The project objective is to explore the generation of soft X-ray laser radiation in a plasma column created by a fast capillary discharge. The proposed capillary lasing scheme offers the potential for compact, simple and efficient soft X-ray laser sources. For this purpose a compact, fast pulse generator which produces 100 kA current pulses with a risetime of 11 ns was constructed. Initial experiments were conducted in evacuated capillaries, in which the plasma is produced by ablation of the capillary walls. The soft X-ray emission from discharges in polyethylene capillary channels was studied to investigate the possibility of amplification in the 3-2 transition of C VI, at {lambda} = 18.2 nm. Time-resolved spectra in which this transition appears anomalously intense with respect to the 4--2 transition of the same ion were obtained. To date, however, this phenomenoa could not be confirmed as gain, as the intensity of the 18.2 nm line has not been observed to increase exponentially as a function of the capillary length. Encouraging results were obtained by fast pulse discharge excitation of capillaries filled with preionized gas. High temperature (Te > 150 eV), small diameter ({approximately}200 {mu}m) plasma columns were efficiently generated. Fast current pulse excitation of …

The project objective is to explore the generation of soft X-ray laser radiation in a plasma column created by a fast capillary discharge. The proposed capillary lasing scheme offers the potential for compact, simple and efficient soft X-ray laser sources. For this purpose a compact, fast pulse generator which produces 100 kA current pulses with a risetime of 11 ns was constructed. Initial experiments were conducted in evacuated capillaries, in which the plasma is produced by ablation of the capillary walls. The soft X-ray emission from discharges in polyethylene capillary channels was studied to investigate the possibility of amplification in the 3-2 transition of C VI, at {lambda} = 18.2 nm. Time-resolved spectra in which this transition appears anomalously intense with respect to the 4--2 transition of the same ion were obtained. To date, however, this phenomenoa could not be confirmed as gain, as the intensity of the 18.2 nm line has not been observed to increase exponentially as a function of the capillary length. Encouraging results were obtained by fast pulse discharge excitation of capillaries filled with preionized gas. High temperature (Te > 150 eV), small diameter ({approximately}200 {mu}m) plasma columns were efficiently generated. Fast current pulse excitation of …

We are making progress on our investigation of the mechanism of olefin exchange with Os{sub 2}(C{sub 2}H{sub 4})(CO){sub 8}. We are probing this system by kinetic study of the reaction of Os{sub 2}(C{sub 2}H{sub 4})(CO){sub 8} with butyl acrylate (BA) under various pressures of ethylene.

We are making progress on our investigation of the mechanism of olefin exchange with Os{sub 2}(C{sub 2}H{sub 4})(CO){sub 8}. We are probing this system by kinetic study of the reaction of Os{sub 2}(C{sub 2}H{sub 4})(CO){sub 8} with butyl acrylate (BA) under various pressures of ethylene.

The entry rate of {sup 22}Rn into a basement structure was measured continuously. These measurements demonstrated that radon entry did not vanish even when the structure was slightly pressurized. This persistent entry has been determined to be dominated by diffusion through the floor and walls and a combination of diffusion and convection through the floor-wall joint. The highest indoor radon concentrations occurred during calm periods when the pressure differentials between the inside and outside of the structure were small. The objectives of this work were to identify the origins of the radon and investigate the entry pathways. The radon could originate either in the concrete or in the soil surrounding the structure. Entry pathways into the basement were through the concrete floor and walls as well as through the floor-wall joint. The contributions of the origins and entry pathways were determined by continuously measuring the radon entry rate into the basement, using a trace gas system, and the flux density through portions of the floor and walls. Radon entry through the floor-wall joint could be controlled using a baseboard barrier system. Results indicated that, during calm conditions with wind speeds less than 1 m s{sup {minus}1}, 25 % of the …

This study was designed to evaluate the effectiveness of aftermarket fuel delivery systems for vehicles fueled by compressed natural gas (CNG) and liquefied petroleum gas (LPG). Most of the CNG and LPG vehicles studied were converted to the alternative fuel after purchase. There are wide variations in the quality of the conversion hardware and the installation. This leads to questions about the overall quality of the converted vehicles, in terms of emissions, safety, and performance. There is a considerable body of emissions data for converted light-duty vehicles, and a smaller amount for medium- and heavy-duty vehicles. However, very few of these data involve real world conditions, and there is growing concern about in-use emissions. This report also attempts to assess factors that could allow in-use emissions to vary from the ``best-case`` results normally reported. The study also addresses issues of fuel supply, fuel composition, performance, safety, and warranty waivers. The report is based on an extensive literature and product survey and on the author`s experience with fuel delivery systems for light-duty vehicles.

This study was designed to evaluate the effectiveness of aftermarket fuel delivery systems for vehicles fueled by compressed natural gas (CNG) and liquefied petroleum gas (LPG). Most of the CNG and LPG vehicles studied were converted to the alternative fuel after purchase. There are wide variations in the quality of the conversion hardware and the installation. This leads to questions about the overall quality of the converted vehicles, in terms of emissions, safety, and performance. There is a considerable body of emissions data for converted light-duty vehicles, and a smaller amount for medium- and heavy-duty vehicles. However, very few of these data involve real world conditions, and there is growing concern about in-use emissions. This report also attempts to assess factors that could allow in-use emissions to vary from the best-case'' results normally reported. The study also addresses issues of fuel supply, fuel composition, performance, safety, and warranty waivers. The report is based on an extensive literature and product survey and on the author's experience with fuel delivery systems for light-duty vehicles.

The limiting role of polycrystallinity in thin-film solar calls has been reduced somewhat during the past year, and efficiencies of both CdTe and CuInSe[sub 2] cells are approaching 15%. Quantitative separation of loss mechanisms shows that individual losses, with the exception of forward recombination current, can be made comparable to their single crystal counterparts. One general manifestation of the extraneous trapping states in that the voltage of all polycrystalline thin-film cells drifts upward by 10--50 mV following the onset of illumination.

The limiting role of polycrystallinity in thin-film solar calls has been reduced somewhat during the past year, and efficiencies of both CdTe and CuInSe{sub 2} cells are approaching 15%. Quantitative separation of loss mechanisms shows that individual losses, with the exception of forward recombination current, can be made comparable to their single crystal counterparts. One general manifestation of the extraneous trapping states in that the voltage of all polycrystalline thin-film cells drifts upward by 10--50 mV following the onset of illumination.