High Performance Liquid Chromatography (HPLC) was used to investigate the utility of this technique for the analytical and preparative separation of components of aquatic fulvic acids (FA). Three modes of HPLC namely adsorption, anion exchange and reversed phase were evaluated. Aquatic fulvic acids were either extracted from surface water and sediment samples collected from the Southwest of the U.S., or were provided in a high purity form from the USGS. On the adsorption mode, a major fraction of aquatic fulvic acid was isolated on a semipreparative scale and subjected to Carbon-13 NMR and FAB Mass Spectroscopy. Results indicated that (1) The analyzed fraction of fulvic acid contains more aliphatic than aromatic moieties; (2) Methoxy, carboxylic acids, and esters are well-defined moieties of the macromolecule; (3) Phenolic components of the macromolecules were not detected in the Carbon-13 NMR spectrum possibly because of the presence of stable free radicals. Results of the anion exchange mode have shown that at least three types of acidic functionalities in aquatic fulvic acid can be separated. Results also indicated that aquatic fulvic acid can be progressively fractionated by using subsequent modes of HPLC. Results of reversed phase mode have shown that (1) The fractionation of aquatic …

The objective of this study was to explore intramolecular ketene cycloadditions with the anticipated results of developing new synthetic methodology for the synthesis of polycyclic compounds difficult to obtain by other procedures. (o-Alkenylphenoxy)ketenes were initially selected for this study because these ketenes provided a favorable proximity for the intramolecular [2+2] cycloaddition reactions. The difunctional precursors, (o-alkenylphenoxy)- acetic acids, were readily prepared from o-alkenylphenols and ∝-halocarboxylic acids and were converted to the corresponding acid chlorides by reaction with oxalyl chloride. The acid chlorides were dehydrochlorinated to the corresponding (o-alkenylphenoxy)ketenes by treatment with triethylamine. The ketenes undergo a facile intramolecular [2+2] cycloaddition to give polycyclic eye 1obutanones. The (o-vinylphenoxy)ketenes are clearly more reactive than the (o-allylphenoxy)ketenes and provide much better yields of the cycloaddition products because of electronic effects in the transition state in the cycloaddition process. The intramolecular [2+2] cycloadditions of keteniminium salts were included in this study as a more electrophilic alternative to ketenes that will react with less nucleophilic carbon-carbon double bonds. However, the use of keteniminium salts instead of ketenes in Intramolecular cycloadditions does have some limitations. The synthesis of benzofurans via the intramolecular [2+2] cycloadditions of (o-acylphenoxy)ketenes was accomplished. The initially formed ß-lactone cycloaddition products spontaneously underwent …

There are 150 million tons of Municipal Solid Waste (MSW) annually produced in the United States, which is approximately equivalent to 150 million barrels of oil. MSW production is inexhaustible, and is increasing on an annual per capita basis of approximately three per cent. After controlling the moisture and adding a binder, the combustible portion of MSW was converted to pellets. The objects of this project were to 1) evaluate the binder, 2) prepare the pellets, and 3) evaluate the pellets with regard to density. The manufacture of pellets was conducted at the Naval Air Station, Jacksonville, Florida. The evaluation of the binders and the pellets was done at North Texas State University (NTSU). There were three procedures for measuring the density. The first, using water displacement, was from the American Society for Testing and Material (ASTM). The second, using wax coating, was also from ASTM. The third, using sharply-cut cylindrical pellets, was developed at NTSU.

Ion chromatography (IC) as developed by Small et. al. in 1975 has become an efficient and reliable analytical technique for simultaneous analysis of multiple ions in solution. The principle requirement prior to use the IC for an analysis is sample preparation; these include sample decomposition, solvent extraction, and trapping in case the target element is in the gas phase, etc. Solvent extractions for fluoride, chloride, sodium, ammonium, and potassium ions which are soluble in soils are described. Sample decompositions include silicate rocks using hydrofluoric acid for the determination of phosphorus; organic pesticides using lithium fusion technique for the determination of halide and cyanide ions are also described. After these sample preparation techniques, the aqueous solutions obtained were analyzed on the ion chromatograph for the analyses of the anions and cations mentioned above. Recovery and reproducibility of each technique is in general quite good and the comparison between the results obtained from the IC method and other instrumentation are given.

Pulsed laser time-resolved ligand-substitution photochemistry for (DTO)W(CO)4, (DTN)W(CO)4, and (NP)Mo(CO)4 (DTO = 2,2,7,7-tetramethyl-3,6-diathiaoctane; DTN = 2,2,8,8- tetramethyl-3,7-diathianonane; NP = l-diethylamino-2- diphenylphosphinoethane) proceeds via initial fission of the W-S and Mo-P bonds, affording Cs and C4v five-coordinate intermediates for DTN and NP but largely Cs for DTO. The rates of reaction of these intermediates, via chelate ring closure and competitive bimolecular interaction with Lewis bases (= L, alkylphosphines and alkyl phosphites) for the Cs intermediates and via bimolecular interaction of L with the C4v intermediates, together with activation parameters for these processes have been determined. The rates of interactions at the Cs intermediates are significantly faster than at the C4v intermediates.

Evidence is presented that apparent silene products obtained from the metalation of cyclopentadienyldimethyl - chlorosilane either with tert-butyl1ithium or with methylenetriphenylphosphorane actually arise from the metalated starting material, a silenoid, rather than from a silafulvene intermediate. Trimethylmethoxysi1ane is shown to be an effective trap for dimethylsilafulvene. A new dimethylsilafulvene precursor, bis(dimethylmethoxysi1yl) cyclopentadiene, which gives high yields of dimethyldimethoxysi1ane and the silafulvene at temperatures as low as 240°C is reported.