Tests in a one-fifth scale clear plastic model were conducted to investigate the flow characteristics of the asymmetrical riser configuration in the Consumers Big Rock power plant.

This report presents the results of an analysis which was undertaken to investigate the power stability of the Consumers Big Rock Point Nuclear Power Reactor.

This report considers the theoretical evaluation of a system for gaining increased control strength and increased control lifetime and presents a theoretical model which is applicable to conventional multigroup diffusion theory.

Abstract; Technical report describing a low-flow autoclave system developed for out-of-pile corrosion testing of materials in controlled environment steam up to 500 C. The system has been set up in triplicate to provide for the exposure of various zirconium alloys to steam at 300, 400, and 500 C. The oxygen and hydrogen of the steam were controlled at 25 ppm and 3 ppm, respectively, to simulate the gas conditions from radiolytic water decomposition found in a boiling water reactor. The autoclave internals were so designed to result in a temperature variation between specimens under test of less than 2C.

A process was developed in which stainless steel-clad UO2 fuel rods are fabricated by high-temperature coextrusion. The process has a potential of being a more economical method for the preparation of stainless steel-clad UO2 fuel rods than the conventional pellet process. Consequently, it was considered advantageous to evaluate the irradiation characteristics of fuel rods fabricated in this manner. Therefore, 24 coextruded fuel rods were manufactured for evaluation in a reactor. The required amounts of UO2 and clad were soaked in separate containers at 1875 and 760 degree C, respectively. The containers were removed from their respective furnaces and were coextruded in one pass. A force of 450 to 475 tons was used, and a reduction ratio of 18 to 1 was obtained. The coextruded rods were cut to the approximate length, and the ends were sealed with an acid-resistant tape. The carbon steel can covering the stainless steel clad was removed by immersion in 1:1 nitric acid for 20 minutes. The rods were visually inspected, the specified lengths of clad and fuel were obtained by machining, and the correct diameter was obtained by belt sanding. The fabrication of the fuel rods was completed by inserting the plenum support tubes and …

The extrusion forming of ceramic powders may be economically interesting in the field of nuclear fuel fabrication. When applied to the forming of rod-type uranium dioxide fuel, extrusion processes have been able to produce cylindrical bodies with length-to-diameter ratios much greater than those of the conventional die-pressed pellets. Furthermore, after being sintered, the extrusions have exhibited densities at least as high as those of sintered pellets. Thus, extrusion forming may offer reductions in handling during fabrication and, at the same time, provide a fuel with improved performance characteristics by decreasing the number of discontinuities in the fuel column. This report reviews the production of these extrusions, sets forth some of their characteristics, describes the materials and processes employed in cladding them, and records the pre-irradiation data pertaining to the finished fuel rods and fuel assembly. Irradiation of the fuel assembly in the VBWR was initiated on July 17, 1962.

Summary: Stainless steel clad nuclear fuel cycle costs can be reduced to those associated with Zircaloy clad fuel or potentially lower by reducing the thickness of the clad tube wall until performance penalties offset the savings associated with the reduction in parasitic neutron absorption. To demonstrate the feasibility and investigate performance capabilities of thin clad fuel rods for power reactor application an assembly was fabricated with 0.0127 cm (5 mil) thick stainless steel cladding tubes for irradiation testing in the Vallecitos Boiling Water Reactor (VBWR). The fuel bundle was placed in the VBWR and irradiation was begun in November, 1961. The irradiation is scheduled to continue until the target exposure of 2.74 x 10(20) fissions/cc (10,000 MWD/T of uranium) average burnup is reached. Destructive examinations of fuel rods will be performed at regular intervals throughout life to determine fuel rod performance.

Summary: "The various design features significant to superheat are described for the 12-1/2 MW., 960 psig, 1050° F, steam-cooled, low-enriched, annular-fueled, experimental superheat reactor built by the General Electric Company at the Vallecitos Atomic Power Laboratory. Results obtained during the first six months of full-power operation, on the emergency cooling system, core thermal performance, and pressure vessel temperatures are presented and compared with predictions. Operating experience with over-all reactor system is also discussed."

In order to investigate the low frequency strain cycle fatigue for tubular sheath geometries an apparatus was designed and fabricated for laboratory and reactor experiments. The design of this apparatus is described herein.

In this paper arbitrary limits of the general fission source gamma problem are set. Then, by assuming cooling of at least one day, it is shown that only twelve different fission product gamma sources need ever be considered.

The basic work for development of a scheduling computer for the Consumers' Big Rock Plant is outlined in this report. The computer's purpose is to make feasible higher power densities by operation closer to fuel element burnout limits, and to maximize fuel burnup.

Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. The development of pulsed neutron source techniques for large power reactors has led to a new theoretical model recently developed by E. Garelis and J.L. Russell, Jr. The theory is presently based on a bare, one-group model with m-delayed precursors and takes all spatial modes into account. Results indicate, however, that the application of this model is much broader. Experiments were designed and carried out to both verify this new theory and to demonstrate the performance of the experimental hardware in a large power reactor.

Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. The experimental work centers around aspects of detecting neutrons in the presence of 10/sup 7/ r/hr gamma fields. Boric acid experiments and Humboldt Bay experiments are reported.

Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. In the course of this program, a new theory was suggested and an experimental apparatus was designed and built. Experiments were carried out to test the new model. This present report contains additional data and information extracted from the experiments at PG&E Humboldt Bay Power Reactor at Eureka, California. During the last days of 1963 a number of control rod and fuel bundle worth measurements were made in the ESADA Vallecitos Experimental Superheat Reactor (EVESR) using the (k[beta]/[script l] technique. A description of the experiments is given in the text of the report and some results are reported. A computer program was written to perform the data analysis of the pulsed neutron experiments and the code is discussed in the Appendix.

Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. The development of pulsed neutron source techniques for large power reactors has led to a new theoretical model recently developed by E. Garelis and J.L. Russell, Jr. The theory is presently based on a bare, one-group model with m-delayed precursors and takes all spatial modes into account. Results indicate, however, that the application of this model is much broader. Experiments were designed and carried out to both verify this new theory and to demonstrate the performance of the experimental hardware in a large power reactor.

The United States and the European Atomic Energy Community (Euratom), on May 29, and June 18, 1958, signed an agreement which provides a basis for co-operation in programs for the advancement of the peaceful applications of atomic energy. The work described in this report represents the Joint U.S.-Euratom effort. The over-all development program is designed to obtain the test data and operating experience necessary to eventually realize a 50 percent increase in the output of the Garigliano Nuclear Power Station located at Sessa Aurunca (Campania, Italy). Two tasks are in progress: Task III-F involves the preparation of test specimens of reactor vessel material for irradiation; Task IV consists of the formulation of specification for a complete data logging and computer system.

The United States and the European Atomic Energy Community (Euratom), on May 29, and June 18, 1958, signed an agreement which provides a basis for co-operation in programs for the advancement of the peaceful applications of atomic energy. The work described in this report represents the Joint U.S.-Euratom effort. The over-all development program is designed to obtain the test data and operating experience necessary to eventually realize a 50 percent increase in the output of the Garigliano Nuclear Power Station located at Sessa Aurunca (Campania, Italy). Two tasks are in progress: Task III-F involves the preparation of test specimens of reactor vessel material for irradiation; Task IV consists of the formulation of specification for a complete data logging and computer system.

The United States and the European Atomic Energy Community (Euratom), on May 29, and June 18, 1958, signed an agreement which provides a basis for co-operation in programs for the advancement of the peaceful applications of atomic energy. The work described in this report represents the Joint U.S.-Euratom effort. The over-all development program is designed to obtain the test data and operating experience necessary to eventually realize a 50 percent increase in the output of the Garigliano Nuclear Power Station located at Sessa Aurunca (Campania, Italy). Two tasks are in progress: Task III-F involves the preparation of test specimens of reactor vessel material for irradiation; Task IV consists of the formulation of specification for a complete data logging and computer system.

The United States and the European Atomic Energy Community (Euratom), on May 29, and June 18, 1958, signed an agreement which provides a basis for co-operation in programs for the advancement of the peaceful applications of atomic energy. The work described in this report represents the Joint U.S.-Euratom effort. The over-all development program is designed to obtain the test data and operating experience necessary to eventually realize a 50 percent increase in the output of the Garigliano Nuclear Power Station located at Sessa Aurunca (Campania, Italy). Two tasks are in progress: Task III-F involves the preparation of test specimens of reactor vessel material for irradiation; Task IV consists of the formulation of specification for a complete data logging and computer system.

The United States and the European Atomic Energy Community (Euratom), on May 29, and June 18, 1958, signed an agreement which provides a basis for co-operation in programs for the advancement of the peaceful applications of atomic energy. The work described in this report represents the Joint U.S.-Euratom effort. The over-all development program is designed to obtain the test data and operating experience necessary to eventually realize a 50 percent increase in the output of the Garigliano Nuclear Power Station located at Sessa Aurunca (Campania, Italy). Two tasks are in progress: Task III-F involves the preparation of test specimens of reactor vessel material for irradiation; Task IV consists of the formulation of specification for a complete data logging and computer system.

The United States and the European Atomic Energy Community (Euratom), on May 29, and June 18, 1958, signed an agreement which provides a basis for co-operation in programs for the advancement of the peaceful applications of atomic energy. The work described in this report represents the Joint U.S.-Euratom effort. The over-all development program is designed to obtain the test data and operating experience necessary to eventually realize a 50 percent increase in the output of the Garigliano Nuclear Power Station located at Sessa Aurunca (Campania, Italy). One task is in progress: Task I - Data Logging and Computer System. The work on the other tasks is being planned and initiated.

Control rod materials, designs, and fabrication processes are compared for their relative economies. Control rod lifetime data are calculated with a simple approximation of nuclear worth depreciation. These data are used in conjunction with the estimated fabrication costs to determine the cost of using several absorber materials in a typical power reactor on a cost-per-year basis. The effect the control system has on core power density and fuel lifetime is included.

Abstract: A general expression which can be used either for predicting the average volumetric concentration or for analyzing and interpreting experimental data is derived. The analysis takes into account both the effect of non-uniform flow and concentration profiles as well as the effect of the local relative velocity between phases. The first effect is taken into account by a distribution parameter, whereas the latter is accounted for by the weighted average drift velocity.

A method of determining enclosure pressure in the event of a reactor rupture is presented and a sample calculation is shown. This method was used in calculating the design pressure of the Dresden Nuclear Power Station enclosure.