Due to the large b{bar b} cross section at 1.96 TeV p - {bar p} collisions, the Tevatron is currently the most copious source of B hadrons. Recent detector upgrades for Run II have made these more accessible, allowing for a wide range of B and C/P physics with B hadrons of all flavours. In this paper we present B-physics results, and, using the versatile hadronic Two Track Trigger, a search for {Xi}(1860), from up to 240 pb{sup -1} of data.

This report contains the appendix to the PNNL report, Methodological Framework for Analysis of Buildings-Related Programs: The GPRA Metrics Effort.

An alignment frame is developed to support 3 Beam Position Monitors (BPM's) for detecting and ultimately aligning the electron beam from a linear accelerator. This report discusses the design details, preliminary modal analysis of the alignment frame as well as the addition of a metrology frame in the final phase of development.

Detailed and global models are presented for thermodynamically inhibited nucleation-growth reactions and applied to the {beta}-{delta} Phase Transition of HMX (nitramine octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine). The detailed model contains separate kinetic parameters for the nucleation process, including an activation energy distribution resulting from a distribution of defect energies, and for movement of the resulting reaction interface within a single particle. A thermodynamic inhibition term is added to both processes so that the rates go to zero at the transition temperature. The global model adds the thermodynamic inhibition term to the extended Prout-Tompkins nucleation-growth formalism for single particles or powders. Model parameters are calibrated from differential scanning calorimetry data. The activation energy for nucleation (333 kJ/mol) is substantially higher than that for growth (29.3 kJ/mol). Use of a small activation energy distribution ({approx}400 J/mol) for the defects improves the fit to a powered sample for both the early and late stages of the transition. The effective overall activation energy for the global model (208.8 kJ/mol) is in between that of nucleation and growth. Comparison of the two models with experiment indicates the thermodynamic inhibition term is more important than the energy distribution feature for this transition. Based on the applicability of the Prout-Tompkins kinetics …

We present evidence for an isostructural, first-order Mott transition in MnO at 105 {+-} 5 GPa, based on high-resolution x-ray emission spectroscopy and angle-resolved x-ray diffraction data. The pressure-induced structural/spectral changes provide a coherent picture of MnO phase transitions from paramagnetic B1 to antiferromagnetic distorted B1 at 30 GPa, to paramagnetic B8 at 90 GPa, and to diamagnetic B8 at 105 {+-} 5 GPa. The last is the Mott transition, accompanied by a complete loss of magnetic moment, an {approx}6.6% volume collapse and a visual appearance change to metallic luster consistent with recent resistivity measurements.

Microbiology is undergoing a quiet revolution. Techniques such as polymerase chain reaction, high throughput DNA sequencing, whole genome shotgun sequencing, DNA microarrays, and bioinformatics analyses are greatly aiding our understanding of the estimated one billion species of microbes that inhabit the Earth. Unfortunately, the rapid pace of research in microbiology stands in contrast to the much slower pace of change in educational reform. Biological Sciences Curriculum Study (BSCS) hosted a two-day planning meeting to discuss whether or not a new curriculum unit on microbiology is desirable for the high school audience. Attending the meeting were microbiologists, high school biology teachers, and science educators. The consensus of the participants was that an inquiry-based unit dealing with advances in microbiology should be developed for a high school biology audience. Participants established content priorities for the unit, discussed the unit's conceptual flow, brainstormed potential student activities, and discussed the role of educational technology for the unit. As a result of the planning meeting discussions, BSCS staff sought additional funding to develop, disseminate, and evaluate the Frontiers in Microbiology curriculum unit. This unit was intended to be developed as a replacement unit suitable for an introductory biology course. The unit would feature inquiry-based student …

The Joint Urban 2003 Experiment (JU2003) was conducted in Oklahoma City, Oklahoma during the summer of 2003. This extensive field experiment included over a hundred scientists measuring airflow, tracer concentration, and other variables pertinent to urban dispersion. A description of JU2003 can be found at this website: http://ju2003.pnl.gov/.

A wavelet-neural network signal processing method has demonstrated approximately tenfold improvement in the detection limit of various nitrogen and phosphorus compounds over traditional signal-processing methods in analyzing the output of a thermionic detector attached to the output of a gas chromatograph. A blind test was conducted to validate the lower detection limit. All fourteen of the compound spikes were detected when above the estimated threshold, including all three within a factor of two above. In addition, two of six were detected at levels 1/2 the concentration of the nominal threshold. We would have had another two correct hits if we had allowed human intervention to examine the processed data. One apparent false positive in five nulls was traced to a solvent impurity, whose presence was identified by running a solvent aliquot evaporated to 1% residual volume, while the other four nulls were properly classified. We view this signal processing method as broadly applicable in analytical chemistry, and we advocate that advanced signal processing methods be applied as directly as possible to the raw detector output so that less discriminating preprocessing and post-processing does not throw away valuable signal.

Our research focused on (1) microbial reduction of Fe(III) and U(VI) individually, and concomitantly in natural sediments, (2) Fe(III) oxide surface chemistry, specifically with respect to reactions with Fe(II)and U(VI), (3) the influence of humic substances on Fe(III) and U(VI) bioreduction, and on U(VI) complexation, and (4) the development of reaction-based reactive transport biogeochemical models to numerically simulate our experimental results. We have continued our investigations on microbial reduction of Fe(III) oxides. Modeling our earlier experimental results required assumption of a hydrated surface for hematite, more reactive than predicted based on theoretical solubility (Burgos et al.2002). Subsequent studies with Shewanella putrefaciens and Geobacter sulfurreducens confirmed the rates of Fe(III) bioreduction depend on oxide surface area rather than oxide thermodynamic properties (Roden,2003a,b;2004; Burgos et al,2003). We examined the potential for bioreduction of U(VI) by Geobacter sulfurreducens in the presence of synthetic Fe(III) oxides and natural Fe(III) oxide-containing solids (Jeon et al,2004a,b) in which more than 95% of added U(VI) was sorbed to mineral surfaces. The results showed a significant portion of solid-associated U(VI) was resistant to both enzymatic and abiotic (Fe(II)-driven) reduction, but the rate and extent of bioreduction of U(VI) was increased due to the addition of anthraquinone-2,6-disulfonate (AQDS). We …

Batteries with various types of chemistries are typically sold in rigid hermetically sealed containers that, at the simplest level, must contain the electrolyte while keeping out the exterior atmosphere. However, such rigid containers can have limitations in packaging situations where the form of the battery is important, such as in hand-held electronics like personal digital assistants (PDAs), laptops, and cell phones. Other limitations exist as well. At least one of the electrode leads must be insulated from the metal can, which necessitates the inclusion of an insulated metal feed-through in the containment hardware. Another limitation may be in hardware and assembly cost, such as exists for the lithium-ion batteries that are being developed for use in electric vehicles (EVs) and hybrid electric vehicles (HEVs). The large size (typically 10-100 Ah) of these batteries usually results in electric beam or laser welding of the metal cap to the metal can. The non-aqueous electrolyte used in these batteries are usually based on flammable solvents and therefore require the incorporation of a safety rupture vent to relieve pressure in the event of overcharging or overheating. Both of these features add cost to the battery. Flexible packaging provides an alternative to the rigid container. …

The requirements of the Government Performance and Results Act (GPRA) of 1993 mandate the reporting of outcomes expected to result from programs of the Federal government. The U.S. Department of Energy’s (DOE’s) Office of Energy Efficiency and Renewable Energy (EERE) develops official metrics for its 11 major programs using its Office of Planning, Budget Formulation, and Analysis (OPBFA). OPBFA conducts an annual integrated modeling analysis to produce estimates of the energy, environmental, and financial benefits expected from EERE’s budget request. Two of EERE’s major programs include the Building Technologies Program (BT) and Office of Weatherization and Intergovernmental Program (WIP). Pacific Northwest National Laboratory (PNNL) supports the OPBFA effort by developing the program characterizations and other market information affecting these programs that is necessary to provide input to the EERE integrated modeling analysis. Throughout the report we refer to these programs as “buildings-related” programs, because the approach is not limited in application to BT or WIP. To adequately support OPBFA in the development of official GPRA metrics, PNNL communicates with the various activities and projects in BT and WIP to determine how best to characterize their activities planned for the upcoming budget request. PNNL then analyzes these projects to determine what …

This 2-day conference is designed to bring scientist working in nuclear medicine, as well as nuclear medicine practitioners together to discuss the advances in four selected areas of imaging: Biochemical Parameters using Small Animal Imaging, Developments in Small Animal PET Imaging, Cell Labeling, and Imaging Angiogenesis Using Multiple Modality. The presentations will be on molecular imaging applications at the forefront of research, up to date on the status of molecular imaging in nuclear medicine as well as in related imaging areas. Experts will discuss the basic science of imaging techniques, and scheduled participants will engage in an exciting program that emphasizes the current status of molecular imaging as well as the role of DOE funded research in this area.

The technical challenges and motivations for high-energy, short-pulse generation with NIF-class, Nd:glass laser systems are reviewed. High energy short pulse generation (multi-kilojoule, picosecond pulses) will be possible via the adaptation of chirped pulse amplification laser techniques on the NIF. Development of meter-scale, high efficiency, high-damage-threshold final optics is a key technical challenge. In addition, deployment of HEPW pulses on NIF is constrained by existing laser infrastructure and requires new, compact compressor designs and short-pulse, fiber-based, seed-laser systems. The key motivations for high energy petawatt pulses on NIF is briefly outlined and includes high-energy, x-ray radiography, proton beam radiography, proton isochoric heating and tests of the fast ignitor concept for inertial confinement fusion.

The Department of Energy (DOE) is sponsoring an initiative to facilitate efficient, effective and responsible use of Monitored Natural Attenuation (MNA) and Enhanced Passive Remediation (EPR) for chlorinated solvents. This Office of Environmental Management (EM) ''Alternative Project,'' focuses on providing scientific and policy support for MNA/EPR. A broadly representative working group of scientists supports the project along with partnerships with regulatory organizations such as the Interstate Technology and Regulatory Council and the U.S. Environmental Protection Agency (EPA). The initial product of the technical working group was a summary report that articulated the conceptual approach and central scientific tenants of the project, and that identified a prioritized listing of technical targets for field research. This report documented the process in which: (1) scientific ground rules were developed, (2) lines of inquiry were identified and then critically evaluated, (3) promising applied research topics were highlighted in the various lines of inquiry, and (4) these were discussed and prioritized. The summary report will serve as a resource to guide management and decision-making throughout the period of the subject MNA/EPR Alternative Project. To support and more fully document the information presented in the summary report, we are publishing a series of supplemental documents that …

An important parameter in the numerical simulation of atmospheric boundary layers is the dissipation length scale, l{sub {var_epsilon}}. It is especially important in weakly to moderately stable conditions, in which a tenuous balance between shear production of turbulence, buoyant destruction of turbulence, and turbulent dissipation is maintained. In large-scale models, the dissipation rate is often parameterized using a diagnostic equation based on the production of turbulent kinetic energy (TKE) and an estimate of the dissipation length scale. Proper parameterization of the dissipation length scale from experimental data requires accurate estimation of the rate of dissipation of TKE from experimental data. Using data from the MICROFRONTS and CASES-99 field programs, we evaluate turbulent kinetic energy (TKE), TKE dissipation rate {var_epsilon}, and dissipation length l{sub {var_epsilon}} over a range of stability regimes represented by a stable boundary layer (SBL), a destabilizing intrusion (by first a cold front and second a density current) and recovery. These data may be utilized to test recent parameterizations of dissipation rate {var_epsilon} and l{sub {var_epsilon}} in order to determine the suitability of these models for inclusion in mesoscale models for numerical weather prediction or pollution dispersion prediction.

Shock refraction is a fundamental shock phenomenon observed when shocks interact with a material interface separating gases with different properties. Following refraction, a transmitted shock enters the second gas and a reflected wave returns back into the first gas. In the case of regular shock refraction all waves meet at a single point called the triple-point, creating five different states for the two gases. Analytical methods based on shock polar analysis [9, 16] have been developed to determine the state of two ideal gases in each of the five refraction regions. Furthermore, shock refraction constitutes a basic example of complex hydrodynamic flows. For this reason, shock refraction is used in this report as one validation of the high-order accurate weighted essentially non-oscillatory (WENO) shock-capturing method, as implemented in the HOPE code. The following two-step validation process is adopted. First, analytical results are obtained for the normal and oblique shock refraction (with shock-interface angle {beta}{sub int} = 75) observed for a Ma = 1.2 shock. To validate the single-fluid and the two-fluid implementations of the WENO method, two pairs of gases, argon/xenon, having equal adiabatic exponents {gamma} and air(acetone)/sulfur hexafluoride, having different adiabatic exponents {gamma}, are considered. Both the light-to-heavy and …

Maximizing the conversion efficiency (CE) of laser energy into multi-keV x-rays is a general concern to many areas of high-energy-density plasma physics. Bright x-ray sources are needed for backlighters in order to radiograph targets in inertial-confinement fusion (ICF) experiments. As the targets get larger, and as compression in the targets increases, the backlighter sources need to be brighter and the backlighter-photon energies must increase. To this end, for a given laser power, backlighters can become brighter by becoming more efficient at converting the drive beams to multi-keV x-rays. Volumetric heating of low-density gas targets has been shown to be a very efficient method of producing x-rays. Recently, laser heating of an underdense aerogel target has demonstrated efficient x-ray production. Ongoing experiments are optimizing these designs; this paper reports on detailed calculations of the x-ray yield from L-shell Kr in laser-heated targets.