Daily newspaper from Altus, Oklahoma that includes local, state, and national news along with advertising.

The National Museum of the Pacific War presents an oral interview with Felix “George” Appleton. Appleton was born in Lawrenceburg, Tennessee, 21 July 1924. He enlisted in the US Navy in 1943 and following boot camp, entered the hospital corps school. Later he went aboard USS LST-523 and sailed in convoy to England and witnessed submarine attacks and a number of ships being lost. He tells of participating in Operation Overlord with Omaha Beach being USS LST-523’s objective. He describes the carnage he witnessed both in the water and on the beach. After off-loading supplies, the ship was designated a hospital ship and he describes the various combat injuries he treated. The ship made numerous trips between England and the Normandy beaches until the ship struck a mine and sank. Numerous fatalities occurred among the doctors and medical staff. He was treated for minor wounds and ultimately returned to the United States on HMS Queen Elizabeth. He was assigned to the Lambert Naval Air Station at St. Louis, Missouri until his discharge in 1946.

The National Museum of the Pacific War presents an oral interview with Felix “George” Appleton. Appleton was born in Lawrenceburg, Tennessee, 21 July 1924. He enlisted in the US Navy in 1943 and following boot camp, entered the hospital corps school. Later he went aboard USS LST-523 and sailed in convoy to England and witnessed submarine attacks and a number of ships being lost. He tells of participating in Operation Overlord with Omaha Beach being USS LST-523’s objective. He describes the carnage he witnessed both in the water and on the beach. After off-loading supplies, the ship was designated a hospital ship and he describes the various combat injuries he treated. The ship made numerous trips between England and the Normandy beaches until the ship struck a mine and sank. Numerous fatalities occurred among the doctors and medical staff. He was treated for minor wounds and ultimately returned to the United States on HMS Queen Elizabeth. He was assigned to the Lambert Naval Air Station at St. Louis, Missouri until his discharge in 1946.

An experimental procedure is reported to perform shear tests on specimens held under moderately high hydrostatic pressures (on the order of 10 GPa). The mechanical behavior of materials subjected to such pressures, varies substantially from that observed at atmospheric pressure or even pressures typically attained during industrial processing. These differences must be incorporated into models such as the Steinberg-Guinan hardening model or discrete dislocation dynamics simulations. The goal of the proposed research is to develop and implement testing procedures that experimentally determine pressure-dependent dislocation mobilities in oriented single crystals of the BCC transition metals. These experiments will provide calibration data for models of materials subjected to extreme pressures and will assist in model validation. This paper reports the development of the experimental procedures. A thin foil of polycrystalline Ta was used to perform the initial experiments under hydrostatic pressures ranging from 2.1 to 4.2 GPa. Both yielding and hardening behavior are observed to be sensitive to the imposed pressure.

Daily newspaper from Sapulpa, Oklahoma that includes local, state, and national news along with advertising.

Daily newspaper from Perry, Oklahoma that includes local, state, and national news along with advertising.

None

Accelerator mass spectrometry (AMS) provides precise quantitation of isotope labeled compounds that are bound to biological macromolecules such as DNA or proteins. The sensitivity is high enough to allow for sub-pharmacological (''micro-'') dosing to determine macromolecular targets without inducing toxicities or altering the system under study, whether it is healthy or diseased. We demonstrated an application of AMS in quantifying the physiologic effects of one dosed chemical compound upon the binding level of another compound in vivo at sub-toxic doses [4].We are using tissues left from this study to develop protocols for quantifying specific binding to isolated and identified proteins. We also developed a new technique to quantify nanogram to milligram amounts of isolated protein at precisions that are comparable to those for quantifying the bound compound by AMS.

Daily newspaper from Chickasha, Oklahoma that includes local, state, and national news along with advertising.

Semiweekly newspaper from Boerne, Texas that includes local, state, and national news along with advertising.

Daily newspaper from Baytown, Texas that includes local, state, and national news along with advertising.

Performance requirements and testing protocols are needed to ensure that equipment used by the International Atomic Energy Agency (IAEA) is reliable. Oak Ridge National Laboratory (ORNL), through the US Support Program, tested equipment to validate performance requirements protocols used by the IAEA for the subject equipment categories. Performance protocol validation tests were performed in the Environmental Effects Laboratory in the categories for battery, DC power supply, and uninterruptible power supply (UPS). Specific test results for each piece of equipment used in the validation process are included in this report.

At this morning's fill-tube surrogate working group meeting we tentatively decided on a single bump on a shell for the single March shot. This memo shows the calculations needed as background to fabricate such a bump by depositing an appropriate sized drop of polystyrene solution (i.e. the glue) to a shell as discussed in this mornings meeting. While writing this I had another idea for fabricating a bump, which I quickly outlined at the end of this memo. I am distributing this calculation primarily so that group members can quickly check the calculations and ideas and if without error to provide a framework for initial fabrication efforts.

The purpose of this Model Report is to document the Seepage Calibration Model (SCM). The SCM is developed (1) to establish the conceptual basis for the Seepage Model for Performance Assessment (SMPA), and (2) to derive seepage-relevant, model-related parameters and their distributions for use in the SMPA and seepage abstraction in support of the Total System Performance Assessment for License Application (TSPA-LA). The SCM is intended to be used only within this Model Report for the estimation of seepage-relevant parameters through calibration of the model against seepage-rate data from liquid-release tests performed in several niches along the Exploratory Studies Facility (ESF) Main Drift and in the Cross Drift. The SCM does not predict seepage into waste emplacement drifts under thermal or ambient conditions. Seepage predictions for waste emplacement drifts under ambient conditions will be performed with the SMPA (see upcoming REV 02 of CRWMS M&O 2000 [153314]), which inherits the conceptual basis and model-related parameters from the SCM. Seepage during the thermal period is examined separately in the Thermal Hydrologic (TH) Seepage Model (see BSC 2003 [161530]). The scope of this work is (1) to evaluate seepage rates measured during liquid-release experiments performed in several niches in the Exploratory Studies …

In-situ Time Resolved X-Ray Diffraction (TRXRD) experiments were performed during stationary gas tungsten arc (GTA) welding of AISI 1045 C-Mn steel. These synchrotron-based experiments tracked, in real time, phase transformations in the heat-affected zone of the weld under rapid heating and cooling conditions. The diffraction patterns were recorded at 100 ms intervals, and were later analyzed using diffraction peak profile analysis to determine the relative fraction of ferrite ({alpha}) and austenite ({gamma}) phases in each diffraction pattern. Lattice parameters and diffraction peak widths were also measured throughout the heating and cooling cycle of the weld, providing additional information about the phases that were formed. The experimental results were coupled with a thermofluid weld model to calculate the weld temperatures, allowing time-temperature transformation kinetics of the {alpha} {yields} {gamma} phase transformation to be evaluated. During heating, complete austenitization was observed in the heat affected zone of the weld and the kinetics of the {alpha} {yields} {gamma} phase transformation were modeled using a Johnson-Mehl-Avrami (JMA) approach. The results from the 1045 steel weld were compared to those of a 1005 low carbon steel from a previous study. Differences in austenitization rates of the two steels were attributed to differences in the base …

Real-time three-dimensional (3D) reconstruction of epithelial structures in human mammary gland tissue blocks mapped with selected markers would be an extremely helpful tool for breast cancer diagnosis and treatment planning. Besides its clear clinical application, this tool could also shed a great deal of light on the molecular basis of breast cancer initiation and progression. In this paper we present a framework for real-time segmentation of epithelial structures in two-dimensional (2D) images of sections of normal and neoplastic mammary gland tissue blocks. Complete 3D rendering of the tissue can then be done by surface rendering of the structures detected in consecutive sections of the blocks. Paraffin embedded or frozen tissue blocks are first sliced, and sections are stained with Hematoxylin and Eosin. The sections are then imaged using conventional bright field microscopy and their background is corrected using a phantom image. We then use the Fast-Marching algorithm to roughly extract the contours of the different morphological structures in the images. The result is then refined with the Level-Set method which converges to an accurate (sub-pixel) solution for the segmentation problem. Finally, our system stacks together the 2D results obtained in order to reconstruct a 3D representation of the entire tissue …

This report discusses bundling and public policy issues for Congress. The federal Universal Service Fund - the federal subsidy program that assures affordable telephone rates for high-cost (rural) and low-income telephone customers as well as for schools, libraries, and rural health facilities - is supported by an assessment on interstate telecommunications revenues only. But it is difficult to identify the portion of revenues generated by a bundled service offering attributable to the interstate telecommunications portion of that bundle.

Semiweekly newspaper from Sealy, Texas that includes local, state, and national news along with advertising.

None

Weekly newspaper from Emory, Texas that includes local, state, and national news along with advertising.

The National Museum of the Pacific War presents an oral interview with Jack Horner. Horner finished high school and immediately joined the Navy in 1944. After training, he was assigned as a Yeoman at Honolulu before joining the crew of USS Nashville (CL-43) in October, 1944. He was in the Philippines when the war ended.

The National Museum of the Pacific War presents an oral interview with Jack Horner. Horner finished high school and immediately joined the Navy in 1944. After training, he was assigned as a Yeoman at Honolulu before joining the crew of USS Nashville (CL-43) in October, 1944. He was in the Philippines when the war ended.

Inorganic membrane reactors offer the possibility of combining reaction and separation in a single operation at high temperatures to overcome the equilibrium limitations experienced in conventional reactor configurations. Such attractive features can be advantageously utilized in a number of potential commercial opportunities, which include dehydrogenation, hydrogenation, oxidative dehydrogenation, oxidation and catalytic decomposition reactions. However, to be cost effective, significant technological advances and improvements will be required to solve several key issues which include: (a) permselective thin solid film, (b) thermal, chemical and mechanical stability of the film at high temperatures, and (c) reactor engineering and module development in relation to the development of effective seals at high temperature and high pressure. In this project, we are working on the development and application of palladium and palladium-silver alloy thin-film composite membranes in membrane reactor-separator configuration for simultaneous production and separation of hydrogen and carbon dioxide at high temperature. From our research on Pd-composite membrane, we have demonstrated that the new membrane has significantly higher hydrogen flux with very high perm-selectivity than any of the membranes commercially available. The steam reforming of methane by equilibrium shift in Pd-composite membrane reactor is being studied to demonstrate the potential application of this new development. …

The Conservation Security Program (CSP), a new program enacted in section 2001 of the 2002 farm bill (P.L. 107-171) and administered by the Natural Resources Conservation Service, creates a three-tiered system rewarding increased levels of conservation on agricultural operations with increased payments. Payments include a base payment for acreage enrolled, a payment for new or existing conservation practices, and an “enhancement” payment for conservation exceeding minimum program standards.