We present results from experiments, numerical simulations, and analytic modeling that demonstrate enhanced radiation confinement of hohlraums made from cocktail materials. We summarize the results from several previous planar sample experiments that showed the potential promise of cocktails. We then discuss a series of more recent hohlraum experiments that attempted to demonstrate enhanced radiation confinement. Once we understood the importance of oxygen contamination in increasing the specific heat and wall losses of uranium-based cocktails, we implemented new manufacturing and handling techniques for cocktail hohlraums that led to our demonstration of a significant increase in radiation temperature (up to +7eV at 300 eV) compared to a pure Au hohlraum. This data agrees well with modeling and suggests we can expect an 18% reduction in wall loss (and 10% reduction in laser energy) for the current ignition design by switching to cocktail hohlraums.

The nature of dark matter has been a mystery for over 70 years. One plausible candidate is the axion, an extremely light and weakly interacting particle, which results from the Peccei-Quinn solution to the strong CP problem. In this proceedings I will briefly review the evidence for dark matter as well as the motivation for the existence of the axion as a prime dark matter candidate. I will then discuss the experimental methods to search for axion dark matter focusing on a sensitive cavity experiment (ADMX) being run at Lawrence Livermore National Laboratory.

Although bulk silicon is not susceptible to fatigue,micron-scale silicon is. Several mechanisms have been proposed to explainthis surprising behavior although the issue remains contentious. Here wedescribe published fatigue results for micron-scale thin siliconfilms andfind that in general they display similar trends, in that lower cyclicstresses result in larger number of cycles to failure in stress-lifetimedata. We further show that one of two classes of mechanisms is invariablyproposed to explain the phenomenon. The first class attributes fatigue toa surface effect caused by subcritical (stable) cracking in thesilicon-oxide layer, e.g., reaction-layer fatigue; the second classproposes that subcritical cracking in the silicon itself is the cause offatigue in Si films. It is our contention that results to date fromsingle and poly crystalline silicon fatigue studies provide no convincingexperimentalevidence to support subcritical cracking in the silicon.Conversely, the reaction-layer mechanism is consistent with existingexperimental results, and moreover provides a rational explanation forthe marked difference in fatigue behavior of bulk and micron-scalesilicon.

Hundred-joule, kilowatt-class lasers based on diode-pumped solid-state technologies, are being developed worldwide for laser-plasma interactions and as prototypes for fusion energy drivers. The goal of the Mercury Laser Project is to develop key technologies within an architectural framework that demonstrates basic building blocks for scaling to larger multi-kilojoule systems for inertial fusion energy (IFE) applications. Mercury has requirements that include: scalability to IFE beamlines, 10 Hz repetition rate, high efficiency, and 10{sup 9} shot reliability. The Mercury laser has operated continuously for several hours at 55 J and 10 Hz with fourteen 4 x 6 cm{sup 2} ytterbium doped strontium fluoroapatite (Yb:S-FAP) amplifier slabs pumped by eight 100 kW diode arrays. The 1047 nm fundamental wavelength was converted to 523 nm at 160 W average power with 73% conversion efficiency using yttrium calcium oxy-borate (YCOB).

It is almost a decade since the first tabletop x-ray laser experiments were implemented at the Lawrence Livermore National Laboratory (LLNL). The decision to pursue the picosecond-driven schemes at LLNL was largely based around the early demonstration of the tabletop Ne-like Ti x-ray laser at the Max Born Institute (MBI) as well as the established robustness of collisional excitation schemes. These picosecond x-ray lasers have been a strong growth area for x-ray laser research. Rapid progress in source development and characterization has achieved ultrahigh peak brightness rivaling the previous activities on the larger facilities. Various picosecond soft-x-ray based applications have benefited from the increased repetition rates. We will describe the activities at LLNL in this area.

Article about the Help Clifford Help Kids gala and concert held at Austin Music Hall on November 2, 2006.

Studies have shown that grain boundary chromium carbides improve the stress corrosion cracking (SCC) resistance of nickel based alloys exposed to high temperature, high purity water. However, thermal cycles from welding can significantly alter the microstructure of the base material near the fusion line. In particular, the heat of welding can solutionize grain boundary carbides and produce locally high residual stresses and strains, reducing the SCC resistance of the Alloy 600 type material in the heat affected zone (HAZ). Testing has shown that the SCC growth rate in Alloy 600 heat affected zone samples can be {approx}30x faster than observed in the Alloy 600 base material under identical testing conditions due to fewer intergranular chromium rich carbides and increased plastic strain in the HAZ [1, 2]. Stress corrosion crack initiation tests were conducted on Alloy 600 HAZ samples at 360 C in hydrogenated, deaerated water to determine if these microstructural differences significantly affect the SCC initiation resistance of Alloy 600 heat affected zones compared to the Alloy 600 base material. Alloy 600 to EN82H to Alloy 600 heat-affected-zone (HAZ) specimens where fabricated from an Alloy 600 to Alloy 600 narrow groove weld with EN82H filler metal. The approximate middle third …

Ultra-refined microstructures of both tantalum (Ta) and vanadium (V) are produced using electron-beam evaporation and magnetron sputtering deposition. The thermal stability of the micron-to-submicron grain size foils is examined to quantify the kinetics and activation energy of diffusion, as well as identify the temperature transition in dominant mechanism from grain boundary to lattice diffusion. The activation energies for boundary diffusion in Ta and V determined from grain growth are 0.3 and 0.2 eV{center_dot}atom{sup -1}, respectively, versus lattice diffusion values of 4.3 and 3.2 eV{center_dot}atom{sup -1}, respectively. The mechanical behavior, as characterized by strength and hardness, is found to inversely scale with square-root grain size according to the Hall-Petch relationship. The strength of Ta and V increases two-fold from 400 MPa, as the grain size decreases from 2 to 0.75 {micro}m.

Since Merrifield introduced the concept of solid phase synthesis in 1963 for the rapid preparation of peptides, a large variety of different supports and resin-linkers have been developed that improve the efficiency of peptide assembly and expand the myriad of synthetically feasible peptides. The aryl hydrazide is one of the most useful resin-linkers for the synthesis of chemically modified peptides. This linker is completely stable during Boc- and Fmoc-based solid phase synthesis and yet it can be cleaved under very mild oxidative conditions. The present article reviews the use of this valuable linker for the rapid and efficient synthesis of C-terminal modified peptides, head-to-tail cyclic peptides and lipidated peptides.