A program called ``Innovative Billing?? has been developed to provide individualized energy information for a mass audience?the entireresidential customer base of an electric or gas utility. Customers receive a graph on the bill that compares that customer?s consumption with othersimilar customers for the same month. The program aims to stimulate customers to make ef?ciency improvements. To group as many as severalmillion customers into small ``comparison groups??, an automated method must be developed drawing solely from the data available to the utility.This paper develops and applies methods to compare the quality of resulting comparison groups.A data base of 114,000 customers from a utility billing system was used to evaluate Innovative Billing comparison groups, comparing fouralternative criteria: house characteristics (?oor area, housing type, and heating fuel); street; meter read route; billing cycle. Also, customers wereinterviewed to see what forms of comparison graphs made most sense and led to fewest errors of interpretation. We ?nd that good qualitycomparison groups result from using street name, meter book, or multiple house characteristics. Other criteria we tested, such as entire cycle, entiremeter book, or single house characteristics such as ?oor area, resulted in poor quality comparison groups. This analysis provides a basis forchoosing comparison groups based …

Investigating the role of demand resources in regional transmission planning has provided mixed results. On one hand there are only a few projects where demand response has been used as an explicit alternative to transmission enhancement. On the other hand there is a fair amount of demand response in the form of energy efficiency, peak reduction, emergency load shedding, and (recently) demand providing ancillary services. All of this demand response reduces the need for transmission enhancements. Demand response capability is typically (but not always) factored into transmission planning as a reduction in the load which must be served. In that sense demand response is utilized as an alternative to transmission expansion. Much more demand response is used (involuntarily) as load shedding under extreme conditions to prevent cascading blackouts. The amount of additional transmission and generation that would be required to provide the current level of reliability if load shedding were not available is difficult to imagine and would be impractical to build. In a very real sense demand response solutions are equitably treated in every region - when proposed, demand response projects are evaluated against existing reliability and economic criteria. The regional councils, RTOs, and ISOs identify needs. Others propose …

An aerial radiological survey of the Yucca Mountain Project (YMP) proposed land withdrawal was conducted from January to April 2006, and encompassed a total area of approximately 284 square miles (73,556 hectares). The aerial radiological survey was conducted to provide a sound technical basis and rigorous statistical approach for determining the potential presence of radiological contaminants in the Yucca Mountain proposed Land withdrawal area. The survey site included land areas currently managed by the Bureau of Land Management, the U.S. Air Force as part of the Nevada Test and Training Range or the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) as part of the Nevada Test Site (NTS). The survey was flown at an approximate ground speed of 70 knots (36 meters per second), at a nominal altitude of 150 ft (46 m) above ground level, along a set of parallel flight lines spaced 250 ft (76 m) apart. The flight lines were oriented in a north-south trajectory. The survey was conducted by the DOE NNSA/NSO Remote Sensing Laboratory-Nellis, which is located in Las Vegas, Nevada. The aerial survey was conducted at the request of the DOE Office of Civilian Radioactive Waste Management. The …

The purpose of this document is to offer information that could be used to compare and contrast sustainable building rating systems.

For long-lived intermediate-level radioactive waste, the useof concrete as engineering barrier and Callovian-Oxfordian clay asgeological barrier at a depth of 500 m is considered in the Frenchdisposal concept (ANDRA, 2005). Upon emplacement, initially unsaturatedconcrete is expected to experience coupled processes involving heating,re-saturation with groundwater from the clay formation, gas exchanges andgeochemical reactions. After an early period of re-saturation, solutetransport is supposed to be diffusion-controlled because of the extremelylow permeability of the two media. These coupled processes may lead tochanges in the porosity of the concrete or clay barriers. In the presentpaper, a fully coupled Thermo-Hydro-Chemical (THC) response of atwo-phase (gas and solution) mass-transfer model was evaluated and testedby a sensitivity analysis. This study is an extension of a previous modelapplied to an isothermal and fully saturated concrete/clay interface(Burnol et al., 2005); it investigated the coupled effect of temperatureand unsaturated conditions assuming no production of H2(g). The systemwas simulated for a 2000-year period, which covers the most predominantthermal perturbation.

A summary is given of presentations and discussions in theLaser-Plasma Acceleration Working Group at the 2006 Advanced AcceleratorConcepts Workshop. Presentation highlights include: widespreadobservation of quasi-monoenergetic electrons; good agreement betweenmeasured and simulated beam properties; the first demonstration oflaser-plasma acceleration up to 1 GeV; single-shot visualization of laserwakefield structure; new methods for measuring<100 fs electronbunches; and new methods for "machining" laser-plasma acceleratorstructures. Discussion of future direction includes: developing a roadmapfor laser-plasma acceleration beyond 1 GeV; a debate over injection andguiding; benchmarking simulations with improved wake diagnostics;petawatt laser technology for future laser-plasmaaccelerators.

SUMMARY The U.S. Department of Energy (DOE) Hydropower Program is part of the Office of Wind and Hydropower Technologies, Office of Energy Efficiency and Renewable Energy. The Program's mission is to conduct research and development (R&D) that will increase the technical, societal, and environmental benefits of hydropower. The Department's Hydropower Program activities are conducted by its national laboratories: Idaho National Laboratory (INL) [formerly Idaho National Engineering and Environmental Laboratory], Oak Ridge National Laboratory (ORNL), Pacific Northwest National Laboratory (PNNL), and National Renewable Energy Laboratory (NREL), and by a number of industry, university, and federal research facilities. Programmatically, DOE Hydropower Program R&D activities are conducted in two areas: Technology Viability and Technology Application. The Technology Viability area has two components: (1) Advanced Hydropower Technology (Large Turbine Field Testing, Water Use Optimization, and Improved Mitigation Practices) and (2) Supporting Research and Testing (Environmental Performance Testing Methods, Computational and Physical Modeling, Instrumentation and Controls, and Environmental Analysis). The Technology Application area also has two components: (1) Systems Integration and Technology Acceptance (Hydro/Wind Integration, National Hydropower Collaborative, and Integration and Communications) and (2) Supporting Engineering and Analysis (Valuation Methods and Assessments and Characterization of Innovative Technology). This report describes the progress of the R&D …

This document defines a standardized screening protocol for use in developing iodine ''getters'' for placement in the proposed YMP-repository invert. The work was funded by the US Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM), Office of Science and Technology International (S&amp;T) during 2004-2005. First, the likely environmental conditions in the invert are reviewed as a basis for defining the thermal and geochemical regimes in which a getter must function. These considerations, then, served as the basis for laying out a hierarchy of materials screening tests (Table 1). An experimental design for carrying out these screening tests follows next. Finally, the latter half of the document develops methods for preparing test solutions with chemistries that relate to various aspects of the YMP-repository environment (or, at least to such representations as were available from program documents late in 2004). Throughout the document priority was given to defining procedures that would quickly screen out unpromising candidate materials with a minimum amount of labor. Hence, the proposed protocol relies on batch tests over relatively short times, and on a hierarchy of short pre-test conditioning steps. So as not to repeat the mistakes (and frustrations) encountered in the past (notably in …

The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) is a software application developed for performing a complete probabilistic risk assessment (PRA) using a personal computer (PC) running the Microsoft Windows? operating system. Herein information is provided on the principles used in the construction and operation of Version 6.0 and 7.0 of the SAPHIRE system. This report summarizes the fundamental mathematical concepts of sets and logic, fault trees, and probability. This volume then describes the algorithms used to construct a fault tree and to obtain the minimal cut sets. It gives the formulas used to obtain the probability of the top event from the minimal cut sets, and the formulas for probabilities that apply for various assumptions concerning reparability and mission time. It defines the measures of basic event importance that SAPHIRE can calculate. This volume gives an overview of uncertainty analysis using simple Monte Carlo sampling or Latin Hypercube sampling, and states the algorithms used by this program to generate random basic event probabilities from various distributions. Also covered are enhance capabilities such as seismic analysis, cut set "recovery," end state manipulation, and use of "compound events."

A concise look at the big picture of particle physics, including the status of the Standard Model, neutrinos, supersymmetry, extra dimensions and cosmology. Based upon the theoretical summary presented at the XLIst Rencontres de Moriond on Electroweak Interactions and Unified Theories, La Thuile, 11-18 March 2006.

A search for the Technicolor processes p{bar p} {yields} {rho}{sub T}{sup {+-}} {yields} W{sup {+-}}{pi}{sub T}{sup 0} {yields} {mu}{nu}b{bar b} and p{bar p} {yields} {rho}{sub T}{sup 0} {yields} W{sup {+-}}{pi}{sub T}{sup {+-}} {yields} {mu}{nu}b{bar c} is conducted at the D0 detector. Selection requirements are individually optimized for each of twenty mass hypotheses by means of a random grid search. No excess is seen in a 291 pb{sup -1} data set and 95% confidence level upper limits are set on the Technicolor production cross section. The mass combinations M{sub {rho}} = 195 GeV/c{sup 2}, M{sub {pi}} = 100 GeV/c{sup 2} and M{sub {rho}} = 200 GeV/c{sup 2}, M{sub {pi}} = 105 GeV/c{sup 2} are excluded for the choice of the Technicolor scale parameter M{sub V} = 500 GeV.

To help meet the nation’s energy needs, recycling of partially used nuclear fuel is required to close the nuclear fuel cycle, but implementing this step will require considerable investment. This report evaluates financing scenarios for integrating recycling facilities into the nuclear fuel cycle. A range of options from fully government owned to fully private owned were evaluated using DPL (Decision Programming Language 6.0), which can systematically optimize outcomes based on user-defined criteria (e.g., lowest lifecycle cost, lowest unit cost). This evaluation concludes that the lowest unit costs and lifetime costs are found for a fully government-owned financing strategy, due to government forgiveness of debt as sunk costs. However, this does not mean that the facilities should necessarily be constructed and operated by the government. The costs for hybrid combinations of public and private (commercial) financed options can compete under some circumstances with the costs of the government option. This analysis shows that commercial operations have potential to be economical, but there is presently no incentive for private industry involvement. The Nuclear Waste Policy Act (NWPA) currently establishes government ownership of partially used commercial nuclear fuel. In addition, the recently announced Global Nuclear Energy Partnership (GNEP) suggests fuels from several countries …

We apply experimental-mathematical principles to analyzecertain integrals relevant to the Ising theory of solid-state physics. Wefind representations of the these integrals in terms of MeijerG-functions and nested-Barnes integrals. Our investigations began bycomputing 500-digit numerical values of Cn,k,namely a 2-D array of Isingintegrals for all integers n, k where n is in [2,12]and k is in [0,25].We found that some Cn,k enjoy exact evaluations involving DirichletL-functions or the Riemann zeta function. In theprocess of analyzinghypergeometric representations, we found -- experimentally and strikingly-- that the Cn,k almost certainly satisfy certain inter-indicialrelations including discrete k-recursions. Using generating functions,differential theory, complex analysis, and Wilf-Zeilberger algorithms weare able to prove some central cases of these relations.

None

The primary objectives of this subcontract were to: address key near-term technical R&amp;D issues for continued improvement in thin-film PV products; continue process development for increased production capacity; pursue long-term R&amp;D contributing to progress toward the MYTP goals for 2020 to increase the conversion efficiency to 15% and reduce module manufacturing costs to less than $50/m2, thus enabling PV systems with a 30-year lifetime at an installed cost of under $2.00/W; and advance the understanding of the requirements needed to achieve better thin-film PV cell and module performance, greater reliability and market acceptance, and investigate materials systems and new devices that can improve the cost/performance ratio of future thin-film PV factories. The demonstrated and maintained high production yield is a major accomplishment supporting attractive cost projections for CIS. Process R&amp;D at successive levels of CIS production has led to the continued demonstration of the prerequisites for commitment to large-scale commercialization. Process and packaging R&amp;D during this and previous subcontracts has demonstrated the potential for further cost and performance improvements.

Experiments at the LOASIS laboratory of LBNL havedemonstrated production of 100 MeV to 1 GeV electron bunches with lowenergy spread and low divergence from laser wakefield acceleration. Theradiation pressure of a 10 TW laser pulse, guided over 10 diffractionranges by a few-mm long plasma density channel, was used to drive anintense plasma wave (wakefield), producing electron bunches with energieson the order of 100 MeV and acceleration gradients on the order of 100GV/m. Beam energy was increased from 100 MeV to 1 GeV by using a few-cmlong guiding channel at lower density, driven by a 40 TW laser,demonstrating the anticipated scaling to higher beam energies. Particlesimulations indicate that the low energy spread beams were produced fromself-trapped electrons through the interplay of trapping, loading, anddephasing. Other experiments and simulations are also underway to controlinjection of particles into the wake, and hence improve beam quality andstability further.

The exponential increase of genomic and metagenomic data,fueled in part by recent advancements in sequencing technology, aregreatly expanding our understanding of the phylogenetic diversity andmetabolic capacity present in the environment. Two of the centralchallenges that bioinformaticians and ecologists alike must face are thedesign of bioinformatic resources that facilitate the analysis of genomicand metagenomic data in a comparative context and the efficient captureand organization of the plethora of descriptive information required tousefully describe these data sets. In this commentary, we review threeinitiatives presented in the "new frontiers" session of the second SCOPEmeeting on Microbial Environmental Genomics (MicroEnGen-II, Shanghai,June 12-15, 2006). These are (1) the Integrated Microbial GenomesResources (IMG), (2) the Genomic Standards Consortium (GSC), and (3) theNatural Environment Research Council (NERC) Environmental BioinformaticsCentre (NEBC). These integrative bioinformatics and data managementinitiatives underscore the increasingly important role ecologists have toplay in the genomic (metagenomic) revolution.

Dissolved oxygen (DO) in rivers is a common environmental problem associated with hydropower projects. Approximately 40% of all FERC-licensed projects have requirements to monitor and/or mitigate downstream DO conditions. Most forms of mitigation for increasing DO in dam tailwaters are fairly expensive. One area of research of the Department of Energy's Hydropower Program is the development of advanced turbines that improve downstream water quality and have other environmental benefits. There is great interest in being able to predict the benefits of these modifications prior to committing to the cost of new equipment. In the case of turbine replacement or modification, there is a need for methods that allow us to accurately extrapolate the benefits derived from one or two turbines with better design to the replacement or modification of all turbines at a site. The main objective of our study was to demonstrate a modeling approach that integrates the effects of flow and water quality dynamics with fish bioenergetics to predict DO mitigation effectiveness over long river segments downstream of hydropower dams. We were particularly interested in demonstrating the incremental value of including a fish growth model as a measure of biological response. The models applied are a suite of …

N/A

As workforce development becomes more of a critical component for an expanding renewable energy economy, new training opportunities are on the increase for practitioners interested in either getting into the renewable energy trades or upgrading their professional skills. This paper will report on the new trends in training and show how the instruction has become more highly developed. In many cases, curricula are now designed to provide teaching that leads to defined workplace knowledge, skills, and abilities. Private and academic training programs are becoming accredited specifically to renewable energy standards. Community colleges and technical schools are responding to local jobs by offering more and more renewable energy trades courses. And classes are expanding from 3 to 5 day workshops to semester-long courses resulting in one-year certificate and two-year associate degree programs at Community Colleges.

N/A

N/A

None

N/A