Recently, 3D printing has received increasing attention for the fabrication and assembly of electrodes for batteries due to the freedom of creating structures in any shape or size, porosity, flexibility, stretchability, and chemistry. Particularly, zinc ion batteries (ZIBs) are favored due to high safety, cheap materials cost, and high volumetric capacity (5,849 mAh/cm3), however, rapid evaporation of Zn due to low melting temperature has limited its 3D printability via conventional laser-based additive manufacturing technique. Here, we develop a printable ink for the fabrication of flexible and 3D printed Zn anode with varied surface areas using the direct ink writing (DIW) method. Our 3D printed porous and high surface area Zn anode structures effectively suppressed the dendrite growth while providing high Zn ion diffusion towards the cathode to significantly enhance the performance of ZIB. By varying filament distancing and path, we 3D printed zinc anode structures with different active surface areas, surface area to volume ratio, porosity, flexible and multiple layer structures that can be incorporated on any device. Carbon in the composite improved conductivity, and mechanical stability of 3D printed zinc anode. Our 3D printed composite anodes allowed flexible designing of batteries surpassing conventional battery designs such as coin cells …

The interest toward Mars exploration has been considerably increasing due to also the successful deployment of the Perseverance rover and the continuous tests developed by SpaceX's launch vehicle, Starship. While the Mars 2020 mission is currently in progress, the first controlled flight on another planet have been proven in April 2021 with the vertical take-off and landing of the Ingenuity rotorcraft on Mars. In addition, the rotorcraft Dragonfly is expected to achieve the same endeavor in Titan, the largest moon of Saturn, by 2036. Continuous efforts have been oriented toward the development of new technologies and aircraft configurations to improve the performance of current proposed designs to achieve powered flight in different planetary bodies. This thesis work is a preliminary study to develop a comprehensive analysis over the generation of optimum airfoil geometries to achieve vertical flight in environments where low Reynolds numbers and Mach number equal to 0.2 and 0.5.

This thesis describes the experimental and numerical investigation of a novel cold-formed steel 48ft and 54ft long span truss. The truss we designed was to be used as the roofs of large buildings, such as warehouses, hangars, sports arenas. The investigation includes both experimental and numerical testing, the experimental testing of the truss under uniform loads (increasing loads) to determine its deflection and load carrying capacity. The numerical test included developing a finite element model of the truss in SolidWorks and using a finite element model of the truss in ABAQUS to simulate the experimental tests. The findings of this study can be used to improve the design of cold-formed steel long span trusses. The study also provides valuable information for future studies on the modeling of trusses with different cold-formed steel members and the behavior of trusses under load.

Non-imaging Fresnel lenses have been playing an important role in improving the efficiency of the solar energy systems. Many researchers and scientists have devoted their research to optimize the design of the Fresnel lenses. Before it can contribute to energy efficiency increase, a Fresnel lens with optimized design will first need to be fabricated with the most cost-effective method as well as the best quality fabrication as possible. If targeted in a commercial market, feasibility of mass production with a minimum fabrication time would also be a consideration. To bring the design optimization of a Fresnel lens from a conceptual theory to a real-life increase in energy efficiency, the lens needs to be fabricated, tested, compared, and analyzed. This research thesis is intended to explore the performance of the lenses with optimized design through experimental investigations. The design optimization was achieved by a previous PhD student at UNT. A total of six lenses fabricated with four different methods along with two purchased lenses were tested with two different approaches. Multiple testing routes were conducted within a 10-month period to observe the effects of material decomposition and degradation on the lens performance. The resulting experimental data has provided a solid base …

Lignocellulose is the most abundant biopolymer on earth and offers excellent potential for sustainable manufacturing. Because lignocellulose is structurally complex and resistant to decomposition, innovative degradation strategies are necessary to unlock its value. In this dissertation, a green manufacturing process through enzyme-triggered self-cultured bacteria retting for lignocellulosic fiber was developed and investigated. The mechanism of the lignocellulosic fiber retting at a controlled degradation strategy was studied. This enzymatic degradation strategy utilizes a small amount of enzyme to trigger a large aggregation of specific bacteria to obtain clean fibers. Industrial hemp (Cannabis sativa L.) fiber was successfully retted with this strategy. The degradation of pectin was proved through an environmental scanning electron microscope and reducing sugar analysis. The bacterial successions were identified by 16S rRNA gene metagenomic sequencing. The results showed that Bacillaceae dominated the hemp retting conditions containing 1% pectinase, suggesting that pectinase can manipulate bacterial community succession by changing the nutrients available to bacteria through the degradation of pectin. This degradation strategy has 20-25% less environmental impact than the thermochemical degradation strategy, resulting in better fiber consistency and much shorter processing time (3-5 days) than the traditional water degradation strategy. The study on the degradation of lignin-rich lignocellulose also …

This thesis details the creation and application of a generalized process plan for the hybrid manufacturing of AISI 316L stainless steel, using direct energy deposition (DED) and ball-nose end-mill machining, that includes the inspection and measurement of objects created by that hybrid manufacturing process plan. The proposed process plan progresses through the selection of substrate thickness, single-track, multi-track, and multi-layer depositions, then on to machining processing. A manufacturers' recommended set and range of DED parameters were used to create a designed experiment that aided in the analysis of objects created in each of the DED process planning steps; those objects were then machined in the same enclosure using a set of machining parameters screened from industry recommendations for ball-nose milling of stainless steel, after which measurements were taken for surface roughness, some material characteristics, and for tool deterioration. The results, analyses, and discussions collected herein show that the proposed process plan can provide models for geometrical outputs for each step in the plan, some improvements in substrate stability, surface roughness, tool deterioration, and material porosity due to voids. Current research in hybrid manufacturing does not show generalized process planning influences. The process plan as demonstrated by the work in this …

In order to better understand the changes occurring in the internal environment of the pyrolysis process a method of monitoring the internal environment in real time is the key objective of this study. To accomplish this objective four tasks were laid out in order to develop an effective way of monitoring the changes in gases present as pyrolysis is occurring as well as in material activation processing. For all processing the self-activation process was used which combines pyrolysis and thermal activation into a single step process. In the first task 10 hard wood species were activated and the resulting properties were compared to see the impact of wood species on the resulting carbon structures. In order to understand the impact of gas concentration on the resulting carbons the second task developed a gas sensor array which effectiveness was corroborated using GC-MS and then comparisons of the changes in the resulting were made. For the third task the gas sensor array was used to analyze the production of CO2 gas and a triple Gaussian model was developed to model the changes in gas production throughout processing. H2 gas production was modeled in the fourth task using the same Gaussian model as …

Motivated by previous relevant research on phononics including both active and passive phononics, the interest of faster turnability and more functions of the active phononics of further study led to this proposing research topic: magnetic field tunable active functional phononics. The first design of magnetic field tunable reciprocal--non-reciprocal transmission acoustic device was established, material was characterized, and numerical simulation has been performed. The simulation results show clear T-symmetric breaking non-reciprocity due to energy level splitting effect with Doppler effect – an acoustic Zeeman effect. Inspired by this preliminary work, further experiments were planned to demonstrate this effective Zeeman effect in phononics and effectively charged phonons in water based ferro-fluid. The objectives of this work as the next series of tasks were to illustrate acoustic Zeeman effect and acoustic Landau levels in various strength of magnetic field to investigate a design non-reciprocal sound device with magnetic field switching, which could be controlled on the amount of non-reciprocity with the strength of magnetic field. Once this new field first discovered by the proposed study tasks, more active tunable magnetic field phononics devices could be designed and exemplified in terms of both simulations and experiments. Faster and more controllable active phononic devices could …

A flexible nanofibrous PVDF-BaTiO3 composite material is prepared for impact sensing and biomechanical energy harvesting applications. Dielectric polyvinylidene fluoride (PVDF) and barium titanate (BaTiO3)-PVDF nanofibrous composites were made using the electrospinning process based on a design of experiments approach. The ultrasonication process was optimized using a 2k factorial DoE approach to disperse BaTiO3 particles in PVDF solution in DMF. Scanning electron microscopy was used to characterize the microstructure of the fabricated mesh. The FT-IR and Raman analysis were carried out to investigate the crystal structure of the prepared mesh. Surface morphology contribution to the adhesive property of the composite was explained through contact angle measurements. The capacitance of the prepared PVDF- BaTiO3 nanofibrous mesh was a more than 40% increase over the pure PVDF nanofibers. A comparative study of dielectric relaxation, thermodynamics properties and impact analysis of electrospun polyvinylidene fluoride (PVDF) and 3% BaTiO3-PVDF nanofibrous composite are presented. The frequency dependent dielectric properties revealed micro structural features of the composite material. The dielectric relaxation behavior is further supported by complex impedance analysis and Nyquist plots. The temperature dependence of electric modulus shows Arrhenius type behavior. The observed non-Debye dielectric relaxation in electric loss modulus follows a thermally activated process which …

Pillared-graphene structure (PGS) is a novel three-dimensional structure consists of parallel graphene sheets that are separated by carbon nanotube (CNT) pillars that is proposed for efficient thermal management of electronics. For microscale simulations, finite element analyses were carried out by imposing a heat flux on several PGS configurations using a Gaussian pulse. The temperature gradient and distribution in the structures was evaluated to determine the optimum design for heat transfer. The microscale simulations also included conducting a mesh-independent study to determine the optimal mesh element size and shape. For nanoscale simulations, Scienomics MAPS software (Materials And Processes Simulator) along with LAMMPS (Large-scale Atomic/ Molecular Massively Parallel Simulator) were used to calculate the thermal conductivity of different configurations and sizes of PGS. The first part of this research included investigating PGS when purely made of carbon atoms using non-equilibrium molecular dynamics (NEMD). The second part included investigating the structure when supported by a copper foil (or substrate); mimicking production of PGS on copper. The micro- and nano-scale simulations show that PGS has a great potential to manage heat in micro and nanoelectronics. The fact that PGS is highly tunable makes it a great candidate for thermal management applications. The simulations were …

In this research thermal properties enhancement of phase change material (PCM) using boron nitride nanomaterials such as nanoparticles and nanotubes is studied through experimental measurements, finite element method (FEM) through COMSOL 5.3 package and molecular dynamics simulations via equilibrium molecular dynamics simulation (EMD) with the Materials and Process Simulations (MAPS 4.3). This study includes two sections: thermal properties enhancement of inorganic salt hydrate (CaCl2∙6H2O) as the phase change material by mixing boron nitride nanoparticles (BNNPs), and thermal properties enhancement of organic phase change material (paraffin wax) as the phase change material via encapsulation into boron nitride nanotubes (BNNTs). The results of the proposed research will contribute to enhance the thermal transport properties of inorganic and organic phase change material applying nanotechnology for increasing energy efficiency of systems including electronic devices, vehicles in cold areas to overcome the cold start problem, thermal interface materials for efficient heat conduction and spacecraft in planetary missions for efficient thermal managements.

The recipes of optical radiative properties manipulation are their materials chemistry, nano/microscale geometry, and transport properties of quasiparticle carriers such as photons, phonons, and electrons. The important technical element in optical properties is the dielectric function of materials, which is different for metals, dielectrics, 2D materials, and phase transition materials. Graphene has a unique electrical conductivity profile which have metallic nature depending on the frequency, but also has a negative thermal expansion coefficient that makes graphene unique. Hence, graphene creates wrinkles when deposited on the substrate as temperature decreases to room temperature from high substrate temperature. We also study phase transition material, particularly vanadium dioxide that transitions from insulating to metallic phase based on temperature change; we investigate its role in far-field thermal radiation. Other transition metal oxides are studied as a thermally and electrically tunable plasmonic gratings: Transition metal oxides include vanadium dioxide, tungsten trioxide, and molybdenum trioxide. The work demonstrates plasmonic phenomena and absorptance/emittance tunability. First, surface plasmon polariton along the graphene (SPPG) when wrinkles are formed above the plasmonic grating is studied. The resonance peak shift is modeled for both magnetic polariton (MP) with inductor-capacitor (LC) circuit and SPPG with Fabry-Perot phase change model. Second, the self-adaptive …