Abstract: "The sensitivity to fast neutrons of a CP Meter ionization chamber of the type used for health physics beta and gamma survey measurements has been investigated."

The following report describes polarographic methods that determine saturated aliphatic carbonyl compounds.

Introduction: "The adoption of aluminum nitrate as salting agent in the Redox process made it imperative that a method be available for determining plutonium in the presence of aluminum. However, large amounts of aluminum have been found to interfere with the determination of plutonium by the lanthanum fluoride procedure. Previous attempts to increase the accuracy of the lanthanum fluoride method, by precipitating LaF3 from 4 M HF (rather than 2 M), have been successful only when the initial plutonium level was high."

The following report describes methods used to determine tributylphosphate in a deodorized shell base. An infrared absorption method is developed to emphasize toward determination of TBP in RCW streams, the organic waste streams.

The following memorandum outlines the procedures used on the neutralization of HNO3 in redox ICU and IAW streams, and the factors influencing their choice. The procedures involve a) hexone removal by evaporation in the presence of a retardant, b) destruction of the retardant, c) nitric acid elimination by boiling with aluminum and d) concentration of the remaining solution by evaporation.

This report discusses the calcination or heating of UO₃. When UO₃ is heated, it loses ionic impurities and can produce uranyl peroxide.

This report discusses the production of plutonium metal through the reduction of plutonium tetra fluoride with calcium metal and sulfur. It elaborates that iodine, which was originally used instead of calcium metal, presented several practical problems, but reductions completed with calcium were unsatisfactory.

From introduction: "The purpose of this report is to summarize some of the observations on the dispersion and rate of disengaging of liquid-liquid systems and suggest some possible lines of future work."

This report discusses the the surface characteristics of virgin and irradiated artificial graphites and the changes which occur upon irradiation.

The following report records a total of forty-nine graphite core samples that have been bored from process tube blocks in the Hanford piles with the intention to provide results to indicate that core boring is an entirely practical operation over bore scraping in obtaining powder samples.

The following report calculates pile reactivity changes that result from different pile loadings where it is desirable to have available values of (flux)2 d(volume) for various flat zone radii. This information was found for a cylindrical pile having circular flat zones and an effective radius of 598 cm., by integrating over a cross sectional volume of one cm. thickness.

Objective: The objective of this study is to develop a simple method of either removing the C1- ion from the RAW or converting the ion into a less corrosive valence state.

A research and development program aimed at devising processes for the economical recovery of the potentially valuable long-lived fission products from Purex waste has been under wat at Hanford for several years. When this work has begun, the concentrated waste was primarily a nitric acid solution (6 to 10 M HNO3) containing the fission products and relatively small concentrations of iron, sulfate, and other corrosion products. Flowsheets based on classical separation schemes and rather similar to processes used by the Isotopes Division at the AEC's Oak Ridge operation served to separate the desired fission products from one another and from the corrosion products (1,2,3).These separation schemes employed careful step-wise pH adjustment to precipitate first the iron and then to separate the desired fission products from one another. The flowsheets were demonstrated on a pilot-plant scale with full-level plant waste. However, since the earlier work was complete, plant operations have been modified....

Considerable interest has developed in the use of ion-exchange in the nuclear energy field in the last decade. Aside from the obvious use of providing demineralized coolant water for reactors, the projected uses of ion-exchange include the recovery of fission products from aquaeous waste streams and the separation and purification of fissionable materials from spent reactor fuels. The latter process may be incidental to the over-all operation, as is the case with the Purex anion exchange facility, or it may be the prime separation process, as may be the case in the recovery of Pu or U from spent power reactor (PRTR) fuel elements.

Thermal oxidation of graphite in flowing CO2 is being studied at 650 to 850 C, in a single-pass gas system at atmospheric pressure, by observing weight loss rates. The method is used to provide comparative data for candidate reactor graphites. The effects on oxidation rates of graphite purity, structure, coke type, graphitization temperatures and other manufacturing variables are determined. In addition, the effects of gas flow rates and graphite surface to volume ratios are observed.

Four capsules containing Al-1.65 w/o Pu and Al-12 w/o Si-1.65 w/o Pu were charged into the MTR. These capsules will be irradiated to a burnup of 80-100% of the plutonium atoms to determine the stability of the material at high exposures. An additional sixteen capsules containing 5 to 20 w/o Pu in Al and Al-Si have been prepared. Eight are awaiting reactor space and should be charged soon. The remaining eight are being recanned to increase the end gap between the core and the can. Also four capsules containing high density UO2-PuO2 pellets canned in Zircaloy are awaiting assignment of reactor space.

The Zircaloy-a clad, swaged UOa, 19-rod cluster fuel element for the PRTR was designed to use Zircaloy-a wire spirally wrapped around the fuel rods as spacing members. Such use of unbonded, Zircaloy-a spacers introduced the possibility of fretting corrosion. This paper reports preliminary irradiation tests conducted to determine whether or not such corrosions occurs in this fuel element design.

The basic process for fabricating a swaged fuel rod is simple, easy to control and inexpensive. A zircaloy tube is filled with uranium dioxide powder, the ends temporarily plugged and the loaded tube is swaged to compact the UO2 powder to the required density. The swaged rod is then cut to length and counterbored and then end cape are welded into each end. After several tests and inspections, nineteen rods which meet the quality standards are assembled into a single fuel element ready for irradiation.

Thermal spikes occurring during the life of a slug in a pile cause a momentary destruction of the original configuration of atoms in the metal. This process occurs at such a rate that in a thermal neutron flux of 10(13) neutrons per square centimeter per second each atom in the metal will be subject to temperatures above the melting point of uranium every 40 minutes.

Removal of particles from air is discussed in terms of three classes of filtering media--air-sampling, respirator, and air-cleaning. Plots of efficiency versus filtering velocity are presented. The pressure drop characteristics of the filters are discussed in terms of initial pressure drops of the clean filters, variations in pressure drop of the individual filters, and comparison of loading rates.

In 1949 Barad presented two solutions to the general diffusion equation. Basic in both solutions is the assumption that in very stable atmospheres a point source may be replaced by a vertical area of uniform concentration at a short distance downwind. This vertical area is considered to exist at the distance at which the plume finally "levels-off" and assumes a flat ribbon-like appearance. In addition if the distance over which diffusion takes place is limited to one or two miles and if only the stable atmosphere with its narrow range of eddy sizes is considered, the average diffusion co-efficient (K) has a signficance which it does not have in the case of neutral equilibrium.

Plankton collected from the Columbia River by the net method and by the centrifuge method were compared. The centrifuged plankton (nannoplankton) exceeded the net plankton in weight, in abundance of organisms and in radioactivity. Similar seasonal trends were present in both types of plankton.

The automatic polarograph is ideally suited for the analysis of waste streams for uranium in the Metal Recovery Process, and with modification, it is applicable to other processes, pilot plants, and even to laboratory set ups. The instrument is simple, dependable, and relatively trouble free in operation. It provides an immediate record of the uranium in the waste and, through better control of the process, lower processing costs.

Various non-linear calculations for heat conduction in an istropic, homogeneous medium are presented.