The rapid advances in many technologically important areas have not only served to accentuate the increased demands for high temperature metals and ceramics but have necessitated a more through knowledge of their physical properties when exposed to high temperature service. Toward this latter end, the use of X-ray diffraction has proved an invaluable tool in providing data of regions of thermal stability, expansion coefficients, solid solubility limits, and phase transformations by direct examination at temperature. Since this Laboratory has for some time now been engaged in the study of refractory nuclear materials, it was thought desirable to employ and possibly extend this technique to temperatures ranging up to 3000°C. This communication will describe the equipment developed for this purpose, with experimental results to be described in subsequent publications.

Report presenting an investigation at two Mach numbers to examine the flow, force, and moment characteristics associated with spoilers mounted on a flat plate at a range of sweep angles. Pressure measurements were obtained over the plate and spoiler faces. The pressures were integrated to determine the spoiler lift, pitching-moment, drag, and hinge-moment characteristics.

This quarterly progress report of the Aircraft Nuclear Propulsion Project at ORNL records the technical progress of the research on circulating-fuel reactors and other ANP research at the Laboratory under its Contract W-7405-eng-26. The report is divided into three major parts: I. Reactor Theory, Component Development, and Construction, II. Materials Research, and III. Shielding Research. The ANP Project is comprised of about 530 technical and scientific personnel engaged in many phases of research directed forward the achievement of nuclear propulsion of aircraft. A considerable portion of this research is performed in support of the work of other organizations participating in the national ANP effort. However, the bulk of the ANP research at ORNL is directed toward the development of a circulating-fuel type of reactor. The design, construction, and operation of the Aircraft Reactor Test (ART), with the cooperation of the Pratt & Whitney Aircraft Division, are the specific objectives of the project. The ART is to be a power plant system that will include a 60-Mv circulating-fuel reflector-moderated reactor and adequate means for heat disposal. Operation of the system will be for the purpose of determining the feasibility, and the problems associated with the design, construction, and operation, of a …

From Introduction: "Reported herein are the over-all engine performance and the starting and windmilling characteristics. Data are presented in the form of performance maps at each flight condition to show the effects of altitude and flight Mach number on various engine-performance variables. The effect of engine deterioration with operating time on performance is also discussed."

Report describing the results of an orientation study to determine uranium concentrations within the Artillery Peak and Prescott quadrangles in Arizona. It includes concentrations of uranium and 25 other elements based on analysis of wet, dry, and rock samples taken in the area.

Supplementary data containing sediment analyses of sediment samples for uranium and thorium concentrations in the Artillery Peak Quadrangle to accompany a report on U.S. uranium resources in Mohave County, Arizona.

Cell proliferation on the actively growing periosteal surface of the femur of rabbits aged two weeks, has been investigated using autoradiographic techniques. Injections of tritiated glycine and tritiated thymidine were given simultaneously and the animals sacrificed at intervals from one hour to 5 days after injection. The glycine labelled the position of the bone surface at the time of injection and the thymidine labelled the cells which were synthesizing DNA . The rate of increase in the cell population was determined by counting the number of cells beyond the glycine label at different times after injection. The cell kinetics of the fibroblast--pre-osteoblast--osteoblast--osteocyte system has been studied. The fibroblasts are relatively unimportant from the point of view of increase in the cell population. The main site of cell proliferation is the layer of preosteoblasts on the periosteal surface. The rate of movement of cells from the pre-osteoblast to the osteoblast and osteocyte compartments has been measured. The incorporation of osteoblasts into the bone is not a random process, but it appears that the osteoblast must spend a certain time on the periosteal surface before becoming either an osteocyte or a relatively inactive osteoblast lining a haversian canal. During its most active …

A study of the cell kinetics on the actively growing periosteal surface of the femur of rabbits ages two weeks has been continues. A single injection of tritiated thymidine was given and the rabbits killed from one hour to four days after injection. The grain count spectra of the different cell types, pre-osteoblast, osteoblast and osteocyte, have been compared at different times after injection. The results showed evidence for the uptake of thymidine in nuclei which is not associated with cell division. A small percentage of osteoblasts was initially labelled at one hour and there was evidence that the majority of these had not divided by 3 or 4 days after injection. Some thymidine labelled cells had also become osteocytes without division. Furthermore, it appeared that a considerable fraction of the initially labelled pre-osteoblasts did not divide. The S-period for the pre-osteoblasts and osteoblasts was measured using a double-labelled thymidine technique.

"The results obtained from measurements of gust velocities, draft velocities, and ambient-air temperature within thunderstorms for the period from September 11, 1946 to September 16, 1946 at Orlando, Florida are presented herein. These data are summarized in.and presented" (p. 1).

Report presenting an investigation to determine the static characteristics of a two-blade NACA 10-(3)(062)-045 propeller. Experimental data were obtained for a blade-angle range from -5 degrees to 40 degrees measured at the 0.75 radial station and for tip Mach numbers up to 1.0.

The following report describes the use of two experimental facilities used to evaluate the Schenectady Pile. The facilities are divided into nuclear physics and chemistry experiments, and testing of pile components and materials under pile conditions. This document discusses the experiments taken place in these facilities to evaluate the pile.

Report presenting an investigation of the section and panel characteristics and loads obtained from pressure measurements over a 35 degree sweptback wing at level-flight lifts for a range of Mach numbers. Section pressure distributions were taken at the root, midspan, and tip stations of a Douglas D-558-II airplane.

Report presenting an investigation to determine the effects of six stabilizing fin plan forms and three body-nose configurations on the static stability of a 20 degree cone-cylinder body of revolution that had a fineness ratio of 8.65. The fin plan forms tested were swept untapered fins with 45 and 60 degrees sweep angles, trapezoidal fins, and delta fins. Results regarding the normal force coefficient, pitching moment coefficient, and center of pressure are provided.

Studies carried on since 1956 indicate that the prosaic breeding procedure of sibbing among the most perennial segregates in the hybrid of 4n maize x 4n perennial teosinte quickly restores perennialism to 50% maize tetraploids through increasing the expression of the rhizomatous habit under selection pressure. Similarly, only two generations of selection at the 75% maize level have resulted in a progressive recovery of the perennial expressive. A high degree of maize-likeness therefore appears to be compatible with the perennial expression at the 4n level.

"An investigation of the spin and recovery characteristics of a 1/24-scale model of the Grumman AF-2S, -2W airplane was conducted in the Langley 20-foot free-spinning tunnel. The effects of controls on the erect and inverted spin and recovery characteristics for a range of possible loadings of the.airplane were determined. The effect of a revised-tail installation (small dual fins added to the stabilizer of the original tail and the vertical-tail height of the original tail increased) and the effect of various ventral-fin and antispin-fillet installations were determined" (p. 1).

Report issued by the APDA over fuel enrichment processes at the Enrico Fermi Atomic Power Plant. As stated in the introduction, "the results that directly apply to the determination of the enrichment will be given" (p. 6). This report includes tables, and illustrations.

"Aerodynamic tests were made with four geometrically similar metal propellers of different diameters, on a Wright "Whirlwind" J-5 engine in an open cockpit fuselage. The results show little difference in the characteristics of the various propellers, the only one of any importance being an increase of efficiency of the order of 1 per cent for a 5 per cent increase of diameter, within the range of the tests" (p. 107).

Report presents the results of tests conducted on 28 wing-fuselage combinations made in the variable-density wind tunnel as a part of the wing-fuselage interference program being conducted therein and in addition to the 209 combinations previously reported in NACA-TR-540. These tests practically complete the study of combinations with a rectangular fuselage and continue the study of combinations with a round fuselage and a tapered wing.

Report presenting the aerodynamic design and design-point performance of a 16-inch impulse-type supersonic-compressor rotor component with turning to the axial direction, including an off-design and stage performance analysis. Results regarding rotor component performance, discussion of rotor performance, stage consideration for rotor performance, stage performance, and stator performance are provided.

Studies of linkage in polyploids have been exceedingly rare. Only three previous studies of linkage in autotetraploid maize have been reported. Murray (1944), in a limited analysis of crossing over among 4 linked markers in chromosome 2, found varying degree of difference in linkage values between 2n and 4n maize in the three interposed segments. Dempsey (1956) found linkage values wx - c region of chromosome 9 to correspond closely between autotetraploid and diploid maize. More recently Welch (1962), in a more extensive analysis of linkage among the same group of chromosome 2 markers studied earlier by Murray, concluded that although individual progenies varied, linkage values in diploid and tetraploid maize, with some exceptions, are similar. Limited data from one segment of the allotetraploid of perennial teosinte x maize (Emerson and Beadle 1932) probably represent the only reported linkage tabulation in this type of polyploid. A further study of linkage of Zea polyploids seemed worthwhile because of the increasing practical importance of polyploids, of the possibility of adding to fundamental knowledge of tetraploid cytology and genetics, and of the bearing such work may have upon the question of the taxonomic affinities of maize.

Memorandum presenting the methods and instruments used at a particular lab to illustrate the magnitudes of errors associated with Mach number measurements at supersonic speeds and at high altitudes. Data is presented for two modified methods of the basic radar phototheodolite method of position-error calibration.

Initiation of reactions by intermittent irradiation is frequently encountered in physical, chemical, and biological systems. Mathematical expressions for transient and steady state concentrations of reactive species in these systems are useful for predicting performance and for research purposes. A general method of formulation of the intermittent irradiation problem is presented herein, and illustrative solutions are obtained for radioactive decay chains and for the rotating sector method.

Calculations are presented of the fast neutron dose rate, the gamma-ray dose rate, and the thermal neutron flux along the source plate axis in the Lid Tank with the tank filled entirely with water. These calculations are compared with experimental measurements. The calculations are absolute and are compared with absolute measurements.

Report discussing the design, construction, and testing of a pilot plant for the fluidization of uranium trioxide to create uranium tetrachloride. The plant yielded 97.0% "immediately available as product."