This document contains 3 reports dealing with the delayed effects of radiation on the eyes of survivors of the atomic explosions in Hiroshima and Nagasaki. In the first study, 1000 persons who were listed as having been in the open and within two kilometers of the hypocenter at the time of the explosion were selected at random from the census files of the Atomic Bomb Casualty Commission for study. In addition, 231 others, comprising the total available number of surviving persons listed at present in the census files as having been within one kilometer of the hypocenter, were examined, as were several hundred others who were contacted through newspaper publicity, referrals from local ophthalmologists, or through hearsay. The survey resulted in bringing in persons having, or having had, a variety of ocular conditions. Those connected with the atomic bomb included the following diagnoses; multiple injuries of eyes and eyelids; keratoconjunctivitis from ultraviolet and ionizing radiations; thermal burn of the cornea and of the retina; retinitis proliferans; and radiation cataracts. The cataracts were the only delayed manifestations of ocular injury from the atomic bomb. The second paper is a case report of a histopathologic study of atomic bomb radiation cataract. The …

Water use in the pulp and paper industry is very significant, and the U.S. pulp and paper industries as well as other processing industries are actively pursuing water conservation and pollution prevention by in-process recycling of water. Bleach plant effluent is a large portion of the water discharged from a typical bleached kraft pulp mill. The recycling of bleach plant effluents to the kraft recovery cycle is widely regarded as an approach to low effluent bleached kraft pulp production. The focus of this work has been on developing an electrodialysis process for recycling the acidic bleach plant effluent of bleached Kraft pulp mills. Electrodialysis is uniquely suited as a selective kidney to remove non-process elements (NPEs) from bleach plant effluent before they reach the chemical recovery cycle. Using electrodialysis for selective NPE removal can prevent the problems caused by accumulation of inorganic NPEs in the pulping cycle and recovery boiler. In this work, acidic bleach plant filtrates from three mills using different bleaching sequences based on chlorine dioxide were characterized. The analyses showed no fundamental differences in the inorganic NPE composition or other characteristics among these filtrates. The majority of total dissolved solids in the effluents were found to be …

None

None

The confirmation of the Cabibbo-suppressed charm baryon decay mode {Lambda}{sub c}{sup +} {yields} p{pi}{sup +}{pi}{sup -} is reported. All data analyzed are from SELEX, a fixed target experiment at Fermilab that took data during 1996 and 1997, mainly with a 600 GeV/c {Sigma}{sup -} beam. The branching ratio of the Cabibbo-suppressed decay mode {Lambda}{sub c}{sup +} {yields} p{pi}{sup +}{pi}{sup -} relative to the Cabibbo-favored mode {Lambda}{sub c}{sup +} {yields} pK{sup -}{pi}{sup +} is measured to be: {Gamma}({Lambda}{sub c}{sup +} {yields} p{pi}{sup +}{pi}{sup -})/{Gamma}({Lambda}{sub c}{sup +} {yields} pK{sup -}{pi}{sup +}) = 0.103 {+-} 0.022.

None

None

None

Supersymmetry, extension of the Standard Model of Particle Physics (SM), is searched for by trying to observe the supersymmetric partner of bottom quark ({tilde b}). This search is performed using events with a final state comprising two acoplanar b-quark jets and missing transverse energy (MET) and coming from a sample of 992 pb{sup -1} of data collected by the D0 detector at the Tevatron, the Fermilab p{bar p} collider. The absence of an excess of events in comparison to MS expectations leads to exclude sb masses up to 201 GeV, neutralino masses up to 94 GeV. The MET has been studied under two points of view, because of its fundamental role in this search. First, at the level of the trigger system which allows the online selection candidate events, and then, within the framework of the ALPGEN generator, the simulation of the Z boson transverse momentum which appears as MET when the Z boson decays into neutrino.

In the Standard Model (SM) of the elementary particles, the interactions among the known fundamental fermions (leptons and quarks) are mediated through gauge bosons which obey the symmetry: SU(3) {circle_times} SU(2) {circle_times} U(1). More precisely, the electroweak interaction [4-6] is described by a gauge symmetry SU(2) {circle_times} U(1) which is broken spontaneously. The electroweak symmetry breaking is implemented by the introduction of a complex scalar Higgs field which has a non-zero vacuum expectation value (vev). This way, the lagrangian of the theory remains invariant under SU(2) transformations, but quantization of the fields must start from a ground state which does not exhibit this symmetry, and therefore the full symmetry of the lagrangian is not manifest. Invariance of the theory under local SU(2) transformations implies the presence of vectorial gauge fields which mediate the electroweak interactions. The so called spontaneous symmetry breaking allows the quanta of these gauge fields, the W and Z bosons, to acquire a finite mass. The photon, the particle which mediates the electromagnetic interaction, remains massless. The Higgs boson is one of only two particles in the SM which have not yet been directly observed (the other is the {nu}{sub {tau}}, although there is indirect evidence of …

None

None

Twenty-one papers are included. Separate abstracts were prepared for five. Fifteen papers in Spanish and one summary are listed by title. (MHR)

The well-logging operations performed in the Miravalles Geothermal Field in Costa Rica were conducted during two separate field trips. The Phase I program provided the deployment of a suite of high-temperature borehole instruments, including the temperature/rabbit, fluid sampler, and three-arm caliper in Well PGM-3. These same tools were deployed in Well PGM-10 along with an additional survey run with a combination fluid velocity/temperature/pressure instrument used to measure thermodynamic properties under flowing well conditions. The Phase II program complemented Phase I with the suite of tools deployed in Wells PGM-5, PGM-11, and PGM-12. 4 refs., 25 figs., 1 tab.

A geothermal assessment of six previously identified sites in Honduras has been conducted by a team comprised of staff from the Los Alamos National Laboratory, the US Geological Survey, and the Empresa Nacional de Energia Electrica. The application of both reconnaissance and detailed scale techniques lead to the selection of Platanares in the Department of Copan as the highest potential site. Additional work resulted in the completion of a prefeasibility study at Platanares. We present here a tabulation of the work completed and short summaries of the results from these technical studies. We also present a brief model of the geothermal system and recommendations for additional feasibility work. Both English and Spanish versions of this report are provided in the same document. 18 figs., 5 tabs.

Chinese translation of the Using Waste Heat for External Processes fact sheet. Provides suggestions on how to use waste heat in industrial applications. The temperature of exhaust gases from fuel-fired industrial processes depends mainly on the process temperature and the waste heat recovery method. Figure 1 shows the heat lost in exhaust gases at various exhaust gas temperatures and percentages of excess air. Energy from gases exhausted from higher temperature processes (primary processes) can be recovered and used for lower temperature processes (secondary processes). One example is to generate steam using waste heat boilers for the fluid heaters used in petroleum crude processing. In addition, many companies install heat exchangers on the exhaust stacks of furnaces and ovens to produce hot water or to generate hot air for space heating.

Since 1987 the U.S. has focused research and development activities relevant to the disposal of commercial used nuclear fuel and U.S. Department of Energy (DOE) owned spent nuclear fuel and high level waste on the proposed repository at Yucca Mountain, Nevada. At the same time, the U.S. successfully deployed a deep geologic disposal facility for defense-related transuranic waste in bedded salt at the Waste Isolation Pilot Plant. In 2009 the DOE established the Used Fuel Disposition Campaign (UFDC) within the Office of Nuclear Energy. The Mission of the UFDC is to identify alternatives and conduct scientific research and technology development to enable storage, transportation and disposal of used nuclear fuel and wastes generated by existing and future nuclear fuel cycles. The U.S. national laboratories have participated on these programs and has conducted research and development related to these issues to a limited extent. However, a comprehensive research and development (R&D) program investigating a variety of geologic media has not been a part of the U.S. waste management program since the mid 1980s. Such a comprehensive R&D program is being developed in the UFDC with a goal of meeting the UFDC Grand Challenge to provide a sound technical basis for absolute …

The purpose of this report is to collect in one publication and fit together work fragments presented in many conferences in the multi-year time span starting 2002 to the present dealing with the problem of large pore formation in U-Mo/Al dispersion fuel plates first observed in 2002. Hence, this report summarizes the excerpts from papers and reports on how we interpreted the relevant results from out-of-pile and in-pile tests and how this problem was dealt with. This report also provides a refined view to explain in detail and in a quantitative manner the underlying mechanism of the role of silicon in improving the irradiation performance of U-Mo/Al.

The Swift parallel scripting language allows for the specification, execution and analysis of large-scale computations in parallel and distributed environments. It incorporates a data model for recording and querying provenance information. In this article we describe these capabilities and evaluate interoperability with other systems through the use of the Open Provenance Model. We describe Swift's provenance data model and compare it to the Open Provenance Model. We also describe and evaluate activities performed within the Third Provenance Challenge, which consisted of implementing a specific scientific workflow, capturing and recording provenance information of its execution, performing provenance queries, and exchanging provenance information with other systems. Finally, we propose improvements to both the Open Provenance Model and Swift's provenance system.

In the Standard Model of particle physics, the Higgs boson generates elementary particle masses. Current theoretical and experimental constraints lead to a Higgs boson mass between 114.4 and 158 GeV with 95% confidence level. Moreover, Tevatron has recently excluded the mass ranges between 100 and 109 GeV, 158 and 175 GeV with 95% confidence level. These results gives a clear indication to search for a Higgs boson at low mass. The D0 detector is located near Chicago, at the Tevatron, a proton-antiproton collider with an energy in the center of mass of 1.96 TeV. The topic of this thesis is the search for a Higgs boson in association with a Z boson. This channel is sensitive to low mass Higgs boson (<135 GeV) which has a branching ratio H {yields} bb varies between 50% and 90% in this mass range. The decay channel ZH {yields} {nu}{bar {nu}}b{bar b} studied has in the final state 2 heavy-flavor jets and some missing transverse energy due to escaping neutrinos. The heavy-flavor jets identification ('b-tagging') is done with a new algorithm (SLTNN) developped specifically for semi-leptonic decay of b quarks. The Higgs boson search analysis was performed with 3 fb{sup -1} of data. The …

In this work the S-wave component of the K{pi} amplitude from decay of D{sup +} {yields} K{sup -}{pi}{sup +}{pi}{sup +} it is directly measured. The data come from the Fermilab E831/FOCUS experiment. The amplitude measurement is made using the partial wave analysis without any preliminary assumption about the nature of the S-wave component of the K{pi} system. The phase and magnitude of the S-wave amplitude are generic functions to be determined directly through the Dalitz plot fit. For the sake of comparison, our results the same decay is analyzed using the isobar model, which is the standard way to analyze the Dalitz plot. The data fit obtained with the partial wave analysis is better than the data fit from the isobar model. The phase variation with respect to the invariant mass K{pi} is compared with the measurement of the phase {delta}{sub I=1/2}{sup 0} (m{sub K{pi}}) from K{pi} {yields} K{pi} scattering. The difference between both analysis is discussed considering: a difference in the composition of the isospin components I = 1/2 and I = 3/2 of the K{pi} system between D{sup +} decay and the K{pi} {yields} K{pi} scattering; and the final state interaction involving all particles from decay.

Solar domestic hot water systems have been installed at Camp Darby and the Leghorn Army Depot near Livorno, Italy, by the United States Army. These systems range from single panel installations providing hot water to maintenance shops to large multipanel systems serving barracks. Guidance provided in this bilingual (English-Italian) report includes operating and maintenance procedures and recommendations for spare parts inventory. Operating procedures address start-up, normal operations, shut-down, and response to abnormal conditions; maintenance procedures address collector fluid drainage and replacement and equipment change-out. Flow diagrams reflecting as-built conditions are also included for many of the systems. Water quality and corrosion control are also discussed.

In this work, we establish an on-line optimization framework to exploit detailed weather forecast information in the operation of integrated energy systems, such as buildings and photovoltaic/wind hybrid systems. We first discuss how the use of traditional reactive operation strategies that neglect the future evolution of the ambient conditions can translate in high operating costs. To overcome this problem, we propose the use of a supervisory dynamic optimization strategy that can lead to more proactive and cost-effective operations. The strategy is based on the solution of a receding-horizon stochastic dynamic optimization problem. This permits the direct incorporation of economic objectives, statistical forecast information, and operational constraints. To obtain the weather forecast information, we employ a state-of-the-art forecasting model initialized with real meteorological data. The statistical ambient information is obtained from a set of realizations generated by the weather model executed in an operational setting. We present proof-of-concept simulation studies to demonstrate that the proposed framework can lead to significant savings (more than 18% reduction) in operating costs.

An evidence of the existence of leptoquarks (LQ) would prove the validity of various extensions of the Standard Model of Particle Physics (SM). The search for first generation leptoquarks presented in this dissertation has been performed by analyzing a 1.02 fb{sup -1} sample of data collected by the D0 detector, events with a final state comprising two light jets and two electrons. The absence of an excess of events in comparison to SM expectations leads to exclude scalar LQ masses up to 292 GeV and vector LQ masses from 350 to 458 GeV, depending on the LQ-l-q coupling type. The great importance of a good jet energy measurement motivated the study of the instrumental backgrounds correlated to the calorimeter, as much as studies of the hadronic showers energy resolution in {gamma} + jets events.