Report presenting steady straight-and-level and steady turning tracking runs against an aerial target using an F-51H airplane equipped with a fixed optical sight and with various combinations of maneuvering stick-force and stick-deflection gradients. Results regarding aim wander, elevator movement, and stick-force variation for various test conditions are provided.

Report discussing an investigation to determine the effects of changes in aspect ratio and tail height on the longitudinal stability characteristics of a model with a 32.6-degree sweptback wing. The effects of a leading-edge discontinuity were also examined.

Report presenting an investigation to determine the effects of location of bodies (finned and unfinned) on the aerodynamic characteristics of unswept- and swept-wing--fuselage models and to determine the aerodynamic loads on the bodies in the presence of the wings. Results for the complete model characteristics and for the body are provided.

A low-speed wind-tunnel investigation has been made of some aspects of the aerodynamic problems associated with the use of air-to-air missiles when carried externally on aircraft. Measurements of the forces and moments on a missile model for a range of positions under the mid-semispan location of a 45deg sweptback wing indicated longitudinal and lateral forces with regard to both carriage and release of the missiles. Surveys of the characteristics of the flow field in the region likely to be traversed by the missiles showed abrupt gradients in both flow angularity and in local dynamic pressure. Through the use of aerodynamic data on the isolated missile and the measured flow-field characteristics, the longitudinal forces and moments acting on the missile while in the presence of the wing-fuselage combination could be estimated with fair accuracy. Although the lateral forces and moments predicted were qualitatively correct, there existed some large discrepancies in absolute magnitude.

Report presenting an investigation of the pumping characteristics of eight conical ejectors mounted on a fuselage portion of a supersonic airplane. The diameter ratio, spacing ratio, nozzle pressure, and ejector weight flows were varied. Results regarding the ejector pumping characteristics, comparison with previous results, comparison of data for cold and hot primary flow, and ejector air-supply requirements are provided.

Report presenting an investigation of the pumping characteristics of eight conical ejectors mounted on a scale fuselage portion of a supersonic airplane. The configurations simulated various positions of a two-position nozzle with a fixed shroud and double-iris exit. Results regarding ejector pumping characteristics, comparison with previous results, comparison of data for cold and hot primary flow, and ejector air-supply requirements are provided.

Report presenting an investigation to determine the blade torsional deflection of three supersonic-type propellers at various operating conditions. Blade-torsional deflection was found to produce appreciable results that can be predicted by theory with good accuracy. Results regarding the efficiency, thrust coefficient, and power coefficient are provided.

The variation of dielectric constant has been measured as a function of the concentration of magnesium particles; the shape, size, and degree of oxidation of the particles; the temperature; and the frequency of oscillation. The variation of dielectric constant and settling rate was investigated as a function of time. Also investigated were the effects of particle concentration, shape and time on dielectric losses.

Memorandum presenting an investigation of flow deflectors which extend forward of an open-nose inlet for improving positive angle-of-attack performance and auxiliary scoops for use at off-design engine air-flow conditions at low angles of attack to determine their effect on net inlet performance. The results show that a deflector inlet and a basic open-nose inlet have about the same net performance at low angles of attack although the flow steadiness characteristics of the deflector inlet are the less desirable.

Report discussing testing of a Douglas D-558-II to investigate its longitudinal stability characteristics in accelerated flight at supersonic speeds. Information about the normal-force coefficients and their relation to stability and pitch-up of the aircraft is included.

Memorandum presenting flight tests performed with the Douglas D-558-II research airplane in order to determine the lateral handling characteristics in straight flight at supersonic speeds. It primarily describes the lateral motions obtained at moderate and low angles of attack during a preliminary survey in pushovers and straight flight at supersonic Mach numbers up to about 2.0 at altitudes between 50,000 and 70,000 feet.

Report presenting flight tests conducted between Mach numbers of 0.9 to 1.8 over a range of Reynolds numbers to determine the zero-lift drag and some rolling-effectiveness characteristics of a proposed long-range, supersonic, ground-to-ground missile. Results regarding the longitudinal trim, drag, rolling effectiveness, and instability due to roll are provided.

Report presenting testing of a medium-camber compressor rotor with particular NACA blades in a low-speed 28-inch test blower. Testing was made at solidities of 1.0 and 0.5 without guide vanes or stators over a wide range of blade-setting angles and quantity flow rates. Results regarding overall rotor performance, comparison between measured and estimated section efficiencies near design angle of attack, comparison between low-speed rotor and cascade turning angles, and detailed blade section performance are provided.

Memorandum presenting the effects of resin coating methods on some physical properties of laminates prepared with glass fabric, Fiberglas 181, and bonded with two commercial polyester resins. The resins used were Laminac 4126 and Selectron 5003. The resin coating methods used were roller coating, application of a dilute solution of resin, resin immersion, application of monomeric styrene, and vacuum impregnation.

Report presenting data obtained from an investigation of the Douglas-D558-II airplane to determine its buffeting characteristics at high lift and supersonic speeds. From Summary: "Buffeting was encountered at normal-force coefficients greater than about 0.7 in the Mach number range from 0.96 to 1.27 but at Mach number of 1.57, a peak normal-force coefficient of 0.80 was attained with no indication of buffeting. The increase in buffet intensity with lift is very gradual at supersonic speed compared with the buffet intensity-lift variation at subsonic Mach numbers."

Report presenting an experimental investigation of external airfoils, known as paddle-control surfaces, as the longitudinal control device on a triangular wing of aspect ratio 2. The lift, drag, pitching moment, and hinge moment were obtained for a variety of Mach numbers.

Memorandum presenting an investigation made to valuate the effects of vertical height of the horizontal tail on the static longitudinal stability of a model with a wing with 35 degrees of sweepback, an aspect ratio of 4.5, a taper ratio of 0.5, and NACA 64A010 sections. The investigation also included the effects of adding a partial-span, leading-edge chord extension to the outer portions of the wing. Results regarding the effect of tail height, wing-wake and local downwash measurements, and effect of a leading-edge extension are provided.

Report presenting a flight investigation of a rocket-launched ram-jet engine incorporating an end-burning solid fuel. Results regarding acceleration, altitude, booster separation, survival time of booster adapter, and air specific impulse are provided.

Report discussing an investigation of two 45 degree swept blades in low-speed cascade tunnels at a range of angles of attack and various combinations of inlet-air angle and solidity. The isolated wing method used to design the blade predicted the twist distribution and camber shape necessary to obtain an almost uniform spanwise loading.

Report presenting an investigation to determine the effect of several chord-extension configurations at low speed on a variable-sweep airplane model with a partially cambered wing. Testing occurred at a designated Reynolds number based on the mean aerodynamic chord of the wing at 50 degrees sweep for average test conditions. Results regarding the effect of chord extensions at 50 degrees, 60 degrees, and 20 degrees sweep, effect of chord extensions on lateral stability, and a comparison with different wing modifications are provided.

Report presenting lift and drag data obtained during the Douglas X-3 airplane. The data covered the Mach number range from 0.82 to 1.20 with considerable variation in lift. A comparison of the flight data with data from wind-tunnel and rocket-model tests shows that the model tests adequately predict the performance of the airplane.

Report presenting preliminary drag data obtained for the XF-92A delta wing airplane during demonstration tests after it had been modified to use the J33-A-29 turbojet engine. Drag data, lift coefficients, and lift-curve slopes are provided.

Report presenting the effect of channel geometry on flame quenching, as calculated on the basis of average active particle chain lengths, is related among six different geometries: plane parallel plates of infinite extent, cylindrical tubes, rectangular slots, cylindrical annuli, and tubes of elliptical and equilaterally triangular shape. The results indicated that the observed variation of flame quenching as a function of quenching geometry may be successfully predicted for a range of pressures and for rich as well as lean propane-air flames.

"Flame quenching by a variable-width rectangular-slot burner as a function of pressure for various propane-oxygen-nitrogen mixtures was investigated. It was found that for cold gas temperatures of 27 degrees C, pressures of 0.1 or 1.0 atmosphere, and volumetric oxygen reactions of the oxidant of 0.17, 0.21, 0.30, 0.50, and 0.70, the relation between pressure p and quenching distance d is approximately given by d (unity) p (superscript -r) with r = 1, for equivalence ratios approximately equal to one. The quenching equation of Simon and Belles was tested" (p. 1).