An overall population weighted atmospheric dispersion coefficient (X/Q) has been calculated for the public within 10 miles of the Hanford Site boundary. The Columbia river was assumed as the Hanford site boundary to the north and the east. The GXQ code was used for the calculation. The value calculated is 1.88 x 10-8 s/m 3.

The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The Illness and Injury Surveillance Program monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

The vector potential and the magnetic field have been derived for an arrays of quadrupole magnets with thin Cos(2{theta}) current sheet placed at r = R.{sup bc}. The field strength of each coil within the array, varies purely as a Fourier sinusoidal series of the longidutinal coordinate z in proportion to {omega}{sub m}z, where {omega}{sub m} = (2m-1){pi}/L, L denotes the half-period, and m = 1,2,3 etc. The analysis is based on the expansion of the vector potential in the region external to the windings of a linear 3D quad, and a revision of that expansion by the application of the 'Addition Theorem' from that around the coil center to that around any arbitrary point in space.

In today's world, the use of parallel programming and architectures is essential for simulating practical problems in engineering and related disciplines. Remarkable progress in CPU architecture (multi- and many-core, SMT, transactional memory, virtualization support, etc.), system scalability, and interconnect technology continues to provide new opportunities, as well as new challenges for both system architects and software developers. These trends are paralleled by progress in parallel algorithms, simulation techniques, and software integration from multiple disciplines. In its 6th year ParSim continues to build a bridge between computer science and the application disciplines and to help with fostering cooperations between the different fields. In contrast to traditional conferences, emphasis is put on the presentation of up-to-date results with a shorter turn-around time. This offers the unique opportunity to present new aspects in this dynamic field and discuss them with a wide, interdisciplinary audience. The EuroPVM/MPI conference series, as one of the prime events in parallel computation, serves as an ideal surrounding for ParSim. This combination enables the participants to present and discuss their work within the scope of both the session and the host conference. This year, ten papers with authors in ten countries were submitted to ParSim, and after a quick …

Direct energy converters for use on controlled fusion reactors utilize electrodes operated at elevated voltages and temperatures. The insulating elements that position these electrodes must support large voltages and under some circumstances large thermal gradients. It is shown that even modest thermal gradients can cause major alterations of the electric-field distribution within the insulating element.

Airborne temperature surveys were used to depict the small surface temperature differences related to heat flow anomalies. Zones with conductive heat flow differences of 45 +- 16 ..mu..cal/cm/sup 2/(s) had predawn surface temperature differences of 1.4 +- 0.3/sup 0/C. Airborne temperature surveys were coordinated with field temperature surveys at Long Valley, California, the site of a known geothermal resource area. The airborne temperature surveys recorded redundant, predawn temperatures at two wavelengths and at two elevations. Overall temperature corrections were determined by calibrating dry soil surface temperatures with thermistor probes. The probes measured air and soil temperatures within 2 cm of the surface, every twenty minutes, during the survey overflights.

The toroidal Alfvén eigenmodes (TAE) in the Tokamak Fusion Test Reactor [K. Young, et al., Plasma Phys. Controlled Fusion 26, 11 (1984)]deuterium-tritium plasmas are analyzed using the NOVA-K code [C.Z. Cheng, Phys. Reports 211, 1 (1992)]. The theoretical results are compared with the experimental measurements in detail. In most cases, the theory agrees with the observations in terms of mode frequency, mode structure, and mode stability. However, one mode with toroidal mode number n = 2 is observed to be poloidally localized on the high field side of the magnetic axis with a mode frequency substantially below the TAE frequency.

This paper presents a summary of design and testing of material and composites for use in radioactive material packages. These materials provide thermal protection and provide structural integrity and energy absorption to the package during normal and hypothetical accident condition events as required by Title 10 Part 71 of the Code of Federal Regulations. Testing of packages comprising these materials is summarized.

This document analyzes data on the lifetime of the 201-MHz triode power amplifier (PA) vacuum tube, model number 7835, used in the low-energy half of the Linac. We observe that a 7835 power amplifier vacuum tube has historically provided about one and one-third years service in the Linac. The lifetime of recently re-manufactured tubes is somewhat less, but it is not clear if this is because the manufacturer is ''loosing their touch,'' or because tubes cannot be effectively rebuilt after a certain number of times. Taking into account the expected tube lifetimes, the statistical fluctuations on this number, and the amount of time it takes for the manufacturer to make good tubes, we require about 14 tubes either operating, ready as good spares or being manufactured, in order to have sufficient spares to run the Linac. As a hedge against supplier drop out, we need to increase our inventory of good spare tubes by about three tubes per year for the next few years.

A descriptive calculation from the Analysis of the Decapole Systematic Error in the Dipoles and of the Correctors

Amorphous metal and ceramic thermal spray coatings have been developed that can be used to enhance the corrosion resistance of containers for the transportation, aging and disposal of spent nuclear fuel and high-level radioactive wastes. Iron-based amorphous metal formulations with chromium, molybdenum and tungsten have shown the corrosion resistance believed to be necessary for such applications. Rare earth additions enable very low critical cooling rates to be achieved. The boron content of these materials, and their stability at high neutron doses, enable them to serve as high efficiency neutron absorbers for criticality control. Ceramic coatings may provide even greater corrosion resistance for container applications, though the boron-containing amorphous metals are still favored for criticality control applications. These amorphous metal and ceramic materials have been produced as gas atomized powders and applied as near full density, non-porous coatings with the high-velocity oxy-fuel process. This paper summarizes the performance of these coatings as corrosion-resistant barriers, and as neutron absorbers. Relevant corrosion models are also discussed, as well as a cost model to quantify the economic benefits possible with these new materials.

Pacific Northwest National Laboratory (PNNL) established an area monitoring dosimeter program in accordance with Article 514 of the Department of Energy (DOE) Radiological Control Manual (RCM) in January 1993. This program is to minimize the number of areas requiring issuance of personnel dosimeters and to demonstrate that doses outside Radiological Buffer Areas are negligible. In accordance with 10 CFR Part 835.402 (a)(1)-(4) and Article 511.1 of the PNNL Radiological Control Program Description, personnel dosimetry shall be provided to (1) radiological workers who are likely to receive at least 100 mrem annually, and (2) declared pregnant workers, minors, and members of the public who are likely to receive at least 50 mrem annually. Program results for calendar years 1993-2002 confirm that personnel dosimetry is not needed for individuals located in areas monitored by the program.

The Defense Waste Processing Facility (DWPF) is currently processing Sludge Batch 2 (SB2) and plans to initiate processing of SB3 in the spring of 2004. In addition, the Savannah River High Level Waste Division proposes to transfer existing excess Pu and Am/Cm materials through the Liquid Radioactive Waste Handling Facility directly to the Extended Sludge Process Facility. Current blending strategies have both the Pu and Am/Cm materials being vitrified within SB3 in the DWPF.

Individual raw datastreams from instrumentation at the Atmospheric Radiation Measurement (ARM) Climate Research Facility fixed and mobile sites are collected and sent to the Data Management Facility (DMF) at Pacific Northwest National Laboratory (PNNL) for processing in near real-time. Raw and processed data are then sent approximately daily to the ARM Archive, where they are made available to users. For each instrument, we calculate the ratio of the actual number of data records received daily at the Archive to the expected number of data records. The results are tabulated by (1) individual datastream, site, and month for the current year and (2) site and fiscal year (FY) dating back to 1998.

None

We have studied numerically the evolution and decay of axion strings. These global defects decay mainly by axion emission and thus contribute to the cosmological axion energy density. The relative importance of this source relative to misalignment production of axions depends on the spectrum. Radiation spectra for various string loop configurations are presented. They support the contention that the string decay contribution is of the same order of magnitude as the contribution from misalignment.

The ITER in-vessel coil system includes Vertical Stability (VS) coils and Edge Localized Mode (ELM) coils. There are two large VS ring coils, one upper and one lower. Each has four turns which are independently connected. The VS coils are needed for successful operation of ITER for most all of its operating modes. The VS coils must be highly reliable and fault tolerant. The operating environment includes normal and disruption Lorentz forces. To parametrically address all these design conditions in a tractable analysis requires a simplified model. The VS coils are predominately axisymmetric, and this suggests that an axisymmetric model can be meaningfully used to address the variations in mechanical design, loading, material properties, and time dependency. The axisymmetric finite element analysis described in this paper includes simulations of the bolted frictional connections used for the mounting details. Radiation and elastic-plastic response are modeled particularly for the extreme faulted conditions. Thermal connectivity is varied to study the effects of partial thermal connection of the actively cooled conductor to the remaining structure.

CERES is a dilepton experiment at the CERN SPS, known for its observation of enhanced production of low mass efe- pairs in collisions between heavy nuclei [1]. The upgrade of CERES in 1997-1998 by a radial Time Projection Chamber (TPC) [2] allowed to improve the momentum resolution and the particle identification capability while retaining the cylindrical symmetry. The upgraded experiment is shown in Fig. 1. The upgrade also extended the sensitivity of CERES to hadrons and made possible results like those described below. The measurement of central Pb+Au collisions at the maximum SPS energy of 158 GeV per nucleon in the fall of 2000 was the first run of the fully upgraded CERES and at the same time the last run of this experiment. About 30 million Pb+Au collision events at 158 GeV per nucleon were collected, most of them with centrality within the top 7% of the geometrical cross section {sigma}{sub G} = 6.94 b. Small samples of the 20% and the minimum bias collisions, as well as a short run at 80 AGeV, were recorded in addition. The dilepton mass spectra from this experiment were published in [3]. In this talk I present two particular results of hadron …

A novel method for beam manipulation, compression, and stacking using a broad band RF system in circular accelerators is described. The method uses a series of linear voltage ramps in combination with moving barrier pulses to azimuthally compress, expand, or cog the beam. Beam manipulations can be accomplished rapidly and, in principle, without emittance growth. The general principle of the method is discussed using beam dynamics simulations. Beam experiments in the Fermilab Recycler Ring convincingly validate the concept. Preliminary experiments in the Fermilab Main Injector to investigate its potential for merging two ''booster batches'' to produce high intensity proton beams for neutrino and antiproton production are described.

Repeating earthquakes (REs) are sequences of events that have nearly identical waveforms and are interpreted to represent fault asperities driven to failure by loading from aseismic creep on the surrounding fault surface at depth. We investigate the occurrence of these REs along faults in central California to determine which faults exhibit creep and the spatio-temporal distribution of this creep. At the juncture of the San Andreas and southern Calaveras-Paicines faults, both faults as well as a smaller secondary fault, the Quien Sabe fault, are observed to produce REs over the observation period of March 1984-May 2005. REs in this area reflect a heterogeneous creep distribution along the fault plane with significant variations in time. Cumulative slip over the observation period at individual sequence locations is determined to range from 5.5-58.2 cm on the San Andreas fault, 4.8-14.1 cm on the southern Calaveras-Paicines fault, and 4.9-24.8 cm on the Quien Sabe fault. Creep at depth appears to mimic the behaviors seen of creep on the surface in that evidence of steady slip, triggered slip, and episodic slip phenomena are also observed in the RE sequences. For comparison, we investigate the occurrence of REs west of the San Andreas fault within the …

The objective of this contract is to extend and optimize UOP's single-stage slurry-catalyzed co-processing scheme. Particular emphasis is given to defining and improving Mo catalyst utilization and cost, evaluating alternative and disposable slurry-catalyst systems, and improving catalyst recycle and recovery techniques. During the previous quarter, a catalyst concentration study was completed. The study showed that the highest nondistillable conversions and liquid yields were achieved using liquid recycle at temperatures in the range of 450--460{degree}C. At these high severity conditions, the liquid product yield and light ends yield were nearly independent of catalyst concentration. During the current quarter a follow-up study was conducted without catalyst. The objective of this study was to determine whether the improved high temperature operability was due to improved hydrodynamics resulting from the use of liquid recycle or whether catalyst, also plays a role, even at small concentrations. The results of bench-scale Run 28 are discussed in this report. 1 ref., 12 figs.

Transmission Electron Microscopy developed from an imagingtool into a quantitative electron beam characterization tool that locallyaccesses structure, chemistry, and bonding in materials with sub Angstromresolution. Experiments utilize coherently and incoherently scatteredelectrons. In this contribution, the interface between gallium nitrideand sapphire as well as thin silicon gate oxides are studied tounderstand underlying physical processes and the strength of thedifferent microscopy techniques. An investigation of the GaN/sapphireinterface benefits largely from the application of phase contrastmicroscopy that makes it possible to visualize dislocation corestructures and single columns of oxygen and nitrogen at a closest spacingof 85 pm. In contrast, it is adequate to investigate Si/SiOxNy/poly-Siinterfaces with incoherently scattered electrons and electronspectroscopy because amorphous and poly crystalline materials areinvolved. Here, it is demonstrated that the SiOxNy/poly-Si interface isrougher than the Si/SiOx interface, that desirable nitrogen diffusiongradients can be introduced into the gate oxide, and that a nitridationcoupled with annealing increases its physical width while reducing theequivalent electrical oxide thickness to values approaching 1.2 nm.Therefore, an amorphous SiNxOy gate dielectric seems to be a suitablesubstitute for traditional gate oxides to further increase device speedby reducing dimensions in Si technology.

The muon collider captures pions using solenoidal fields. The pion are converted to muons as they are bunched in an RF phase rotation system. Solenoids are used to focus the muons as their emitance is reduced during cooling. Bent solenoids are used to sort muons by momentum. This report describes a bent solenoid system that is part of a proposed muon cooling experiment. The superconducting solenoid described in this report consists of a straight solenoid that is 1.8 m long, a bent solenoid that is 1.0 m to 1.3 m long and a second straight solenoid that is 2.6 m long. The bent solenoid bends the muons over an angle of 57.3 degrees (1 radian). The bent solenoid has a minor coil radius (to the center of the coil) that is 0.24 m and a major radius (of the solenoid axis) of 1.0 m. The central induction along the axis is 3.0 T There is a dipole that generates an induction of 0.51 T, perpendicular to the plane of the bend, when the induction on the bent solenoid axis is 3.0 T.

An O-CDMA TD based on 2-D (wavelength/time) codes is described, with bit-error-rate (BER) and eye-diagram measurements given for eight users. Simulations indicate that the TD can support 32 asynchronous users.