This report discussed progress made during the second year of a two-year study on the feasibility of using copper or a copper-base alloy as a container material for a waste package in a potential repository in tuff rock at the Yucca Mountain site in Nevada. Corrosion testing in potentially corrosive irradiated environments received emphasis during the feasibility study. Results of experiments to evaluate the effect of a radiation field on the uniform corrosion rate of the copper-base materials in repository-relevant aqueous environments are given as well as results of an electrochemical study of the copper-base materials in normal and concentrated J-13 water. Results of tests on the irradiation of J-13 water and on the subsequent formation of hydrogen peroxide are given. A theoretical study was initiated to predict the long-term corrosion behavior of copper in the repository. Tests were conducted to determine whether copper would adversely affect release rates of radionuclides to the environment because of degradation of the Zircaloy cladding. A manufacturing survey to determine the feasibility of producing copper containers utilizing existing equipment and processes was completed. The cost and availability of copper was also evaluated and predicted to the year 2000. Results of this feasibility assessment are …

Current plans propose placing subsurface markers within protective barriers to deter potential human intrusion into disposed radioactive wastes. The subsurface markers would provide warning to the digging intruder should surface markers be removed, destroyed, or ignored. This plan sets forth procedures for testing the survivability of the subsurface markers during construction of the barrier. After the tests described herein are concluded, a decision can be made as to whether subsurface markers will require protection during barrier construction. If protection is required, additional tests will be needed to test the effectiveness of various protective approaches.

Shock waves amplify pre-existing turbulence. Shock tube and shock wave boundary layer interaction experiments provide qualitative confirmation. However, shock pressure, temperature, and rapid transit complicate direct measurement. Computational simulations supplement the experimental data base and help isolate the mechanisms responsible. Simulations and experiments, particularly under reflected shock wave conditions, significantly influence material mixing. In these pseudospectral Navier-Stokes simulations the shock wave is treated as either a moving (tracked or fitted) domain boundary. The simulations assist development of code mix models. Shock Mach number and pre-existing turbulence intensity initially emerge as key parameters. 20 refs., 8 figs.

Traditional methods of magnet construction (wet winding) use molded coil subassemblies bonded together with epoxy impregnated fiberglass tape. This is a highly labor intensive process involving redundant operations for each of the four coils. The epoxy free winding technique (dry winding) eliminates the epoxy curing steps and also allows all four coils to be wound on 3 common winding mandrel, thereby reducing winding stations and handling. The tooling required for dry winding is a radical departure from existing technology imposing new mechanical problems. A number of 64 cm long 5 cm aperture SSC Design B'' magnets have been produced at Fermilab utilizing dry winding techniques. Discussed is the specialized tooling created to accomplish dry winding as well as new winding and assembly procedures required. Also discussed are mechanical problems encountered and their solutions. Based on experience gained, dry winding can be a viable lower cost alternative to traditional coil fabrication techniques.

A model has been constructed in which a small droplet is exploded by the absorption of energy from a high energy laser beam. The beam flux is so high that it is assumed that a plasma is formed. A single-fluid model of a plasma droplet interacting with laser radiation is used. Selfsimilarity is invoked to reduce the spherically symmetric problem involving hydrodynamics and Maxwell's equations to quadrature. It is shown analytically that the model reproduces in qualitative manner certain features observed experimentally.

The debate over the existence of a new particle postulated to explain the narrow positron spectra seen in heavy ion collisions has focused attention on a region of mass/lifetime where such a particle may exist and yet would not have been seen. To obtain the best possible sensitivity to elementary particles coupling to the electron in this unexplored region, we propose an electron beam dump experiment which will make parasitic use of the newly constructed wide band electron beam.

The flexibility of MFTF-B for axisymmetric experiments has been investigated. Interhcanging the axicell coils and increasing their separation results in an axisymmetric plug cell with 12:1 and 6:1 inner and outer mirror ratios, respectively. For axisymmetric operation, the sloshing-ion neutral beams, ECRH gyrotrons, and the pumping system would be moved to the axicell. Stabilization by E-rings could be explored in this configuration. With the addition of octopole magnets, off-axis multipole stabilization could also be tested. Operating points for octopole and E-ring-stabilized configurations with properties similar to those of the quadrupole MFTF-B, namely T/sub ic/ = 10 - 15 keV and n/sub c/ approx. = 3 x 10/sup 13/ cm/sup -3/, have been obtained. Because of the negligible radial transport of central-cell ions, the required neutral-beam power in the central cell has been dramatically reduced. In addition, because MHD stabilization is achieved by off-axis hot electrons in both cases, much lower barrier beta is possible, which aids in reducing the barrier ECRH power. Total ECRH power in the end cell is projected to be approx. =1 MW. Possible operating points for both octopole and E-ring configurations are described along with the stability considerations involved.

Today's satellite remote sensing systems rely heavily on spectral signatures for scene identification from nadir observations. We propose to use angular signatures as complementary scene identifiers when off-nadir sensing is possible. Specifically, the hot spot (Heiligenschein) of plant canopies is recognized as an atmosphere-invariant angular reflectance signature that carries information about the plant stand architecture which may be useful for instant crop identification from off-nadir satellite measurements.

Mirrors designed to survive exposure to damaging radiation are being irradiated and then measured to determine the mechanisms of failure and to improve the ability of analysis codes to predict an exposure damage threshold. The differences between survival and catastrophic failure are easily recognized and recorded by macro photography. However, the coal of this project is to quantify the onset of mirror degradation utilizing non contact methods that have good measurement sensitivity to small changes in reflectivity (material properties) and light scatter (roughness). A new angular resolved scatterometer is described that has an extended dynamic range and integrated analysis capable of displaying the surface power spectral density (PSD) over large bandwidths of surface spatial frequencies. Graphical displays of the scattered light power before and after exposure to the radiation are compared and integrated over equivalent spatial bandwidths of sensitivity for other instruments to compare calculated RMS roughness values.

The magnitude and temperature dependence of the quadrupole interaction at the /sup 111/Cd site in orthorhombic ..cap alpha..-uranium was investigated between 293 and 17 K. The parent activity /sup 111/In was implanted into uranium metal with an energy of 80 keV and the ..gamma..-..gamma.. TDPAC technique, applied to the 245 keV state in /sup 111/Cd, was used to measure the quadrupole interaction frequency. The derived electric field gradient for Cd in uranium was found to be highly asymmetric (eta = 1) and led to a quadrupole interaction frequency of /sub Q/ = 7.10(7) MHz at 293 K. The temperature dependence of the quadrupole interaction is very strong, /sub Q/ increases to 14.3(2) MHz at 17 K and shows a linear dependence on the temperature. 10 refs., 2 figs.

This report discusses research on the following magnetic mirror configurations: Racetrack; ECRH generated plasmas; RF generated plasmas; potential structures; surface multipole fields, and lamex; hot electron physics; axial loss processes; and RF induced effects.

This report discusses research on the following magnetic mirror configurations: Racetrack; ECRH generated plasmas; RF generated plasmas; potential structures; surface multipole fields, and lamex; hot electron physics; axial loss processes; and RF induced effects.

The parameters involved in generating actual radiographs and what can and cannot be modeled are examined in this report. Using the spectral distribution of the radiation source and the mass absorption curve for the material comprising the part to be modeled, the actual amount of radiation that would pass through the part and reach the film is determined. This method increases confidence in the results of the simulation and enables the modeling of parts made of multiple materials. (LEW)

During two periods in 1986 and 1987, oxygen ion beams with energies up to 3.2 TeV will be available at the CERN-SPS. A brief review of the five large heavy ion experiments is presented and the different physics addressed by each of the experiments is discussed. 11 refs., 5 figs.

The results obtained during the evolution of the design, construction, and testing program of the design ''B'' dipole are presented here. Design ''B'' is one of the original three competing designs for the Superconducting Super Collider ''SSC'' arc dipoles. The final design parameters were as follows: air cored (less than a few percent of the magnetic field derived from any iron present), aluminum collared, two layered winding, 5.5T maximum operating field, and a 5 cm cold aperture. There have been fourteen 64 cm long 5 cm aperture model dipoles cold tested (at 4.3K and less) in this program so far. There was a half length full size (6m) mechanical analog (M-10) built and tested to check the cryostat's mechanical design under ramping and quench conditions. Several deviations from the ''Tevatron'' dipole fabrication technique were incorporated, for example the use of aluminum collars instead of stainless steel. The winding technique variations explored were ''dry welding,'' a technique with the cable covered with Kapton insulation only and ''wet winding'' where the Kapton was covered with a light coat of ''B'' stage epoxy. Test data include quench currents, field quality (Fourier multipole co-efficients), coil magnetization, conductor current performance, and coil loading. Quench current, …

A standard method for calculating the total capital cost and the cost of electricity for a typical inertial confinement fusion electric power plant has been developed. A standard code of accounts at the two-digit level is given for the factors making up the total capital cost of the power plant. Equations are given for calculating the indirect capital costs, the project contingency, and the time-related costs. Expressions for calculating the fixed charge rate, which is necessary to determine the cost of electricity, are also described. Default parameters are given to define a reference case for comparative economic analyses.

In the Climax stock granite on the Nevada Test Site, eleven canisters of spent nuclear reactor fuel were emplaced, and six electrical simulators were energized. When test data indicated that the test objectives were met during the 3-year storage phase, the spent-fuel canisters were retrieved and the thermal sources were de-energized. The project demonstrated the feasibility of packaging, transporting, storing, and retrieving highly radioactive fuel assemblies in a safe and reliable manner. In addition to emplacement and retrieval operations, three exchanges of spent-fuel assemblies between the SFT-C and a surface storage facility, conducted during the storage phase, furthered this demonstration. The test led to development of a technical measurements program. To meet these objectives, nearly 1000 instruments and a computer-based data acquisition system were deployed. Geotechnical, seismological, and test status data were recorded on a continuing basis for the three-year storage phase and six-month monitored cool-down of the test. This report summarizes the engineering and scientific endeavors which led to successful design and execution of the test. The design, fabrication, and construction of all facilities and handling systems are discussed, in the context of test objectives and a safety assessment. The discussion progresses from site characterization and experiment design through …

As part of a long-term study of water quality patterns, scientists from the Academy of Natural Sciences have collected aquatic insects from artificial substrates placed at several stations in Savannah River. This report presents the first detailed compilation and analysis of this substantial data base, and examines patterns of variations of insect distribution and abundance (both spatial and temporal) during the last quarter century. Data on the number of individuals of various taxa found in the insect traps were obtained from tables in the Academy's cursory reports. Computer data files created from these records were subjected to extensive statistical analyses in order to examine variation among stations, seasons and years in the abundances of major taxa and various aggregate properties of the insect assemblage. Although a total of 83 taxa were collected over the 27-year study, 10 taxa accounted for nearly 80% of the individuals collected from the traps, hence there 10 taxa were analyzed more intensively.

As part of a long-term study of water quality patterns, scientists from the Academy of Natural Sciences have collected aquatic insects from artificial substrates placed at several stations in Savannah River. This report presents the first detailed compilation and analysis of this substantial data base, and examines patterns of variations of insect distribution and abundance (both spatial and temporal) during the last quarter century. Data on the number of individuals of various taxa found in the insect traps were obtained from tables in the Academy`s cursory reports. Computer data files created from these records were subjected to extensive statistical analyses in order to examine variation among stations, seasons and years in the abundances of major taxa and various aggregate properties of the insect assemblage. Although a total of 83 taxa were collected over the 27-year study, 10 taxa accounted for nearly 80% of the individuals collected from the traps, hence there 10 taxa were analyzed more intensively.

None

This report presents progress reported during the period, 7/1/86 - 9/30/86 for the Technical Support Services (TSS) for the Magnetic Fusion Reactor Design Studies Program. Tasks reported include: systems studies work plan, normalization of reactor design studies, interpretation of design study activities, research and development plan, conference support, and reports generated.

This study involves a concept developed by the Fairchild Space Company which is directly applicable to the Strategic Defense Initiative (SDI) Program as well as other national security programs requiring reliable, secure and survivable telecommunications systems. The overall objective of this study program was to determine the feasibility of combining and integrating long-lived, compact, autonomous isotope power sources with fiber optic and other types of ground segments of the SDI communications, command, control and intelligence/battle management (C/sup 3/I/BM) system in order to significantly enhance the survivability of those critical systems, especially against the potential threats of electromagnetic pulse(s) (EMP) resulting from high altitude nuclear weapon explosion(s). 28 figs., 2 tabs.

Project planning in the area of x-ray lithography is discussed. Three technologies that are emphasized are the light source, the lithographic technology, and masking technology. The needs of the semiconductor industry in the lithography area during the next decade are discussed, particularly as regards large scale production of high density dynamic random access memory devices. Storage ring parameters and an overall exposure tool for x-ray lithography are addressed. Competition in this area of technology from Germany and Japan is discussed briefly. The design of a storage ring is considered, including lattice design, magnets, and beam injection systems. (LEW)