This report covers work done by the Pile Engineering Groups and work done on special assignments. Topics covered include: slug blistering and corrosion; graphite allocation to DR pile; slug molding; segmental discharge; Van Stone corrosion; flow laboratory modifications; downcomer at B pile; downcomer at D pile; annealing of pile graphite; replacement of pile atmosphere with CO{sub 2}; unit motion; beta experiment; can opening; slug annealing; new technical building, 300 area; and ruptured slugs.

This report presents brief test descriptions and analysis results for multiple, stress-level slug tests that were performed at selected test/depth intervals within well 399-3-21 as part of the 300-Area volatile organic compound characterization program. The test intervals were characterized as the borehole was advanced to its final drill depth (45.7 m) and before its completion as a monitor-well facility. The primary objective of the slug tests was to provide information pertaining to the vertical distribution of hydraulic conductivity with depth at this location and to select the final screen-depth interval for the monitor well. This type of characterization information is important for predicting/simulating contaminant migration (i.e., numerical flow/transport modeling) and designing proper monitor-well strategies within this area.

This annual operations report describes the requirements followed and activities conducted to inspect, monitor, and maintain the items installed during performance of the Waste Area Group 3, Operable Unit 3-13, Group 1, Tank Farm Interim Action, at the Idaho Nuclear Technology and Engineering Center. This report describes inspection and monitoring activities fro the surface-sealed areas within the tank farm, concrete-lined ditches and culverts in and around the tank farm, the lift station, and the lined evaporation pond. These activities are intended to assure that the interim action is functioning adequately to meet the objectives stated in the Operable Unit 3-13, Record of Decision for the Group 1, Tank Farm Interim Action, (DOE/ID-10660) and as amended by the agreement to resolve dispute, which was effective in February 2003.

Automated alignment for the National Ignition Facility (NIF) is accomplished using a large-scale parallel control system that directs 192 laser beams along the 300-m optical path. The beams are then focused down to a 50-micron spot in the middle of the target chamber. The entire process is completed in less than 50 minutes. The alignment system commands 9,000 stepping motors for highly accurate adjustment of mirrors and other optics. 41 control loops per beamline perform parallel processing services running on a LINUX cluster to analyze high-resolution images of the beams and their references. This paper describes the status the NIF automatic alignment system and the challenges encountered as NIF development has transitioned from building the laser, to becoming a research project supporting a 24 hour, 7 day laser facility. NIF is now a continuously operated system where performance monitoring is increasingly more critical for operation, maintenance, and commissioning tasks. Equipment wear and the effects of high energy neutrons from fusion experiments are issues which alter alignment efficiency and accuracy. New sensors needing automatic alignment assistance are common. System modifications to improve efficiency and accuracy are prevalent. Handling these evolving alignment and maintenance needs while minimizing the impact on NIF experiment …

A model-based approach is developed to solve an adaptive ocean acoustic signal processing problem. Here we investigate the design of model-based identifier (MBID) for a normal-mode model developed from a shallow water ocean experiment and then apply it to a set of experimental data demonstrating the feasibility of this approach. In this problem we show how the processor can be structured to estimate the horizontal wave numbers directly from measured pressure sound speed thereby eliminating the need for synthetic aperture processing or a propagation model solution. Ocean acoustic signal processing has made great strides over the past decade necessitated by the development of quieter submarines and the recent proliferation of diesel powered vessels.

One of the objectives of the U.S. Department of Defense is to standardize all classes used in object-oriented deployment simulations by developing a standard class attribute representation and behavior for all deployment simulations that rely on an underlying class representation. The EXtensive Hierarchy and Object Representation for Transportation Simulations (EXHORT) is a class framework composed of two hierarchies that together constitute a standard and consistent class attribute representation and behavior that could be used directly by a large set of deployment simulations. The first hierarchy, the Transportation Class Hierarchy (TCH), was submitted to the Army Modeling and Simulation Office's (AMSO) Army Standards Repository in 1999 and presented at the Fall Simulation Interoperability Workshop in the same year. The second hierarchy, the Infrastructure Class Hierarchy (ICH), describes the encapsulation of the rest of the defense transportation system and is the primary focus of this paper. The entire EXHORT framework lets deployment simulations use the same set of underlying class data, ensures transparent exchanges, reduces the effort needed to integrate simulations, and permits a detailed analysis of the defense transportation system.

As a first step towards developing liquid lithium target technology for a future high-power nuclear physics fragmentation facility, an adjustable thickness Li/Be hybrid target is being constructed for use at the NSCL. This target will use beryllium windows with flowing lithium. The lithium serves as a part of the target as well as the coolant. Up to 1 kW of beam power is dissipated in the target and is carried away by the recirculating liquid lithium loop. It is designed for high power beams in the mass range from oxygen to calcium. Tapered beryllium windows combined with a uniform thickness lithium channel gives an overall target thickness ranging from 0.7 g/cm{sup 2} to 3 g/cm{sup 2}, which is adjusted by moving the target vertically. The target system design is complete and is described in this paper.

This report presents the results of work performed from January 1, 1979 through March 31, 1979 on the Advanced Gas Cooled Nuclear Reactor Materials Evaluation and Development Program. The objectives of this program are to evaluate candidate alloys for Very High Temperature Reactor (VHTR) Nuclear Process Heat (NPH) and Direct Cycle Helium Turbine (DCHT) applications, in terms of the effect of simulated reactor primary coolant (helium containing small amounts of various other gases), high temperatures, and long time exposures, on the mechanical properties and structural and surface stability of selected candidate alloys. Work covered in this report includes the activities associated with the creep-rupture testing of the test materials for the purpose of verifying the stresses selected for the screening creep test program, and the status of the simulated reactor helium supply system, testing equipment, and gas chemistry analysis instrumentation and equipment.

The objective of the Aerosol Best Estimate (AEROSOLBE) value-added product (VAP) is to provide vertical profiles of aerosol extinction, single scatter albedo, asymmetry parameter, and Angstroem exponents for the atmospheric column above the Central Facility at the ARM Southern Great Plains (SGP) site. We expect that AEROSOLBE will provide nearly continuous estimates of aerosol optical properties under a range of conditions (clear, broken clouds, overcast clouds, etc.). The primary requirement of this VAP was to provide an aerosol data set as continuous as possible in both time and height for the Broadband Heating Rate Profile (BBHRP) VAP in order to provide a structure for the comprehensive assessment of our ability to model atmospheric radiative transfer for all conditions. Even though BBHRP has been completed, AEROSOLBE results are very valuable for environmental, atmospheric, and climate research.

PS Enterprises, Inc. investigated a flexible, downwind, free-yaw, five-blade rotor system employing pultruded blades. A rotor was designed, manufactured and tested in the field. A preliminary design study and proof of concept test were conducted to assess the feasibility of using pultruded blades for wind turbine rotors. A 400 kW turbine was selected for the design study and a scaled 80 kW rotor was fabricated and field tested as a demonstration of the concept. The design studies continued to support the premise that pultruded blades offer the potential for significant reductions in rotor weight and cost. The field test provided experimental performance and loads data that compared well with predictions using the FLEXDYNE aeroelastic analysis. The field test also demonstrated stable yaw behavior and the absence of stall flutter over the wind conditions tested. During the final year of the contract, several studies were conducted by a number of independent consultants to address specific technical issues related to pultruded blades that could impact the commercial viability of turbines using this technology. The issues included performance, tower strikes, yaw stability, stall flutter, fatigue, and costs. While the performance of straight pultruded blades was projected to suffer a penalty of about 13% …

Radiocarbon dating, with special reference to the modern bomb-curve, can provide useful information to elucidate the date of death of skeletonized human remains. Interpretation can be enhanced with analysis of different types of tissues within a single skeleton because of the known variability of formation times and remodeling rates. Analysis of radiocarbon content of teeth, especially the enamel in tooth crowns provides information about the date of formation in the childhood years and in consideration of the known timing of tooth formation can be used to estimate the birth date after 1950 A.D. Radiocarbon analysis of modern cortical and trabecular bone samples from the same skeleton may allow proper placement on the pre-1963 or post-1963 sides of the bomb-curve since most trabecular bone generally undergoes more rapid remodeling than does most cortical bone. Pre-1963 bone formation would produce higher radiocarbon values for most trabecular bone than for most cortical bone. This relationship is reversed for formation after 1963. Radiocarbon analysis was conducted in this study on dental, cortical and trabecular bone samples from two adult individuals of known birth (1925 and 1926) and death dates (1995 and 1959). As expected, the dental results correspond to pre-bomb bomb-curve values reflecting conditions …

An idealized model is postulated embodying the essential features of industrial caustic-chlorine cells with horizontal flowing-mercury cathodes. This model is examined in detail, and relations expressing the local anode potential, cathode potential, and ohmic potential drop in the electrolyte in terms of local current density and other parameters are established. These relations are combined to give a system of equations relating current density at any location along the cell to applied total potential and to operating conditions in the cell upstream of the point in question. Numerical solutions of these equations for several cases of cell operating conditions are carried out on a digital computing machine. The effects of changes in operating parameters upon average current density, individual electrode potentials, and current distribution are evaluated. (auth)

There is great interest in being able to use the x-ray output from a Z-pinch for equation of state measurements at extreme conditions. However, the direct x-ray output form the pinch produces a very sharp and rapidly attenuating pressure pulse in target materials. To obtain high quality measurements with this source, a mechanism for generating non-attenuating waves is needed. One possibility involves using the x-ray source to throw a near-normal density intermediate drive at the target, a situation similar to more conventional configurations. To scope out preliminary design parameters, they used the ALEGRA code to simulate a number of different possibilities involving the driver and the gap between it and the target. They used a somewhat idealized radiation source--a main x-ray pulse 30 ns long at its base and peaking at a blackbody temperature of 100 eV. The calculations suggest that a 100-micron aluminum driver with a 90-micron gap will yield a 15-ns-wide non-attenuating pulse with an amplitude of over 250 GPa.

None

The Army Package Power Reactor (APPR-1) control system was analyzed to find its response to a startup accident. The system was found to be adequate, at 0.086%/sec rod withdrawal, for operation of at least twice the rated power. (C.J.G.)

Pacific Northwest National Laboratory (PNNL) established an area monitoring dosimeter program in accordance with Article 514 of the Department of Energy (DOE) Radiological Control Manual (RCM) in January 1993. This program is to minimize the number of areas requiring issuance of personnel dosimeters and to demonstrate that doses outside Radiological Buffer Areas are negligible. In accordance with 10 CFR Part 835.402 (a)(1)-(4) and Article 511.1 of the PNNL Radiological Control Program Description, personnel dosimetry shall be provided to 1) radiological workers who are likely to receive at least 100 mrem annually, and 2) declared pregnant workers, minors, and members of the public who are likely to receive at least 50 mrem annually. Program results for calendar years 1993-2005 confirm that personnel dosimetry is not needed for individuals located in areas monitored by the program.

None

Anthropogenic sulfur dioxide emissions from energy-producing and metal production activities have become an important factor in better understanding the relationship between humans and the environment. Concerns about (1) acid rain effects on the environment and (2) anthropogenic aerosols affecting possible global change have prompted interest in the transformation and fate of sulfur in the environment. One step in assessing the importance of sulfur emissions is the development of a reliable regional emission inventory of sulfur as a function of time. The objective of this research effort was to create a homogeneous database for historical sulfur emission estimates for the world. The time from 1850--1990 was selected to include the period of industrialization form the time the main production of fuels and minerals began until the most recent year for which complete production data exist. This research effort attempts to correct some of the deficiencies associated with previous global sulfur emission estimates by (1) identifying those production activities that resulted in sulfur emissions by country and (2) calculating historical emission trends by country across years. An important component of this study was the comparison of the sulfur emission results with those of previous studies.

Nano-focusing and brightness preservation for ever brighter synchrotron radiation and free electron laser beamlines require surface slope tolerances of x-ray optics on the order of 100 nrad. While the accuracy of fabrication and ex situ metrology of x-ray mirrors has improved over time, beamline in situ performance of the optics is often limited by application specific factors such as x-ray beam heat loading, temperature drift, alignment, vibration, etc. In the present work, we discuss the recent results from the Advanced Light Source developing high accuracy, in situ, at-wavelength wavefront measurement techniques to surpass 100-nrad accuracy surface slope measurements with reflecting x-ray optics. The techniques will ultimately allow closed-loop feedback systems to be implemented for x-ray nano-focusing. In addition, we present a dedicated metrology beamline endstation, applicable to a wide range of in situ metrology and test experiments. The design and performance of a bendable Kirkpatrick-Baez (KB) mirror with active temperature stabilization will also be presented. The mirror is currently used to study, refine, and optimize in situ mirror alignment, bending and metrology methods essential for nano-focusing application.

The interaction of water with Si- and C- terminated {beta}-SiC(001) surfaces was investigated by means of ab initio molecular dynamics simulations. Irrespective of coverage, varied from 1/4 to 1 monolayer, we found that water dissociates on the Si-terminated surface, substantially modifying the clean surface reconstruction, while the C-terminated surface is nonreactive and hydrophobic. Based on our results, we propose that STM images and photoemission experiments may detect specific changes induced by water on both the structural and electronic properties of SiC(001) surfaces.

This paper updates the on-going effort at Lawrence Livermore National Laboratory to develop autonomous, agile micro-satellites (MicroSats). The objective of this development effort is to develop MicroSats weighing only a few tens of kilograms, that are able to autonomously perform precision maneuvers and can be used telerobotically in a variety of mission modes. The required capabilities include satellite rendezvous, inspection, proximity-operations, docking, and servicing. The MicroSat carries an integrated proximity-operations sensor-suite incorporating advanced avionics. A new self-pressurizing propulsion system utilizing a miniaturized pump and non-toxic mono-propellant hydrogen peroxide was successfully tested. This system can provide a nominal 25 kg MicroSat with 200-300 m/s delta-v including a warm-gas attitude control system. The avionics is based on the latest PowerPC processor using a CompactPCI bus architecture, which is modular, high-performance and processor-independent. This leverages commercial-off-the-shelf (COTS) technologies and minimizes the effects of future changes in processors. The MicroSat software development environment uses the Vx-Works real-time operating system (RTOS) that provides a rapid development environment for integration of new software modules, allowing early integration and test. We will summarize results of recent integrated ground flight testing of our latest non-toxic pumped propulsion MicroSat testbed vehicle operated on our unique dynamic air-rail.

A persistent problem in the analysis of Lamb wave signatures in experimental data is the fact that several different modes appear simultaneously in the signal. The modes overlap in both the frequency and time domains. Attempts to separate the overlapping Lamb wave signatures by conventional signal processing methods have been unsatisfactory. This paper reports an exciting alternative to conventional methods. Severely overlapping Lamb waves are found to be readily separable by Bayesian parameter estimation. The authors have used linear-chirped Gaussian-windowed sinusoids as models of each Lamb wave mode. The separation algorithm allows each mode to be examined individually.

This document offers a menu of 18 different, yet complimentary preferred practices and policies. The best practices cover all phases of the wind energy development process - from the policies that allow for wind development, to the sustainable operation of a wind project, to the best practices for decommissioning a spent turbine - including applications for offshore wind. The practices include those that have been previously tested and proven effective, as well as new practices that were identified by experts in the field as needed for future wind developments. Each best practice includes information about the opportunities and challenges (pros and cons), and offers a case example that illustrates how that best practice is being utilized by a particular jurisdiction or wind project. The practices described in this publication were selected by a diverse group of interests from the Great Lakes Wind Collaborative that included environmental groups, industry, and federal, state and local government regulators. They were identified through a year long process that included a literature review, online survey and interviews with individuals from the public, private and non-profit sectors.

This report offers a menu of 18 different, yet complementary, preferred practices and policies. The best practices cover all phases of the wind energy development process - from the policies that allow for wind development, to the sustainable operation of a wind project, to the best practices for decommissioning a spent turbine - including applications for offshore wind. Each best practice describes the opportunities and challenges (pros and cons), and offers a case example that illustrates how that best practice is being utilized by a particular jurisdiction or wind project. The practices described in this publication were selected by a diverse group of interests from the Great Lakes Wind Collaborative that included environmental groups, industry, academia, and federal, state and local government regulators. The practices were identified through a year-long process that included a literature review, online survey and interviews with individuals from the public, private and non-profit sectors. Optimally, a suite of these best practices would be applied in an appropriate combination to fit the conditions of a particular wind project or a set of wind projects within a given locality or region.