behavior is also reflected in a time dependent increase in the magnetic susceptibility of damaged specimens indicative of first order kinetics. These results suggest there may be a metastable phase induced by radiation damage and annealing in Pu{sub …

Measures the fast pulses seen with exploding bridge flyers by PDV

Compton scattering has been developed for accurate measurements of densities and temperatures in dense plasmas. One future challenge is the application of this technique to characterize compressed matter on the National Ignition Facility where hydrogen and beryllium will approach extremely dense states of matter of up to 1000 g/cc. In this regime, the density, compressibility, and capsule fuel adiabat may be directly measured from the Compton scattered spectrum of a high-energy x-ray line source. Specifically, the scattered spectra directly reflect the electron velocity distribution. In non-degenerate plasmas, the width provides an accurate measure of the electron temperatures, while in partially Fermi degenerate systems that occur in laser-compressed matter it provides the Fermi energy and hence the electron density. Both of these regimes have been accessed in experiments at the Omega laser by employing isochorically heated solid-density beryllium and moderately compressed beryllium foil targets. In the latter experiment, compressions by a factor of 3 at pressures of 40 Mbar have been measured in excellent agreement with radiation hydrodynamic modeling.

The accuracy of Cartesian embedded boundary methods for the second order wave equation in general two-dimensional domains subject to Dirichlet boundary conditions is analyzed. Based on the analysis, we develop a numerical method where both the solution and its gradient are second order accurate. We avoid the small-cell stiffness problem without sacrificing the second order accuracy by adding a small artificial term to the Dirichlet boundary condition. Long-time stability of the method is obtained by adding a small fourth order dissipative term. Several numerical examples are provided to demonstrate the accuracy and stability of the method. The method is also used to solve the two-dimensional TM{sub z} problem for Maxwell's equations posed as a second order wave equation for the electric field coupled to ordinary differential equations for the magnetic field.

Understanding the behavior of fractures and subsurface damage in the processes used during optic fabrication plays a key role in determining the final quality of the optical surface finish. During the early stages of surface preparation, brittle grinding processes induce fractures at or near an optical surface whose range can extend from depths of a few mm to hundreds of mm depending upon the process and tooling being employed. Controlling the occurrence, structure, and propagation of these sites during subsequent grinding and polishing operations is highly desirable if one wishes to obtain high-quality surfaces that are free of such artifacts. Over the past year, our team has made significant strides in developing a diagnostic technique that combines magnetorheological finishing (MRF) and scanning optical microscopy to measure and characterize subsurface damage in optical materials. The technique takes advantage of the unique nature of MRF to polish a prescribed large-area wedge into the optical surface without propagating existing damage or introducing new damage. The polished wedge is then analyzed to quantify subsurface damage as a function of depth from the original surface. Large-area measurement using scanning optical microscopy provides for improved accuracy and reliability over methods such as the COM ball-dimple technique. …

We present a map and an angular power spectrum of the anisotropy of the cosmic microwave background (CMB) from the first flight of MAXIMA. MAXIMA is a balloon-borne experiment with an array of 16 bolometric photometers operated at 100 mK. MAXIMA observed a 124 deg region of the sky with 10' resolution at frequencies of 150, 240 and 410 GHz. The data were calibrated using in-flight measurements of the CMB dipole anisotropy. A map of the CMB anisotropy was produced from three 150 and one 240 GHz photometer without need for foreground subtractions. Analysis of this CMB map yields a power spectrum for the CMB anisotropy over the range 36 {le} {ell} {le} 785. The spectrum shows a peak with an amplitude of 78 {+-} 6 {mu}K at {ell} {approx_equal} 220 and an amplitude varying between {approx} 40 {mu}K and {approx} 50 {mu}K for 400 {approx}< {ell} {approx}< 785.

The addition of chromium and molybdenum to nickel creates alloys with exceptional corrosion resistance in a diverse range of environments. This study examines the complementary roles of Cr and Mo in Ni alloy passivation. Four nickel alloys with varying amounts of chromium and molybdenum were studied in 1 molar salt solutions over a broad pH range. The passive corrosion and breakdown behavior of the alloys suggests that chromium is the primary element influencing general corrosion resistance. The breakdown potential was nearly independent of molybdenum content, while the repassivation potential is strongly dependant on the molybdenum content. This indicates that chromium plays a strong role in maintaining the passivity of the alloy, while molybdenum acts to stabilize the passive film after a localized breakdown event.

Spherulites are spherical clusters of radiating crystals that occur naturally in rhyolitic obsidian. The growth of spherulites requires diffusion and uptake of crystal forming components from the host rhyolite melt or glass, and rejection of non-crystal forming components from the crystallizing region. Water concentration profiles measured by synchrotron-source Fourier transform spectroscopy reveal that water is expelled into the surrounding matrix during spherulite growth, and that it diffuses outward ahead of the advancing crystalline front. We compare these profiles to models of water diffusion in rhyolite to estimate timescales for spherulite growth. Using a diffusion-controlled growth law, we find that spherulites can grow on the order of days to months at temperatures above the glass transition. The diffusion-controlled growth law also accounts for spherulite size distribution, spherulite growth below the glass transition, and why spherulitic glasses are not completely devitrified.

The mechanisms underlying the deformation of nanovoids in Ta single crystals are analyzed when they are subjected to cyclic uniaxial deformation using numerical simulations. Boundary and cell-size effects have been mitigated by means of the Quasicontinuum (QC) method. We have considered {approx} 1 billion-atom systems containing 10.9 nm voids. Two kinds of simulations have been performed, each characterized by a different boundary condition. First, we compress the material along the nominal [0 0 1] direction, resulting in a highly symmetric configuration that results in high stresses. Second, we load the material along the high-index [{bar 4}819] direction to confine plasticity to a single slip system and break the symmetry. We find that the plastic response under these two conditions is strikingly different, the former governed by dislocation loop emission and dipole formation, while the latter is dominated by twinning. We calculate the irreversible plastic work budget derived from a loading-unloading cycle and identify the most relevant yield points. These calculations represent the first fully three-dimensional, fully non-local simulations of any body-centered cubic metal using QC.

In the years 1998, 2000, and 2001, long-offset transientelectromagnetic (LOTEM) surveys were carried out at the active volcanoMerapi in Central Java. The measurements investigated the conductivitystructure of the volcanic edifice. Our area of interest, which is belowthe summit and the upper flanks, was investigated using horizontal andvertical magnetic field time derivative data from seventransmitter-receiver setups. Because of topography and athree-dimensional (3-D) underground structure, a 3-D interpretation isused. The method optimizes few parameters of a 3-D model by a stableleast squares joint inversion of the data, providing sufficientresolution capability. Reasonable data fits are achieved with anonhorizontally layered model featuring a very conductive basement belowdepths of 1.5 km. While hydrothermal alteration is also considered, wetentatively explain the high conductivities by aqueous solutions withrelatively high salt contents. A large magma body or a small superficialreservoir below Merapi's central volcanic complex, as discussed by otherauthors, cannot be resolved by the LOTEM data.

New synthetic procedures for the preparation of Ce(cot)2, cerocene, from [Li(thf)4][Ce(cot)2], and Ce2(cot)3 in high yield and purity are reported. Heating solid Ce(cot)2 yields Ce2(cot)3 and COT while heating Ce2(cot)3 with an excess of COT in C6D6 to 65oC over four months yields Ce(cot)2. The solid state magnetic susceptibility of these three organocerium compounds shows that Ce(cot)2 behaves as a TIP (temperature independent paramagnet) over the temperature range of 5-300 K, while that of Ce2(cot)3 shows that the spin carriers are antiferromagnetically coupled below 10 K; above 10 K, the individual spins are uncorrelated, and [Ce(cot)2]- behaves as an isolated f1 paramagnet. The EPR at 1.5K for Ce2(cot)3 and [Ce(cot)2]- have ground state of MJ= +- 1/2. The LIII edge XANES of Ce(cot)2 (Booth, C.H.; Walter, M.D.; Daniel, M.; Lukens, W.W., Andersen, R.A., Phys. Rev. Lett. 2005, 95, 267202) and 2Ce2(cot)3 over 30-500 K are reported; the Ce(cot)2 XANES spectra show Ce(III) and Ce(IV) signatures up to a temperature of approximately 500 K, whereupon the Ce(IV) signature disappears, consistent with the thermal behavior observed in the melting experiment. The EXAFS of Ce(cot)2 and Ce2(cot)3 are reported at 30 K; the agreement between the molecular parameters for Ce(cot)2 derived from EXAFS …

The successful operation of accelerator cavities has to satisfy both rf and mechanical requirements. It is highly desirable that electromagnetic, thermal and structural effects such as cavity wall heating and Lorentz force detuning in superconducting rf cavities can be addressed in an integrated analysis. Based on the SLAC parallel finite-element code infrastructure for electromagnetic modeling, a novel multi-physics analysis tool has been developed to include additional thermal and mechanical effects. The parallel computation enables virtual prototyping of accelerator cavities on computers, which would substantially reduce the cost and time of a design cycle. The multi-physics tool is applied to the LCLS rf gun for electromagnetic, thermal and structural analyses.

This paper presents the results of interviews conducted with 44 business people in 10 states to examine the use of the utility bill as an information mechanism for providing businesses with the relationship between energy consumption and cost. Our results indicate that there are significant barriers to the use of the utility bill as an information tool for energy consumers. Furthermore, we found significant variations among respondents in the information desired from the bill, and differences in decision-making criteria for investments aimed at reducing energy consumption and for those aimed at other forms of waste minimization. These results call into question the applicability of standard market theories in the purchase of energy by most businesses.

We present recent advances in the modeling of beam electron-cloud dynamics, including surface effects such as secondary electron emission, gas desorption, etc, and volumetric effects such as ionization of residual gas and charge-exchange reactions. Simulations for the HCX facility with the code WARP/POSINST will be described and their validity demonstrated by benchmarks against measurements. The code models a wide range of physical processes and uses a number of novel techniques, including a large-timestep electron mover that smoothly interpolates between direct orbit calculation and guiding-center drift equations, and a new computational technique, based on a Lorentz transformation to a moving frame, that allows the cost of a fully 3D simulation to be reduced to that of a quasi-static approximation.

We discuss the status of the NIF ARC, an 8-beam 10-kJ class high-energy petawatt laser, and the future upgrade path of this and similar systems to 100-kJ-class with coherent phasing of multiple apertures.

The Muon Ionization Cooling Experiment (MICE) will demonstrate ionization cooling in a short section of a realistic cooling channel using a muon beam at Rutherford Appleton Laboratory in the UK. The coupling magnet is a superconducting solenoid mounted around four 201MHz RF cavities, which produces magnetic field up to 2.6 T on the magnet centerline to keep muons within the iris of RF cavities windows. The coupling coil with inner radius of 750mm, length of 285mm and thickness of 102.5mm will be cooled by a pair of 1.5 W at 4.2 K small coolers. This paper will introduce the updated engineering design of the coupling magnet made by ICST in China. The detailed analyses on magnetic fields, stresses induced during the processes of winding, cool down and charging, and cold mass support assembly are presented as well.

Motional Stark effect (MSE) measurements constrain equilibrium reconstruction of DIII-D tokamak plasmas using the equilibrium code EFIT. In 2007, two new MSE arrays were brought online, bringing the system to three core arrays, two edge arrays, and 64 total channels. We present the first EFIT reconstructions using this expanded system. Safety factor and E{sub R} profiles produced by fitting to data from the two new arrays and one of the other three agree well with independent measurements. Comparison of the data from the three arrays that view the core shows that one of the older arrays is inconsistent with the other two unless the measured calibration factors for this array are adjusted. The required adjustments depend on toroidal field and plasma current direction, and on still other uncertain factors that change as the plasma evolves. We discuss possible sources of calibration error for this array.

In this paper, we report shock-induced new grains and residual lattice tension in tantalum single crystals. The single crystals with orientations in [001], [011], [111], and [123] directions are shocked at {approx}55 GPa in gas gun under almost identical conditions. New grains in the shocked crystals are revealed by x-ray scanning analysis. Rather than lattice compression that is frequently probed by in situ x-ray diffraction technique, we find significant residual lattice tension in the recovered tantalum crystals. Such residual lattice tension is attributed to the dislocation cells and their deformation. The dislocation cells are accordingly estimated to be greater than 100 nm from broadening of x-ray diffraction peak.

We present the results of applying new object classificationtechniques to difference images in the context of the Nearby SupernovaFactory supernova search. Most current supernova searches subtractreference images from new images, identify objects in these differenceimages, and apply simple threshold cuts on parameters such as statisticalsignificance, shape, and motionto reject objects such as cosmic rays,asteroids, and subtraction artifacts. Although most static objectssubtract cleanly, even a very low false positive detection rate can leadto hundreds of non-supernova candidates which must be vetted by humaninspection before triggering additional followup. In comparison to simplethreshold cuts, more sophisticated methods such as Boosted DecisionTrees, Random Forests, and Support Vector Machines provide dramaticallybetter object discrimination. At the Nearby Supernova Factory, we reducedthe number of non-supernova candidates by a factor of 10 while increasingour supernova identification efficiency. Methods such as these will becrucial for maintaining a reasonable false positive rate in the automatedtransient alert pipelines of upcoming projects such as PanSTARRS andLSST.

The purpose of the MICE spectrometer solenoid is to provide a uniform field for a scintillating fiber tracker. The uniform field is produced by a long center coil and two short end coils. Together, they produce 4T field with a uniformity of better than 1% over a detector region of 1000 mm long and 300 mm in diameter. Throughout most of the detector region, the field uniformity is better than 0.3%. In addition to the uniform field coils, we have two match coils. These two coils can be independently adjusted to match uniform field region to the focusing coil field. The coil package length is 2544 mm. We present the spectrometer solenoid cold mass design, the powering and quench protection circuits, and the cryogenic cooling system based on using three cryocoolers with re-condensers.

Bacteria of the Bacillus cereus group are known to cause food poisoning. A rare phylogenetically remote strain, NVH391-98, was recently characterized to encode a particularly efficient cytotoxin K presumably responsible for food poisoning. This pathogenic strain and its close relatives can be phenotypically distinguished from other strains of the B. cereus group by the inability to grow at temperatures below 17 degrees C and by the ability to grow at temperatures from 48 to 53 degrees C. A temperate phage, phBC391A2, residing in the genome of NVH391-98 allows us to distinguish the three known members of this thermophilic strain cluster.