Sampling was conducted in John Day Reservoir to collect walleye, northern squawfish and smallmouth bass. Changes in distributions during sampling were characterized from changes in catch per unit effort (CPUE) in sampling areas. Observed movements of marked and radiotagged fish were examined and used to define discrete populations. Abundances were estimated using a modified Schnabel multiple mark and recapture estimator. Abundance estimates were corrected for angler harvest, size specific vulnerability to gear, recruitment due to growth and tag loss during sampling. Age composition of catch was determined to characterize relative contributions of various year classes to the populations. Ages at which fish were fully recruited to gear were defined by catch curves. Survival of fully recruited year classes was calculated from differences in CPUE's between 1984 and 1985. Mean length at age was estimated and used to determine age specific incremental growth. Eighty-eight percent of walleye were caught in McNary tailrace or Irrigon-Paterson, whereas 95% of smallmouth bass were caught from Irrigon-Paterson to the John Day forebay. Abundances of walleye and northern squawfish with fork lengths greater than 250 mm and smallmouth bass with fork lengths greater than 200 mm were estimated to be 16,219, 95,407, and 11,259. Anglers harvested …

Second regions of stability to the ideal ballooning modes have been shown to exist in large-aspect-ratio circular and small-aspect-ratio bean-shaped tokamaks. We report on the existence of these second stability regions in finite-aspect-ratio dee-shaped tokamaks. We also report on the discovery of a second-stable region with respect to the n = 1 external kink mode in a bean-shaped plasma. The role of the shear and current profile in determining these regions of parameter space are discussed. 13 refs., 6 figs.

Advanced commercial tokamak studies were performed by the Fusion Engineering Design Center (FEDC) as a participant in the Tokamak Power Systems Studies (TPSS) project coordinated by the Office of Fusion Energy. The FEDC studies addressed the issues of tokamak reactor cost, size, and complexity. A scoping study model was developed to determine the effect of beta on tokamak economics, and it was found that a competitive cost of electricity could be achieved at a beta of 10 to 15%. The implications of operating at a beta of up to 25% were also addressed. It was found that the economics of fusion, like those of fission, improve as unit size increases. However, small units were found to be competitive as elements of a multiplex plant, provided that unit cost and maintenance time reductions are realized for the small units. The modular tokamak configuration combined several new approaches to develop a less complex and lower cost reactor. The modular design combines the toroidal field coil with the reactor structure, locates the primary vacuum boundary at the reactor cell wall, and uses a vertical assembly and maintenance approach. 12 refs., 19 figs.

During the first quarter, the UCLA members of the ALT-II team worked primarily on the development of the experimental program plan and the diagnostics selection, and on the data acquisition system. These programs are discussed in this report.

The three-dimensional diagnostic wind field model (MATHEW) and the particle-in-cell transport and diffusion model (ADPIC) are used by the Atmospheric Release Advisory Capability (ARAC) for real-time assessments of the consequences from accidental releases of radioactivity into the atmosphere. For the dispersion of hazardous heavier-than-air gases, a time-dependent, three-dimensional finite element model (FEM3) is used. These models have been evaluated extensively against a wide spectrum of field experiments involving the release of chemically inert tracers or heavier-than-air gases. The results reveal that the MATHEW/ADPIC models are capable of simulating the spatial and temporal distributions of tracer concentration to within a factor of 2 for 50% of the measured tracer concentrations for near surface releases in relatively flat terrain and within a factor of 2 for 20% of the comparisons for elevated releases in complex terrain. The FEM3 model produces quite satisfactory simulations of the spatial and temporal distributions of heavier-than-air gases, typically within a kilometer of the release point. The ARAC consists of a centralized computerized emergency response system that is capable of supporting up to 100 sites and providing real-time predictions of the consequence of transportation accidents that may occur anywhere. It utilizes pertinent accident information, local and regional meteorology, …

The population balance methodology is described and applied to the transport and capture of polydispersed colloids in packed columns. The transient model includes particle growth, capture, convective transport, and dispersion. We also follow the dynamic accumulation of captured colloids on the solids. The multidimensional parabolic partial differential equation was solved by a recently enhanced method of characteristics technique. This computational technique minimized numerical dispersion and is computationally very fast. The FORTRAN 77 code ran on a VAX-780 in less than a minute and also runs on an IBM-AT using the Professional FORTRAN compiler. The code was extensively tested against various simplified cases and against analytical models. The packed column experiments by Saltelli et al. were re-analyzed incorporating the experimentally reported size distribution of the colloid feed material. Colloid capture was modeled using a linear size dependent filtration function. The effects of a colloid size dependent filtration factor and various initial colloid size distributions on colloid migration and capture were investigated. Also, we followed the changing colloid size distribution as a function of position in the column. Some simple arguments are made to assess the likelihood of colloid migration at a potential NTS Yucca Mountain waste disposal site. 10 refs., 3 …

The Nevada Nuclear Waste Storage Investigations Project of the US Department of Energy provides that agency with data for evaluating volcanic tuff beneath Yucca Mountain, Nevada, to determine its suitability for a potential repository of high-level radioactive waste. Thickness of the unsaturated zone, which consists of fractured, welded and nonwelded tuff, is about 1640 to 2460 feet (500 to 750 meters). One question to be resolved is an estimate of minimum ground-water traveltime from the disturbed zone of the potentail repository to the accessible environment. Another issue is the potential for diffusive or convective gaseous transport of radionuclides from an underground facility in the unsaturated zone to the accessible environment. Gas samples were collected at intervals to a depth of 1200 feet from the unsaturated zone at Yucca Mountain, Nevada. Samples were analyzed for major atmospheric gases; carbon dioxide in the samples was analyzed for carbon-14 activity and for {delta}2!{sup 3}C; water vapor in the samples was analyzed for deuterium and oxygen-18. These data could provide insight into the nature of unsaturated zone transport processes. 15 refs., 4 figs., 4 tabs.

The Analytical Chemistry Laboratory is a full-cost-recovery service center, with the primary mission of providing a broad range of technical support services to the scientific and engineering programs at ANL. In addition, ACL conducts a research program in analytical chemistry, works on instrumental and methods development, and provides analytical services for governmental, educational, and industrial organizations. The ACL handles a wide range of analytical problems, from routine standard analyses to unique problems that require significant development of methods and techniques. The purpose of this report is to summarize the technical and administrative activities of the Analytical Chemistry Laboratory (ACL) at Argonne National Laboratory (ANL) for Fiscal Year 1985 (October 1984 through September 1985). This is the second annual report for the ACL. 4 figs., 1 tab.

Savannah River Plant (SRP) Waste Management Technology Department retained Woodward-Clyde Consultants to oversee collection and analysis of soil core samples and to develop closure plans for the F- and H-Area seepage basins. Waste Management Technology requested the SRL Environmental Sciences Division to provide database management and quality assurance of analytical data from the F- and H-Area seepage basin soil cores. The establishment of a computerized database and data reporting in table and graph forms were incorporated into the database management program. A database of analytical results for radionuclides, cations, and anions was constructed on an IBM 3081 mainframe computer. Two subcontractors were chosen to perform the laboratory analyses of the soil cores. This document provides a discussion of the database management and the soil sampling and analysis studies.

In view of the recent shift in emphasis of the DOE/Industry HTGR development efforts to smaller modular designs it became necessary to review the modelling needs and the codes available to assess the safety performance of these new designs. This report provides a final assessment of the most urgent modelling needs, comparing these to the tools available, and outlining the most significant areas where further modelling is required. Plans to implement the required work are presented. 47 refs., 20 figs.

Investigations of barometric pressure testing of NTS nuclear chimneys were reviewed. This review includes the models used in the interpretation, methods of analysis, and results. Analytic and semi-analytic models were presented and applied to both historical data and new data taken for this current project. An interpretation technique based on non-linear least squares methods was used to analyze this data in terms of historic and more recent chimney models. Finally, a detailed discussion of radioactive gas transport due to surface barometric pressure fluctuations was presented. This mechanism of transport, referred to as ''barometric pumping,'' is presented in terms of conditions likely to be encountered at the NTS. The report concludes with a discussion of the current understanding of gas flow properties in the alluvial and volcanic areas of the NTS, and suggestions for future efforts directed toward increasing this understanding are presented.

A survey is given of topological-bootstrap-theory aspects that connect objective reality, the S matrix and elementary particles. 3 refs., 9 figs.

The use of drilling and coring methods that minimize the disturbance of formation rock and core has permitted field calibration of neutron-moisture tools in relatively large diameter cased and uncased boreholes at Yucca Mountain, Nevada. For 5.5-inch diameter cased holes, there was reasonable agreement between a field calibration in alluvium-colluvium and a laboratory calibration in a chamber containing silica sand. There was little difference between moisture-content profiles obtained in a neutron-access hole with a hand-held neutron-moisture meter and an automated borehole-logging tool using laboratory-generated calibration curves. Field calibrations utilizing linear regression analyses and as many as 119 data pairs show a good correlation between neutron-moisture counts and volumetric water content for sections of uncased 6-inch diameter boreholes in nonwelded and bedded tuff. Regression coefficients ranged from 0.80 to 0.94. There were only small differences between calibration curves in 4.25- and 6-inch uncased sections of boreholes. Results of analyzing field calibration data to determine the effects of formation density on calibration curves were inconclusive. Further experimental and theoretical work is outlined.

One method of adding capacity is to install another array of turbines whose hub height is above the existing array. This report estimates the wake interference that could be expected in a two-level array. Interference is estimated for a typical situation that may be encountered by a wind farm developer. A modified Lissaman array model is used to make the wake interference calculations. The model calculations show that the wake interference between the two levels is small for the turbine characteristics and turbine layouts considered. (The windwise spacings are about 5.4 and 10.8D for the lower and upper levels of turbines, respectively.) Power losses are about 5% or less at rated speed. Thus, two-level arrays may be a viable way of increasing the generating capacity of existing wind farms.

An evaporator will be used in the F/H Effluent Treatment Facility (F/H ETF) to reduce the volume of effluent dispensed to Upper Three Runs Creek and to concentrate solutions from three sources in the F/H ETF before sending that waste to Saltstone. The evaporator will be fed by backwash from the filters in the filtration unit, the concentrate stream from reverse osmosis, and the solutions used in regeneration of ion exchange columns. These streams will contain small amounts of Hg, NH{sub 3}, and Cs-137. Data is readily available concerning the entrainment of these chemicals in evaporator overheads during an evaporation process. No data has yet been generated to predict their behavior due exclusively to their volatility, however. This document describes calculations that have been made concerning the volatility of Hg, NH{sub 3}, and Cs-137 compounds in the F/H ETF evaporator based on expected concentrations, temperatures, and flow rates in that facility.

The objective of this program is the development of effective approaches for delivering radiation therapy to patients with cancer using radiopharmaceuticals produced from monoclonal antibodies. One major achievement of this program has been the development of a new, Cu-67 chelator (Teta). This chelator firmly holds copper even in the presence of competitive serum proteins. Copper has proven to be labile with other chelators. Also, a single photon emission tomographic camera was purchased with University and philanthropic funds specifically for this program. This allows full-time developmental work on quantitative imaging approaches and in vivo kinetics of our various radiopharmaceutical antibody products. The pharmakinetics of I-123 antibody and antibody fragments have been obtained in patients utilizing quantitative imaging and have demonstrated significant differences as well as the need for long- term studies with I-131 and Cu-67.

The objective of this program is to determine how retorting process parameters affect the partitioning of Hg, As, Se, and Cd from raw oil shale to spent shale, shale oil, retort water, and offgas. For each of the elements, the objective of this study is to (1) determine the distribution coefficients for each product stream; (2) identify the chemical forms in water, gas, and oil streams, with particular emphasis on inorganic or organometallic species known to be or suspected of being carcinogenic, toxic, or otherwise harmful; (3) investigate the mechanism(s) responsible for mobilization into each product stream for toxic or labile chemical forms identified in item 2 are mobilized into each product stream; and (4) the effect of retorting rate, maximum retorting temperature, and retorting atmosphere on items 1 and 3. A Green River shale from Colorado and a New Albany shale from Kentucky were heated at 1 to 2/sup 0/C/min and at 10/sup 0/C/min to maximum temperatures of 500 and 750/sup 0/C under a nitrogen sweep gas. The product streams were analyzed using a variety of methods including Zeeman atomic absorption spectroscopy, microwave-induced helium plasma spectroscopy, x-ray fluorescence, instrumental neutron activation analysis, high-pressure liquid and silica gel column chromatography, …

The compositions of clinoptilolites and their host tuffs have been examined by electron microprobe and x-ray fluorescence, respectively, to determine their variability at a potential nuclear waste repository, Yucca Mountain, Nevada. Because of their sorptive properties, these zeolites could provide important geologic barriers to radionuclide migration. Variations in clinoptilolite composition can strongly affect the mineral`s thermal and ion-exchange properties, thus influencing its behavior in the repository environment. Clinoptilolites and heulandites closest to the proposed repository have calcium-rich compositions (60 to 90 mol. % Ca) and silica-to-aluminum ratios that concentrate between 4.0 and 4.6. In contrast, clinoptilolites and their host tuffs deeper in the volcanic sequence have highly variable compositions that vary vertically and laterally. Deeper-occurring clinoptilolites in the eastern part of Yucca Mountain are characterized by calcic-potassic compositions and tend to become more calcium-rich with depth. Clinoptilolites at equivalent stratigraphic levels on the western side of Yucca Mountain have sodic-potassic compositions and tend to become more sodium-rich with depth. Despite their differences in exchangeable cation compositions these two deeper-occurring compositional suites have similar silica-to-aluminum ratios, concentrating between 4.4 and 5.0. The chemical variability of clinoptilolites and their host tuffs at Yucca Mountain suggest that their physical and chemical properties will …

Research needs on the climate consequences of nuclear war were discussed. These include: (1) a better definition of the emissions from massive urban fires; (2) the exploration of prescribed forest burns; (3) the dirty cloud problem; (4) microphysical studies of soot; and (5) simulation of the second summer season after nuclear war. (ACR)

Research on Columbia River white sturgeon has been directed at their early life history as it may apply to production and enhancement strategies for management of the species. The river environment in which sturgeon historically migrated, spawned, and reared has changed through development. Habitat changes are expected to precipitate genetic changes in the fish, as well as reduce the fitness in populations. Genetic analysis of samples taken from various locations over the length of the Columbia River have indicated that observed gene frequencies in all areas sampled were not in Hardy-Weinburg equilibrium, which could suggest that the general population is experiencing perturbation in the system. Analysis thus far has exposed few differences between samples from the lower, middle, and upper portions of the system. Allelic differences were identified in fish from the Roosevelt Lake, which may be evidence of unique characteristics among fish from that general area.

The development of numerical models for plasma phenomena and magnetic confinement devices is discussed. The multidimensional Fokker-Planck and transport codes are applied to toroidal mirror and compact toroid devices. Linear and nonlinear resistive magnetohydrodynamics in two and three dimensions are used in the investigation of various fusion devices. 362 refs., 4 tabs. (WRF)

This report describes a comprehensive computer program that allows the user to simulate the performance of realistic coal preparation plants. Use of the simulator requires that the user specify the appearance of the plant configuration, the plant operating conditions, and a description of the coal feed. The simulator will then determine the flowrates within the plant, and a description of each flowrate (i.e., the weight distribution, percent ash, pyritic sulfur and total sulfur, moisture, and Btu content). The simulation program has been written in modular form using the Fortran language. It can be implemented on a great many different types of computers, ranging from large scientific mainframes to IBM-type personal computers with a fixed disk. Part I of this report contains a general description of the methods used to carry out the simulation. Each of the major types of units is described separately, in addition to a description of the overall system analysis. Part II is intended as a user's manual. It contains a listing of the mainframe version of the program, instructions for its use (on both a mainframe and a microcomputer), and output for a representative sample problem. 22 refs., 9 figs., 1 tab.

This report describes a comprehensive computer program that allows the user to simulate the performance of realistic coal preparation plants. The program is very flexible in the sense that it can accommodate any particular plant configuration that may be of interest. This allows the user to compare the performance of different plant configurations and to determine the impact of various modes of operation with the same configuration. In addition, the program can be used to assess the degree of cleaning obtained with different coal feeds for a given plant configuration and a given mode of operation. Use of the simulator requires that the user specify the appearance of the plant configuration, the plant operating conditions, and a description of the coal feed. The simulator will then determine the flowrates within the plant, and a description of each flowrate (i.e., the weight distribution, percent ash, pyritic sulfur and total sulfur, moisture, and Btu content). The simulation program has been written in modular form using the Fortran language. It can be implemented on a great many different types of computers, ranging from large scientific mainframes to IBM-type personal computers with a fixed disk. Some customization may be required, however, to ensure compatibility …

This report concerns problems involved in recondensing first-wall materials vaporized by x rays and pellet debris in the Cascade inertial confinement fusion reactor. It examines three proposed first-wall materials, beryllium oxide (BeO), silicon carbide (SiO), and pyrolytic graphite (C), paying particular attention to the chemical equilibrium and kinetics of the vaporized gases. The major results of this study are as follows. Ceramic materials composed of diatomic molecules, such as BeO and SiC, exist as highly dissociated species after vaporization. The low gas density precludes significant recombination during times of interest (i.e., less than 0.1 s). The dissociated species (Be, O, Si, and C) are, except for carbon, quite volatile and are thermodynamically stable as a vapor under the high temperature and low density found in Cascade. These materials are thus unsuitable as first-wall materials. This difficulty is avoided with pyrolytic graphite. Since the condensation coefficient of monatomic carbon vapor (approx. 0.5) is greater than that of the polyatomic vapor (<0.1), recondensation is assisted by the expected high degree of dissociation. The proposed 10-layer granular carbon bed is sufficient to condense all the carbon vapor before it penetrates to the BeO layer below. The effective condensation coefficient of the porous bed …