Degree Level
Country
States
Decade
Year
Month
Day
Language
194,006 Matching Results
Results open in a new window/tab.
A 2-GHz Rectangular Corrugated Horn
We have designed, constructed and tested a large, rectangular horn antenna with a center frequency of 2.0 GHz, corrugated on the E-plane walls, made out of aluminum sheet. A new technique has been developed to solder thin aluminum strips onto the back plane to form the corrugations. The radiation beam pattern shows half-power beamwidths of 12{sup 0} and 14{sup 0} in the H and E planes respectively, and side lobe response below -40 dB at angles greater than 50{sup 0} from horn axis. The measured return loss is less than -20 dB (VSWR < 1.22) between 1.7 and 2.3 GHz; insertion loss is less than 0.15 dB.
Date:
October 1, 1991
Creator:
Bersanelli, M.; Bensadoun, M.; De Amici, Giovanni; Limon, M.; Smoot, George F.; Tanaka, S. et al.
Object Type:
Article
System:
The UNT Digital Library
N = 2 Maxwell-Einstein Supergravity Theories: Their Compact and Non-Compact Gaugings and Jordan Algebras
In this talk we give a review of our work on the construction and classification of N = 2 Maxwell-Einstein Supergravity theories (MESGT), study of the underlying algebraical and geometrical structure of these theories, and their compact and non-compact gaugings. We begin by summarizing our construction of the N = 2 MESGT's in five dimensions and give a geometrical interpretation to various scalar dependent quantities in the Lagrangian, based on the constraiants implied by supersymmetry. This is followed by a complete classification of the N = 2 MESGT's whose target manifolds parametrized by the scalar fields are symmetric spaces. 39 refs.
Date:
January 1, 1985
Creator:
Guenaydin, M.; Sierra, G. & Townsend, P.K.
Object Type:
Article
System:
The UNT Digital Library
2 meg-ampere prototype levitated coil for multipole fusion
The coils major diameter is 1.0 meter and it occupies a cross-section which is about 0.2 meter minor in diameter. The prototype coil will carry four times the current of the largest such magnet built to date. As a result, the peak induction in the coil is about 8 T and the stored magnetic energy will be around 3 MJ. The paper describes the proposed Nb/sub 3/SN superconductor, the quench protection system which is based on the LBL shorted secondary concept, the isochroic refrigeration storage system which stores about 5 kJ of refrigeration between 4.5/sup 0/K and 7/sup 0/K, and the persistent switch.
Date:
November 1, 1979
Creator:
Green, M. A. & Glueck, R.
Object Type:
Article
System:
The UNT Digital Library
A 2-Megawatt load for testing high voltage dc power supplies
A high power water-cooled resistive load, capable of dissipating 2 Megawatts at 95 kilovolts is being designed and built. The load utilizes wirewound resistor elements suspended inside insulating tubing contained within a pressure vessel which is supplied a continuous flow of deionized water for coolant. A sub-system of the load is composed of non-inductive resistor elements in an oil tank. Power tests conducted on various resistor types indicate that dissipation levels as high as 22 times the rated dissipation in air can be achieved when the resistors are placed in a turbulent water flow of at least 15 gallons per minute. Using this data, the load w.as designed using 100 resistor elements in a series arrangement A single-wall 316 stainless steel pressure vessel with flanged torispherical heads is built to contain the resistor assembly and deionized water. The resistors are suspended within G-11 tubing which span the cylindrical length of the vessel. These tubes are supported by G-10 baffles which also increase convection from the tubes by promoting turbulence within the surrounding water.
Date:
June 1, 1993
Creator:
Horan, D.; Kustom, R.; Ferguson, M. & Primdahl, K.
Object Type:
Article
System:
The UNT Digital Library
A 2-MeV microwave thermionic gun
A high-gradient, S-band microwave gun with a thermionic cathode is being developed in a collaborative effort by AET, Varian, and SSRL. A prototype design using an upgraded Varian dispenser cathode mounted with thermal isolation directly in the first half-cell of a 1-1/2 cell, side-coupled, standing-wave cavity has been fabricated and is being tested. Optimization of the cavity shape and beam formation was done using SUPERFISH, MASK, and PARMELA. An overview of design details, as well as the status of in-progress beam tests, will be presented. 9 refs., 6 figs.
Date:
August 1, 1989
Creator:
Tanabe, E.; Borland, M.; Green, M. C.; Miller, R. H.; Nelson, L. V.; Weaver, J. N. et al.
Object Type:
Article
System:
The UNT Digital Library
2-mm microwave interferometer
A 2-mm microwave interferometer has been developed, and phase shift measurements have been made on the Baseball II experiment. The interferometer system employs a 140-GHz receiver for double down conversion of the plasma signal to a 60-MHz, IF frequency. The 140-GHz references signal is also down-converted and compared with the plasma signal to provide the desired phase change of the signal passing through the plasma. A feedback voltage from a 60-MHz discriminator to a voltage-controlled oscillator in the receiver provides frequency stability of the 60-MHz IF signals.
Date:
March 1, 1977
Creator:
Futch, A. H. & Mortensen, W. K.
Object Type:
Report
System:
The UNT Digital Library
A 2-MV multi-beam injector for heavy ion fusion
Construction of a sixteen beam (0.5 A per beam) injector for use in scaled heavy ion fusion experiments is underway at LBL. The machine was designed and partially constructed at LANL. The injector is designed to use carbon arc sources which will provide 25 mA/cm/sup 2/ of extractable current density. The plasma from the arcs is confined electrostatically from drifting into the ion gun before firing the extraction pulse. The acceleration column consists of a set of aperture lenses which both transport the beam and attenuate backstreaming electrons. The acceleration column is mounted inside a 28-inch diameter brazed alumina insulating module. The high voltage for the injector is provided by an inductively loaded and graded Marx generator which resides inside a pressure vessel filled with a 65 psig mixture of 30/percent/ SF/sub 6/ and 70/percent/ N/sub 2/. Data is presented showing the performance of single and multiple carbon arc sources. Measurements show that adequate current density is available. Emittance measurements and efforts to improve emittance and reproducibility are shown. Tests with a 5-tray section of the full 18 tray generator are described showing the evolution of the generator design. 5 refs., 3 figs.
Date:
June 1, 1988
Creator:
Rutkowski, H. L.; Faltens, A.; Vanecek, D.; Pike, C.; Humphries, S., Jr. & Meyer, E. A.
Object Type:
Article
System:
The UNT Digital Library
2-MW plasmajet facility thermal tests of concrete. [PWR and BWR]
A test was made in the 2-Megawatt Plasmajet Facility to obtain experimental data relative to the thermal response of concrete to incident heat flux. 14.6 cm diameter by 8.0 cm long concrete cylinders were positioned in a supersonic flow of heated nitrogen from an arc heater. The end of the concrete cylinders impacted by the flow were subjected to heat fluxes in the range of 0.13 to 0.35 kW/cm/sup 2/. Measurements included cold wall surface heat flux and pressure distributions, surface and indepth temperatures, ablation rates, and surface emission spectrographs. The test was part of the Sandia light water reactor safety research program and complements similar tests made in the Radiant Heat Facility at heat fluxes from 0.03 to 0.12 kW/cm/sup 2/. A description of the tests and a tabulation of test data are included.
Date:
July 1, 1977
Creator:
Goin, Kenneth L.
Object Type:
Report
System:
The UNT Digital Library
2-pi Photoproduction from CLAS and CB-ELSA - The Search for Missing Resonances
2-pi-photoproduction is one of the promising reactions to search for baryon resonances that have been predicted but have not yet been observed. The gamma-rho --> rho-pi{sup 0}-pi{sup 0}(CB-ELSA) and the gamma-rho --> rho-pi{sup +}-pi{sup -} (CLAS) data show interesting resonance structures. A partial wave analysis (PWA) has to be done to determine which baryon resonances contribute what their quantum numbers and their relative couplings to the different accessible rho-2-pi-channels and to the photon are. First preliminary PWA-results on the lowest energy rho-pi{sup 0}-pi{sup 0} data (sq rt s<1.8 GeV)look very promising. From an extension of this analysis to higher energies combining the rho-pi{sup 0}-pi{sup 0} and the rho-pi{sup +}-pi{sup -}-data, one can expect; interesting results on resonances decaying into Delta-pi, N-rho, N(pi-pi)s, N*-pi, and Delta*-pi.
Date:
October 1, 2003
Creator:
Thoma, Ulrike
Object Type:
Article
System:
The UNT Digital Library
N = 2 string amplitudes
In physics, solvable models have played very important roles. Understanding a simple model in detail teaches us a lot about more complicated models in generic situations. Five years ago, C. Vafa and I found that the closed N = 2 string theory, that is a string theory with the N = 2 local supersymmetry on the worldsheet, is classically equivalent to the self-dual Einstein gravity in four spacetime dimensions. Thus this string theory is solvable at the classical level. More recently, we have examined the N = 2 string partition function for spacial compactifications, and computed it to all order in the string perturbation expansion. The fact that such computation is possible at all suggests that the N = 2 string theory is solvable even quantum mechanically.
Date:
August 1, 1995
Creator:
Ooguri, H.
Object Type:
Article
System:
The UNT Digital Library
2 {times} 2 TeV {mu}{sup +}{mu}{sup {minus}} collider: Lattice and accelerator-detector interface study
The design for a high-luminosity {mu}{sup +}{mu}{sup {minus}} superconducting storage ring is presented based on first-pass calculations. Special attention is paid to two Iowa interaction regions (IR) whose optics are literally interlaced with the collider detectors. Various sources of backgrounds in IR are explored via realistic Monte Carlo simulations. An improved design of the collider lattice in the neighborhood of the interaction points (EP) is determined by the need to reduce significantly background levels in the detectors.
Date:
May 1, 1995
Creator:
Gelfand, N. M. & Mokhov, N. V.
Object Type:
Article
System:
The UNT Digital Library
A 2 to 4 nm high power FEL on the SLAC linac
We report the results of preliminary studies of a 2 to 4 nm SASE FEL, using a photoinjector to produce the electron beam, and the SLAC linac to accelerate it to an energy up to 10 GeV. Longitudinal bunch compression is used to increases ten fold the peak current to 2.5 kA, while reducing the bunch length to the subpicosecond range. The saturated output power is in the multi-gigawatt range, producing about 10{sup 14} coherent photons within a bandwidth of about 0.2% rms, in a pulse of several millijoules. At 120Hz repetition rate the average power is about 1 W. The system is optimized for x-ray microscopy in the water window around 2 to 4 nm, and will permit imaging a biological sample in a single subpicosecond pulse.
Date:
September 1, 1992
Creator:
Pellegrini, C.; Rosenzweig, J.; Nuhn, H. D.; Pianetta, P.; Tatchyn, R.; Winick, H. et al.
Object Type:
Article
System:
The UNT Digital Library
2 x 2 Polyethylene Reflected and Moderated Highly Enriched Uranium System with Rhenium
The 2 × 2 array HEU-Re experiment was performed on the Planet universal critical assembly machine on November 4th, 2003 at the Los Alamos Critical Experiments Facility (LACEF) at Los Alamos National Laboratory (LANL). For this experiment, there were 10 ½ units, each full unit containing four HEU foils and two rhenium foils. The top unit contained only two HEU foils and two rhenium foils. A total of 42 HEU foils were used for this experiment. Rhenium is a desirable cladding material for space nuclear power applications. This experiment consisted of HEU foils interleaved with rhenium foils and is moderated and reflected by polyethylene plates. A unit consisted of a polyethylene plate, which has a recess for rhenium foils, and four HEU foils in a single layer in the top recess of each polyethylene plate. The Planet universal criticality assembly machine has been previously used in experiments containing HEU foils interspersed with SiO2 (HEU-MET-THERM-001), Al (HEU-MET-THERM-008), MgO (HEU-MET-THERM-009), Gd foils (HEU-MET-THERM-010), 2 × 2 × 26 Al (HEU-MET-THERM-012), Fe (HEU-MET-THERM-013 and HEU-MET-THERM-015), 2 × 2 × 23 SiO2 (HEU-MET-THERM-014), 2 × 2 × 11 hastalloy plates (HEU-MET-THERM-016), and concrete (HEU-MET-THERM-018). The 2 × 2 array of HEU-Re is considered acceptable …
Date:
September 1, 2010
Creator:
Ellis, A. Nichole; Hutchinson, Jesson; Bess, John D.; Polyakov, Dmitry N.; Glushkov, Evgeny S. & Glushkov, Alexey E.
Object Type:
Report
System:
The UNT Digital Library
2 x 2 TeV mu(superscript +) mu (superscript) collider
The scenarios for high-luminosity 2 x 2 TeV and 250 x 250 GeV {mu}{sup +}{mu}{sup -} colliders are presented. Having a high physics potential, such a machine has specific physics and technical advantages and disadvantages when compared with an e{sup +}e{sup -} collider. Parameters for the candidate designs and the basic components - proton source, pion production and decay channel, cooling, acceleration and collider storage ring - are considered. Attention is paid to the areas mostly affecting the collider performance: targetry, energy spread, superconducting magnet survival, detector backgrounds, polarization, environmental issues. 13 refs., 9 figs., 4 tabs.
Date:
October 1, 1996
Creator:
Mokhov, N. V. & Noble, R. J.
Object Type:
Article
System:
The UNT Digital Library
$3.5 Million in Savings Identified in Appleton Assessment: Plant-Wide Assessment Summary--Forest Products (Fact Sheet)
Summary of Appleton Paper, Inc.'s plant-wide assessment to identify energy and cost saving opportunities at the corporation's paper mill in West Carrollton, Ohio.
Date:
August 1, 2003
Creator:
unknown
Object Type:
Text
System:
The UNT Digital Library
$3.6 Million in Savings Identified in AMCAST Assessment (Revised)
Summary of AMCAST Industrial Corporation's plant-wide assessment to identify energy and cost saving opportunities at the corporation's facility in Wapakoneta, Ohio.
Date:
August 1, 2004
Creator:
unknown
Object Type:
Text
System:
The UNT Digital Library
3. 6 simplified methods for design
Simplified design analysis methods for elevated temperature construction are classified and reviewed. Because the major impetus for developing elevated temperature design methodology during the past ten years has been the LMFBR program, considerable emphasis is placed upon results from this source. The operating characteristics of the LMFBR are such that cycles of severe transient thermal stresses can be interspersed with normal elevated temperature operational periods of significant duration, leading to a combination of plastic and creep deformation. The various simplified methods are organized into two general categories, depending upon whether it is the material, or constitutive, model that is reduced, or the geometric modeling that is simplified. Because the elastic representation of material behavior is so prevalent, an entire section is devoted to elastic analysis methods. Finally, the validation of the simplified procedures is discussed.
Date:
January 1, 1981
Creator:
Nickell, R.E. & Yahr, G.T.
Object Type:
Article
System:
The UNT Digital Library
3.9 GHz superconducting accelerating 9-cell cavity vertical test results
The 3rd harmonic 3.9GHz accelerating cavity was proposed to improve the beam performance of the FLASH (TTF/DESY) facility [1]. In the frame of a collaborative agreement, Fermilab will provide DESY with a cryomodule containing a string of four cavities. In addition, a second cryomodule with one cavity will be fabricated for installation in the Fermilab photo-injector, which will be upgraded for the ILC accelerator test facility. The first 9-cell Nb cavities were tested in a vertical setup and they didn't reach the designed accelerating gradient [2]. The main problem was a multipactor in the HOM couplers, which lead to overheating and quenching of the HOM couplers. New HOM couplers with improved design are integrated in the next 9-cell cavities. In this paper we present all results of the vertical tests.
Date:
June 1, 2007
Creator:
Khabiboulline, Timergali; Cooper, Charles; Dhanaraj, Nandhini; Edwards, Helen; Foley, Mike; Harms, Elvin et al.
Object Type:
Article
System:
The UNT Digital Library
3.9 GHz superconducting accelerating 9-cell cavity vertical test results
None
Date:
June 1, 2007
Creator:
Khabiboulline, Timergali; Cooper, Charles; Dhanaraj, Nandhini; Edwards, Helen; Foley, Mike; Harms, Elvin et al.
Object Type:
Article
System:
The UNT Digital Library
3-10 keV and 0. 1- to 2-MeV observations of four gamma-ray bursts
Four catalogued ..gamma..-ray bursts that occurred between 79/3/7 and 79/7/31 have been observed over the 3 to 10 keV range by a joint NRL/Los Alamos experiment on the Air Force P78-1 satellite. The bursts were also well observed by members of the interplanetary network. In this paper we present hardness ratios, x-ray/..gamma..-ray luminosity ratios, and time histories. The most significant results presented herein can be summarized as follows: (1) gamma-ray bursters can emit fairly strongly at x-ray energies near the time of the ..gamma.. burst with L/sub x//L/sub ..gamma../ approx. .02 (L/sub x/ approx. 10/sup 37/ ergs s/sup -1/, 3 to 10 keV, assuming a distance of 1 kpc); (2) the centroid of the x-ray emission generally lags the ..gamma..-ray centroid, but there is also evidence for one or more types of x-ray precursor activity; (3) the ..gamma..-ray hardness ratios were not highly variable for these particular events. However, there is some evidence that the ..gamma..-ray spectra softened near the ends of the bursts when the x-ray/..gamma..-ray ratios were high; (4) the x-ray/..gamma..-ray power law number index during times of the strongest ..gamma..-ray emission ranged from 0.8 to approx. 1.1 for the four bursts; (5) the x-ray tail of GB790307 …
Date:
January 1, 1983
Creator:
Laros, J. G.; Evans, W. D.; Fenimore, E. E.; Klebesadel, R. W.; Shulman, S. & Fritz, G.
Object Type:
Article
System:
The UNT Digital Library
3-body final states in peripheral heavy-ion collisions: nuclear clustering structure and projectile excitation revisited
Even though peripheral heavy-ion collisions are less violent than their central counterparts, the large energy exchange between the reactants often leaves the primary products in excited particle-unstable states whose subsequent decay leads to 3 or more nuclei emerging in the final exit channel. These post-reaction, predominantly sequential de-excitation processes can sometimes provide interesting structural information about the parent nuclei. In fact, provided these processes are well understood, one can employ them as probes for studying initial properties of the fragments. This report discusses results of two experiments that deal with (1) nonstatistical, rare decay modes of the projectile, and (2) internal excitation energy of the projectile- and target-like fragments in peripheral collisions. The physics addressed in each is different, but the experimental and data-analysis techniques are so similar that it is relevant to join them together.
Date:
February 1, 1986
Creator:
Chan, Y.; Chavez, E.; Gazes, S.B.; Kamermans, R.; Schmidt, H.R.; Siwek-Wilczynska, J. et al.
Object Type:
Article
System:
The UNT Digital Library
3-D Analysis on Arbitrarily-Shaped Icrf Antennas and Faraday Shields
Cavity antennas with Faraday shields are proposed to couple ion cyclotron radio frequency power for heating fusion plasmas. This application requires small, high-power, low-frequency antennas. The results are presented of a theoretical study of the ICRF antennas being developed for this purpose at the Radio Frequency Test Facility (RFTF). The objectives of this work are to optimize experimental designs and to confirm test results. (MOW)
Date:
January 1, 1986
Creator:
Chen, G. L.; Whealton, J. H.; Baity, F. W.; Hoffman, D. J. & Owens, T. L.
Object Type:
Article
System:
The UNT Digital Library
3-D Cavern Enlargement Analyses
Three-dimensional finite element analyses simulate the mechanical response of enlarging existing caverns at the Strategic Petroleum Reserve (SPR). The caverns are located in Gulf Coast salt domes and are enlarged by leaching during oil drawdowns as fresh water is injected to displace the crude oil from the caverns. The current criteria adopted by the SPR limits cavern usage to 5 drawdowns (leaches). As a base case, 5 leaches were modeled over a 25 year period to roughly double the volume of a 19 cavern field. Thirteen additional leaches where then simulated until caverns approached coalescence. The cavern field approximated the geometries and geologic properties found at the West Hackberry site. This enabled comparisons are data collected over nearly 20 years to analysis predictions. The analyses closely predicted the measured surface subsidence and cavern closure rates as inferred from historic well head pressures. This provided the necessary assurance that the model displacements, strains, and stresses are accurate. However, the cavern field has not yet experienced the large scale drawdowns being simulated. Should they occur in the future, code predictions should be validated with actual field behavior at that time. The simulations were performed using JAS3D, a three dimensional finite element analysis …
Date:
March 1, 2002
Creator:
EHGARTNER, BRIAN L. & SOBOLIK, STEVEN R.
Object Type:
Report
System:
The UNT Digital Library
3-D DETERMINISTIC TRANSPORT METHODS RESEARCH AT LANL UNDER ASCI
None
Date:
January 1, 2000
Creator:
Morel, J.
Object Type:
Article
System:
The UNT Digital Library