This report summarizes the earthquake activity on Hanford for FY 2002. Hanford Seismic Monitoring provides an uninterrupted collection of high-quality raw and processed seismic data from the Hanford Seismic Network for the U.S. Department of Energy and its contractors. Hanford Seismic Monitoring also locates and identifies sources of seismic activity and monitors changes in the historical pattern of seismic activity at the Hanford Site. The data are compiled, archived, and published for use by the Hanford Site for waste management, Natural Phenomena Hazards assessments, and engineering design and construction. In addition, the seismic monitoring organization works with the Hanford Site Emergency Services Organization to provide assistance in the event of a significant earthquake on the Hanford Site. The Hanford Seismic Network and the Eastern Washington Regional Network consist of 41 individual sensor sites and 15 radio relay sites maintained by the Hanford Seismic Monitoring staff. For the Hanford Seismic Network, there were 1,177 triggers during fiscal year 2002. Of these triggers, 553 were earthquakes. Two earthquakes were located in the Hanford Seismic Network area. Stratigraphically 13 occurred in the Columbia River basalt, 12 were earthquakes in the pre-basalt sediments, and 17 were earthquakes in the crystalline basement. Geographically, 13 earthquakes …

In February 1997, the U.S. Department of Energy, Nevada Operations Office issued the Mitigation Action Plan which addressed potential impacts described in the ''Final Environmental Impact Statement for the Nevada Test Site and Off-Site Locations in the State of Nevada'' (DOE/EIS 0243). The U.S. Department of Energy, Nevada Operations Office committed to several actions, including the preparation of an annual report, which summarizes waste shipments to and from the Nevada Test Site (NTS) Radioactive Waste Management Sites (RWMSs) at Area 3 and Area 5. This document satisfies requirements with regard to low-level radioactive waste (LLW) and mixed low-level radioactive waste (MLLW) transported to or from the NTS during fiscal year (FY) 2002.

None

The purpose of this collaborative Idaho National Engineering and Environmental Laboratory (INEEL) and Massachusetts Institute of Technology (MIT) Laboratory Directed Research and Development (LDRD) project is to investigate the suitability of lead or lead-bismuth cooled fast reactors for producing low-cost electricity as well as for actinide burning. The goal is to identify and analyze the key technical issues in core neutronics, materials, thermal-hydraulics, fuels, and economics associated with the development of this reactor concept. Work has been accomplished in four major areas of research: core neutronic design, plant engineering, material compatibility studies, and coolant activation. The publications derived from work on this project (since project inception) are listed in Appendix A. This is the third in a series of Annual Reports for this project, the others are also listed in Appendix A as FY-00 and FY-01 Annual Reports.

PNNL estimated the FY2002 energy, environmental, and financial benefits (i.e., metrics) of the technologies and practices in the U.S. Department of Energy's (DOE's) Office of Building Technology, State and Community Programs (BTS). BTS uses the estimates of benefits as part of its annual budget request. This report includes an overview of the analytical approaches used to estimate energy savings for the FY2002 appropriated budget for BTS. The report also includes descriptions of key assumptions and the methodology that is used to calculate energy savings estimates for each BTS program.

The FY 2000-2004 Institutional Plan provides an overview of the Ernest Orlando Lawrence Berkeley National Laboratory (Berkeley Lab, the Laboratory) mission, strategic plan, initiatives, and the resources required to fulfill its role in support of national needs in fundamental science and technology, energy resources, and environmental quality. To advance the Department of Energy's ongoing efforts to define the Integrated Laboratory System, the Berkeley Lab Institutional Plan reflects the strategic elements of our planning efforts. The Institutional Plan is a management report that supports the Department of Energy's mission and programs and is an element of the Department of Energy's strategic management planning activities, developed through an annual planning process. The Plan supports the Government Performance and Results Act of 1993 and complements the performance-based contract between the Department of Energy and the Regents of the University of California. It identifies technical and administrative directions in the context of the national energy policy and research needs and the Department of Energy's program planning initiatives. Preparation of the plan is coordinated by the Office of Planning and Communications from information contributed by Berkeley Lab's scientific and support divisions.

Despite recent intensive experimental effort, the electronic structure of Pu, particularly {delta}-Pu, remains ill defined. An evaluation of our previous synchrotron-radiation-based investigation of {alpha}-Pu and {delta}-Pu has lead to a new paradigm for the interpretation of photoemission spectra of U, Np, {alpha}-Pu, {delta}-Pu and Am. This approach is founded upon a model in which spin and spin-orbit splittings are included in the picture of the 5f states and upon the observation of chiral/spin-dependent effects in non-magnetic systems. By extending a quantitative model developed for the interpretation of core level spectroscopy in magnetic systems, it is possible to predict the contributions of the individual component states within the 5-f manifold. This has lead to a remarkable agreement between the results of the model and the previously collected spectra of U, Np, Pu and Am, particularly {delta}-Pu, and to a prediction of what we might expect to see in future spin-resolving experiments.

A series of studies by the Air Force, the National Reconnaissance Office and NASA have identified the critical role played by large optics in fulfilling many of the space related missions of these agencies. Whether it is the Next Generation Space Telescope for NASA, high resolution imaging systems for NRO, or beam weaponry for the Air Force, the diameter of the primary optic is central to achieving high resolution (imaging) or a small spot size on target (lethality). While the detailed requirements differ for each application (high resolution imaging over the visible and near-infrared for earth observation, high damage threshold but single-wavelength operation for directed energy), the challenges of a large, lightweight primary optic which is space compatible and operates with high efficiency are the same. The advantage of such large optics to national surveillance applications is that it permits these observations to be carried-out with much greater effectiveness than with smaller optics. For laser weapons, the advantage is that it permits more tightly focused beams which can be leveraged into either greater effective range, reduced laser power, and/or smaller on-target spot-sizes; weapon systems can be made either much more effective or much less expensive. This application requires only single-wavelength …

The Department of Energy (DOE) and its predecessors have conducted research and development (R&D) in geothermal energy since 1971. To develop the technology needed to harness the Nation's vast geothermal resources, DOE's Office of Geothermal Technologies oversees a network of national laboratories, industrial contractors, universities, and their subcontractors. The goals are: (1) Double the number of States with geothermal electric power facilities to eight by 2006; (2) Reduce the levelized cost of generating geothermal power to 3-5 cents per kWh by 2007; and (3) Supply the electrical power or heat energy needs of 7 million homes and businesses in the United States by 2010. This Federal Geothermal Program Research Update reviews the specific objectives, status, and accomplishments of DOE's Geothermal Program for Federal Fiscal Year (FY) 2002. The information contained in this Research Update illustrates how the mission and goals of the Office of Geothermal Technologies are reflected in each R&D activity. The Geothermal Program, from its guiding principles to the most detailed research activities, is focused on expanding the use of geothermal energy. balanced strategy for the Geothermal Program.

This document is an integrated monitoring plan for the groundwater project and contains: well and constituent lists for monitoring required by the Atomic Energy Act of 1954 and its implementing orders ("surveillance monitoring"); other, established monitoring plans by reference; and a master well/ constituent/frequency matrix for the entire Hanford Site.

Our goal is to develop robust DNA signatures for rapid and specific DNA-based detection platforms that can be employed by CBNP to detect a wide range of potential agents. Our approach has resulted in highly specific DNA signatures for Yersina pestis, Bacillus anthracis and Brucella species. Furthermore, this approach can be applied to any genome (even uncharacterized ones), which facilitates DNA signature development for detection of newly emerging pathogens. We are using suppression subtractive hybridization (SSH) as a tool to define large DNA regions specific to multiple biothreat pathogens by comparing them to genomes of the most closely related organisms. This approach has become increasingly accurate as we continue to find new, distinctive strains and ever-closer near-neighbors. With the huge costs incurred by whole genome sequencing, it is not possible to sequence each new bacterial genome. However, it is completely practical to identify genome differences in the laboratory using SSH, and becomes especially useful when comparing new strains to previously sequenced genomes.

This report summarizes the science and technology research and development efforts in Lawrence Livermore National Laboratory's Engineering Directorate for FY2002, and exemplifies Engineering's 50-year history of developing the technologies needed to support the Laboratory's missions. Engineering has been a partner in every major program and project at the Laboratory throughout its existence and has prepared for this role with a skilled workforce and the technical resources developed through venues like the Laboratory Directed Research and Development Program (LDRD). This accomplishment is well summarized by Engineering's mission: ''To make programs succeed today and to ensure the vitality of the Laboratory tomorrow.'' Engineering's investment in new technologies is carried out through two programs, the ''Tech Base'' program (Volume I) and the LDRD program (Volume II). This report summarizes the LDRD portion of Engineering's Technology Program. LDRD is the vehicle for researching and developing those technologies and competencies that are cutting edge, or that require a significant level of research, or contain some unknown that needs to be fully understood. Tech Base is used to apply those technologies, or adapt them to a Laboratory need. The term commonly used for Tech Base projects is ''reduction to practice.'' Therefore, the LDRD report covered here …

None

This final report details the operations and results of a 3-year Seepline Phytoremediation Project performed adjacent to Tims Branch, which is located in the Southern Sector of the Savannah River Site (SRS) A/M Area. Phytoremediation is a process where interactions between vegetation, associated microorganisms, and the host substrate combine to effectively degrade contaminated soils, sediments, and groundwater. Phytoremediation is a rapidly developing technology that shows promise for the effective and safe cleanup of certain hazardous wastes. It has the potential to remediate numerous volatile organic compounds (VOCs). Extensive characterization work has demonstrated that two VOCs, tetrachloroethylene (PCE) and trichloroethylene (TCE) are the major components of the VOC-contaminated groundwater that is migrating through the Southern Sector and Tims Branch seepline area (WSRC, 1999). The PCE and TCE are chlorinated ethenes (CE), and have been detected in seepline soils and ground water adjacent to the ecologically-sensitive Tims Branch seepline area.

OAK B202 THE GENERAL ATOMICS FUSION THEORY PROGRAM ANNUAL REPORT FOR FISCAL YEAR 2002. The dual objective of the fusion theory program at General Atomics (GA) is to significantly advance the scientific understanding of the physics of fusion plasmas and to support the DIII-D and other tokamak experiments. The program plan is aimed at contributing significantly to the Fusion Energy Science and the Tokamak Concept Improvement goals of the Office of Fusion Energy Sciences (OFES).

Four boreholes were drilled at the Immobilized Low-Activity Waste Disposal Site in April 2002. Three were completed as groundwater monitoring wells. This report documents the results of the drilling and data collected from the drilling.

This report presents the results of groundwater and vadose zone monitoring and remediation for fiscal year 2002 on the U.S. Department of Energy's Hanford Site in Washington State. This report is written to meet the requirements in CERCLA, RCRA, the Atomic Energy Act of 1954, and Washington State Administrative Code.

This report contains the program plan and background information for the Heavy Vehicle Hybrid Propulsion R and D Program sponsored by the Department of Energy's Office of Heavy Vehicle Technologies. The program is a collaboration between industry and government established for the development of advanced hybrid-electric propulsion technology for urban cycle trucks and buses. It targets specific applications to enhance potential market success. Potential end-users are also involved.

In this first institutional plan prepared by Bechtel BWXT Idaho, LLC, for the Idaho National Engineering and Environmental Laboratory, the INEEL will focus its efforts on three strategic thrusts: (1) Environmental Management stewardship for DOE-EM, (2) Nuclear reactor technology for DOE-Nuclear Energy (NE), and (3) Energy R and D, demonstration, and deployment (initial focus on biofuels and chemicals from biomass). The first strategic thrust focuses on meeting DOE-EMs environmental cleanup and long-term stewardship needs in a manner that is safe, cost-effective, science-based, and approved by key stakeholders. The science base at the INEEL will be further used to address a grand challenge for the INEEL and the DOE complex--the development of a fundamental scientific understanding of the migration of subsurface contaminants. The second strategic thrust is directed at DOE-NEs needs for safe, economical, waste-minimized, and proliferation-resistant nuclear technologies. As NE lead laboratories, the INEEL and ANL will pursue specific priorities. The third strategic thrust focuses on DOE's needs for clean, efficient, and renewable energy technology. As an initial effort, the INEEL will enhance its capability in biofuels, bioprocessing, and biochemicals. The content of this institutional plan is designed to meet basic DOE requirements for content and structure and reflect the …

In this first Institutional Plan prepared by Bechtel BWXT Idaho, LLC, for the Idaho National Engineering and Environmental Laboratory, the INEEL will focus it's efforts on three strategic thrusts; (1) Environmental Management stewardship for DOE-EM, (2) Nuclear reactor technology for DOE-Nuclear Energy (NE), and (3) Energy R&D, demonstration, and deployment (initial focus on biofuels and chemical from biomass). The first strategic thrust focuses on meeting DOE-EM's environmental cleanup and long-term stewardship needs in a manner that is safe, cost-effective, science-based, and approved by key stakeholders. The science base at the INEEL will be further used to address a grand challenge for the INEEL and the DOE complex - the development of a fundamental scientific understanding of the migration of subsurface contaminants. The second strategic thrust is directed at DOE-NE's needs for safe, economical, waste-minimized, and proliferation-resistant nuclear technologies. As NE lead laboratories, the INEEL and ANL will pursue specific priorities. The third strategic thrust focuses on DOE's needs for clean, efficient, and renewable energy technology. As an initial effort, the INEEL will enhance its capability in biofuels, bioprocessing, and biochemicals. The content of this Institutional Plan is designed to meet basic DOE requirements for content and structure and reflect the …

This Institutional Plan describes what Argonne management regards as the optimal future development of Laboratory activities. The document outlines the development of both research programs and support operations in the context of the nation's R and D priorities, the missions of the Department of Energy (DOE) and Argonne, and expected resource constraints. The product of many discussions between DOE and Argonne program managers, the Draft Institutional Plan is provided to the Department before Argonne's On-Site Review. Issuance of the final Institutional Plan in the fall, after further comment and discussion, marks the culmination of the Laboratory's annual planning cycle. The final Plan also reflects programmatic priorities developed during Argonne's summer strategic planning process and the allocation of Laboratory Directed Research and Development funds.

This report describes the activities on the ''Ultra Miniaturization of RF'' project conducted as part of Sandia's Laboratory Directed Research and Development (LDRD) program. The objective was to evaluate a multichip module technology known as Microwave Chip on Flex (MCOF) [1], which is a newer form of the standard high density interconnect (HDI) technology originally developed by General Electric and Lockheed Martin [2,3]. The program was a three-year effort. In the first year, the team focused on understanding the technology and developing a basic design library. In the second year, devices and interconnects used at L, X, and Ku frequency bands were evaluated via a test coupon (with no application specific circuit design). In the third year, we designed, fabricated, and evaluated a specific Ku-band circuit. The circuit design and layout was performed by Sandia, and the module fabrication was performed by Lockheed Martin Government Electronic Systems. In MCOF technology [1], bare die are placed face down on an adhesive backed flex circuit. The first level of the circuit is a pre-patterned titanium copper thin film metal system on a polyimide dielectric material. The complete module is then framed and filled with an epoxy encapsulant. The module is flipped and …

This report describes the development of an ultra-low power spread spectrum receiver based on a programmable surface acoustic wave (SAW) correlator. This work was funded under LDRD 02-26573, Ultra-Low Power Spread Spectrum Receiver. The approach taken in this project uses direct demodulation of a radio frequency (RF) signal from carrier frequency to data frequency. This approach was taken to reduce power consumption and size. The design is based on the technique of correlating the received RF signal with the preprogrammed spreading code. The system requirements, applications, design methodology, and testing results are all documented in the following pages.

A study performed in FY01 recommended that the Defense Waste Process Facility (DWPF) replace Frit 200 with Frit 320 for the processing of sludge batch 2 (SB2) to improve melt rate (Lambent et al., 2001) contingent upon additional testing which included slurry feeding. The FY02 melt rate program was developed to support this recommendation as well as to investigate alternative methods of improving melt rate above and beyond a change in frit composition. The integrated program was primarily based on a sound testing methodology from which the frit change was recommended. In addition, the program included the development of additional tools to provide further insight into melt rate enhancements. The overall strategy of the FY02 testing program was to design suites of melt rate tests based on recommendations from previous work that provided insight into other methods of improving melt rate for the DWPF. The objectives of the FY02 testing program included how melt rate might be influenced by increases in waste loading, differences in frit particle size, the use of batch chemicals rather than a pre-fabricated frit, and the impact of uranium. This report summarizes the equipment development and setup, procedures, and results of this testing, and includes recommendations …