The system plans, construction, integration and test, and performance evaluation are discussed for the photovoltaic power supply at the Newman Power Station in El Paso, Texas. The system consists of 64 parallel-connected panels, each panel containing nine series-connected photovoltaic modules. The system is connected, through power monitoring equipment, to an existing DC bus that supplies uninterruptible power to a computer that controls the power generating equipment. The site is described and possible environmental hazards are assessed. Site preparation and the installation of the photovoltaic panels, electrical cabling, and instrumentation subsystems are described. System testing includes initial system checkout, module performance test, control system test. A training program for operators and maintenance personnel is briefly described, including visual aids. Performance data collection and analysis are described, and actual data are compared with a computer simulation. System drawings are included. (LEW)

One uranium anomaly meets the minimum statistical requirements as defined. This anomaly is over the potassium (%K) contact area between undifferentiated Tertiary rocks and Pleistocene glacial deposits. Equivalent uranium (ppM eU), equivalent thorium (ppM eT), eU/eT, eU/eK, eT,K, and magnetic pseudo-contour maps are presented in Appendix E. Stacked profiles showing geologic strip maps along each flight-line, together with sensor data, and ancillary data are presented in Appendix F. All maps and profiles were prepared on a scale of 1:250,000, but have been reduced to 1:500,000 for presentation in this report.

This report represents a technical assessment of the following advanced coal gasification processes: AVCO High Throughput Gasification (HTG) Process, Bell Single - Stage High Mass Flux (HMF) Process, Cities Service/Rockwell (CS/R) Hydrogasification Process, and the Exxon Catalytic Coal Gasification (CCG) Process. Each process is evaluated for its potential to produce SNG from a bituminous coal. In addition to identifying the new technology these processes represent, key similarities/differences, strengths/weaknesses, and potential improvements to each process are identified. The AVCO HTG and the Bell HMF gasifiers share similarities with respect to: short residence time (SRT), high throughput rate, slagging and syngas as the initial raw product gas. The CS/R Hydrogasifier is also SRT but is non-slagging and produces a raw gas high in methane content. The Exxon CCG gasifier is a long residence time, catalytic fluidbed reactor producing all of the raw product methane in the gasifier.

This report describes preliminary results of an ongoing study of the volcanic stratigraphy, caldera activity, and known and potential mineralization of the Chinati Mountains area of Trans-Pecos Texas. Many ore deposits are spatially associated with calderas and other volcanic centers. A genetic relationship between calderas and base and precious metal mineralization has been proposed by some and denied by others. Steven and others have demonstrated that calderas provide an important setting for mineralization in the San Juan volcanic field of Colorado. Mineralization is not found in all calderas but is apparently restricted to calderas that had complex, postsubsidence igneous activity. A comparison of volcanic setting, volcanic history, caldera evolution, and evidence of mineralization in Trans-Pecos to those of the San Juan volcanic field, a major mineral producer, indicates that Trans-Pecos Texas also could be an important mineralized region. The Chianti caldera complex in Trans-Pecos Texas contains at least two calderas that have had considerable postsubsidence activity and that display large areas of hydrothermal alteration and mineralization. Abundant prospects in Trans-Pecos and numerous producing mines immediately south of the Trans-Pecos volcanic field in Mexico are additional evidence that ore-grade deposits could occur in Texas.

Alternative energy conserving systems for use in citrus processing plants were synthesized and evaluated in terms of energy savings and economic return. The energy intensive operations that are carried out in citrus processing plants include conveying and extraction, concentration, peel drying, refrigeration, and pasteurization. The alternative energy conserving systems are synthesized from components and subsystems that are arranged to make use of energy cascading and thermodynamic regeneration to reduce the overall energy usage. System requirements such as air pollution rules and plant processing load cycles, a characterization of major operations, description of alternative system concepts, and the evaluation of alternative systems in terms of economic parameters and energy usage are identified.

Systems that reduce energy usage and are economically viable in the citrus fruit processing industry are identified. The preliminary results of Phase I are presented. Alternative systems to be considered are classified and denoted as central, modular, integrated, and combined. Progress is reported on the central and modular systems. (MCW)

The Johns Hopkins University Applied Laboratory, under contracts with several agencies of the federal government, is engaged in developing energy resources, utilization concepts, and monitoring and storage methods. This Quarterly Report summarizes the work on the various tasks as of 31 March 1981. The Energy Quarterly Report is divided into three sections. The first, Geothermal Energy Development Planning and Technical Assistance, supported by the Department of Energy/Division of Geothermal Energy (DOE/DGE), contains reports on the progress of geothermal-related tasks on which effort was concentrated during the quarter. The second section, Siting of Critical Facilities, supported by the Nuclear Regulatory Commission (NRC) and in-house funds, contains reports on geologic investigations in western Connecticut and areas in adjacent New York, development of seismotectonic domains, and fracture permeability in siting hazardous waste repositories. The third section, Energy Conservation and Storage Techniques, supported by the Argonne National Laboratory (ANL), reports on institutional barriers to landfill methane recovery and the need for state legislation.

Progress, present status, and data are presented for work in the areas of silicon substrate materials epitaxial substrates and epitaxial growth and of solar cells production process sequence determination especially, and also in the areas of process specification, minimodule design, process and design verification, and cost evaluation and projections. (LEW)

Activities included the identification and delineation of geothermal prospects, the comparison of conventional energy use patterns with geothermal sources, the preparation of area development plans and the compilation of detailed economic and energy data for each area. Current emphasis is on commercialization. (MHR)

Four detailed intercomparisons were made for a number of models of cavity-type self-calibrating radiometers (pyrheliometers). Each intercomparison consisted of simultaneous readings of pyrheliometers at 30-second intervals in runs of 10 minutes, with at least 15 runs per intercomparison. Twenty-seven instruments were in at least one intercomparison, and five were in all four. Summarized results and all raw data are provided from the intercomparisons.

By amplitude-modulating the driving voltage of an acoustic levitating apparatus, a strong core-centering force can be generated in a submillimeter compound droplet system suspended by the radiation pressure in a gaseous medium. Depending on the acoustic characteristics of the droplet system, it has been found that the technique can be utilized advantageously in the multiple-layer coating of an inertial-confinement-fusion pellet.

None

A total of five hot springs and 25 thermal wells are located within the combined counties. The water discharged from these hot springs and wells may be suitable for applications such as process heat and space heating and cooling. Within Cochise county there are two large firms which are capable of using 70/sup 0/C (158/sup 0/F) geothermal water for their process heat requirements but the potential use of geothermal energy in Santa Cruz county is limited due to the absence of industry within the county. The amount of geothermal energy on line as a function of time under both private and city-owned utility development is also predicted using a computer simulation model.

Geothermal potential in Graham and Greenlee counties both of which contain significant quantities of geothermal energy that could be used for industrial, agricultural or residential use, is described. Projections are made of geothermal heat on line under both private and city-owned utility development. Potential users of geothermal energy, however, are limited since this area is sparsely populated and lacks an industrial base. Only a couple of industries were identified which could use geothermal energy for their process heat needs.

Maricopa county is the area of Arizona receiving top priority since it contains over half of the state's population. The county is located entirely within the Basin and Range physiographic region in which geothermal resources are known to occur. Several approaches were taken to match potential users to geothermal resources. One approach involved matching some of the largest facilities in the county to nearby geothermal resources. Other approaches involved identifying industrial processes whose heat requirements are less than the average assessed geothermal reservoir temperature of 110/sup 0/C (230/sup 0/F). Since many of the industries are located on or near geothermal resources, geothermal energy potentially could be adapted to many industrial processes.

Pima County is located entirely within the Basin and Range physiographic province in which geothermal resources are known to occur. Continued growth as indicated by such factors as population growth, employment and income will require large amounts of energy. It is believed that geothermal energy could provide some of the energy that will be needed. Potential users of geothermal energy within the county are identified.

Wells drilled in the county provide evidence of geothermal energy sufficient for process heat and space heating and cooling applications. Annual energy consumption was estimated for industries whose process heat requirements are less than 105/sup 0/C (221/sup 0/F). This information was then used to model the introduction of geothermal energy into the process heat market. Also, agriculture and agribusiness industries were identified. Many of these are located on or near a geothermal resource and might be able to utilize geothermal energy in their operations.

One hot spring and 33 wells drilled in the county discharge water at temperatures sufficient for direct-use geothermal applications such as process heat and space heating and cooling. Currently, one industry within the county has been identified which may be able to use geothermal energy for its process heat requirements. Also, a computer simulation model was used to predict geothermal energy on line as a function of time under both private and city-owned utility development of the resource.

An economic feasibility study for a geothermal community heating system has been made for the residential heat load of Cape Charles, Virginia using the JHU/APL GRITS Computer Program. The effects of inflation, interest rates, wellhead temperatures, and the addition of reinjection wells are investigated.

This report is one of a series of studies that have been made by the Applied Physics Laboratory, or its subcontractors, to examine the technical and economic feasibility of the utilization of geothermal energy at the request of potential users.

A tool is presented to quantify the risks of geothermal projects, the Geothermal Probabilistic Cost Model (GPCM). The GPCM model is used to evaluate a geothermal reservoir for a binary-cycle electric plant at Heber, California. Three institutional aspects of the geothermal risk which can shift the risk among different agents are analyzed. The leasing of geothermal land, contracting between the producer and the user of the geothermal heat, and insurance against faulty performance are examined. (MHR)

Research during October 1979 to September 1980 is summarized. Areas covered include: accelerator operations; positron-electron project; stochastic beam cooling; high-field superconducting magnets; accelerator theory; neutral beam sources; and heavy ion fusion. (GHT)

A column-flow cesium migration experiment has been conducted in support of the safety assessment program for the Waste Isolation Pilot Plant (WIPP) in Southeastern New Mexico. The column was a monolithic cylinder of Magenta dolomite obtained from a core sample drilled near the proposed WIPP site. The fluid was a Magenta equilibrated de-ionized water solution that had been doped with 0.001 ppM of /sup 137/Cs. The experiment ran continuously for an 18 month period at flow rates comparable to those measured for natural groundwater at the site. After flowing for 18 months, the apparatus was disassembled and the dolomite column examined for cesium distribution. Cross sectional radiographs of the sample showed that most of the cesium had penetrated only 0.4 cm into the solid Magenta column with a well defined wave front. On the other hand, trace quantities (2 x 10/sup -7/ ppM) of /sup 137/Cs were detected in effluent samples collected during the experiment. The distribution coefficient (120 ml/gm) calculated (assuming porous flow) from the average depth of cesium penetration (0.3 cm) is considerably less than the value obtained from a batch equilibration measurement made on the same system (650 ml/gm), indicating that cesium will migrate through Magenta rock …

To provide detailed and accurate electric fields in the ion source-puller region and at the dee dummy-dee gap for a cyclotron, a relaxation method solution of Laplace's equation has been used. A conventional difference equation with variation in mesh size and relaxation factor as well as different schemes for boundary corrections have been developed to achieve roughly 1 percent accuracy for a thre-dimensional domain with 10/sup 6/ mesh points. Although the computation requires considerable computer time, it is much less expensive than electrolytic tank analogue methods for measuring field distributions around complex electrode configurations.