From Introduction: "The present paper contains the results of the investigation of the aerodynamic characteristics at Mach number of 2.01 of the two cruciform wing missiles equipped with larger canard controls and compares the result with that obtained previously with a smaller control."

From Introduction: "This paper presents the results of tests made at a Mach number of 2.01 to determine the effect of body length on the longitudinal characteristics (zero roll angle) for five complete configurations as well as for the bodies alone, the bodies plus wings, and the bodies plus canard surfaces. The experimental results are compared with some simple theoretical estimates."

"Tests have been made in the Langley 4- by 4-foot supersonic pressure tunnel at Mach numbers of 1.41, 1.61, and 2.01 of various arrangements of a 0.04956-scale model of the Convair F-102A airplane with faired inlets. Tests made of the model equipped with a plain wing, a wing with 6.4 percent conical camber, and a wing with 15 percent conical camber. Body modifications including an extended nose, a modified canopy, and extended afterbody fillets were evaluated" (p. 1).

From Introduction: "The particular blade design, the tests of which are described in the present paper, was one necessary to the investigation of the effect of differences in blade-thickness ratios."

From Introduction: "Recent investigations have indicated several wing plan forms, wing sections, and wing-body-tail combinations suitable for flight at supersonic speeds. One such lifting surface, a thin, sharp-edged without sweep of aspect ratio 4 and taper ratio 0.5, has been the subject of an investigation in the Ames 12-foot pressure wind tunnel. The aim of the investigation was to determine the aerodynamic characteristics of such a wing plan form throughout the range of subsonic Mach numbers up to 0.94."

From Summary: "Data were obtained with five exhaust-nozzle areas and with the variable-area exhaust nozzle interlinked with the control system at conditions simulating flight at a Mach number of 0.8 and altitudes of 35,00 and 45,000 feet. Data simulating operation at zero flight Mach number at an altitude of 15,000 feet are also included. Engine component performance data are presented in addition to the overall engine performance."

From Introduction: "The general objective of this report is a study of the characteristics of the described form of peak holding control. The control has not yet been used in experimental turbojet-engine study.This study is concerned with only one method of extracting the maximum amount of information from a peak output for the purpose of maintaining that peak. The criteria sought in this control process are: maintenance of peak average output, minimum duration of time in undesirable operation, quickness in response to command to reach peak condition, least amount of excursion in the undesirable region, and type of stability."

From Summary: "Calculated velocity and temperature distributions, as well as relations among Nusselt number, Reynolds number, and friction factor, are presented."

Report presenting testing of a semispan model of a wing with the leading edge swept back 37.25 degrees, an aspect ratio of 6.04, and a taper ratio of 0.5 in order to ascertain the compressibility effects on the forces, moments, and surface pressures. Lift, drag, and pitching-moment data along with chordwise distribution of static pressure at five spanwise stations are presented for a range of Mach numbers and a constant Reynolds number. Results regarding force and moment characteristics, critical flow and drag increase at high subsonic Mach numbers, and pressure changes with increasing Mach number are provided.

From Introduction: "In this report two-stage-turbine efficiency characteristics are analyzed as a function of work and speed requirements in terms of the effect of changing the required mean-section velocity diagram. The fundamental assumptions and limits used in reference 2 and 3 are also used herein."

Report presenting the combustion efficiencies of 10 experimental jet-propulsion fuels that are approximately 200 degrees Fahrenheit cuts of five selected crudes available in large quantities in a turbojet engine combustor at altitude conditions.

Attempts were made to alleviate the buffeting of external fuel tanks mounted under the wings of a twin-engine Navy fighter plane. The Mach number at which the buffeting began was increased from 0.529 to 0.640 by streamlining the sway braces and increasing the lateral rigidity of the sway brace system. Further increases of the Mach number, at which buffeting began to 0.725, was obtained by moving the external fuel tank to a position under the fuselage.

Report presenting the results of theoretical incompressible-flow calculations of the spanwise lift distributions, lift-curve slopes, spanwise centers of pressure, aerodynamic centers, coefficients of damping in roll, rolling-moment coefficients due to aileron deflection, and induced-drag coefficients of twenty M, W, and delta wings.

Report presenting the calculated lift distributions and associated aerodynamic parameters for a Consolidated Vultee B-36 and two Boeing B-47 airplanes coupled at the wing tips for different angles of attack and deflections of the ailerons. Results regarding lifts, moments, and induced drags and the use of the data for calculating aerodynamic forces and equilibrium conditions are provided.

Memorandum presenting a modified group method used to calculate the reactivity of the uranyl-fluoride-water experimental critical assemblies which are part of the Oak Ridge critical mass studies. The method relates the experimental slowing-down length for water to that in fluoride solutions and includes the effects of epithermal absorption and fission.

Report presenting an experimental investigation of a canard-type missile configuration with an underslung scoop inlet in the 8 by 6-foot supersonic wind tunnel at a range of Mach numbers, angles of attack, control-surface deflection angles, boundary-layer-scoop heights, and inlet mass-flow ratios. Measurement of the external forces indicated that maximum lift-drag ratios were in excess of 5 at all test Mach numbers.

"Progress is being made in subjecting to systematic study some of the many important factors affecting the behavior of swept wings at high speeds. In this paper are presented some of the results of recent swept-wing investigations that were undertaken to determine the effects of thickness and thickness distribution, camber and twist, nose-flap deflection, and devices or 'fixes' for improving the wing pitching-moment characteristics at high lift coefficients" (p. 1).

Report presenting a determination of the characteristics velocity of liquid oxygen and gaseous hydrogen as a function of mixture ratio in a nominal 200-pound-thrust variable-length rocket engine. Fourteen injectors, which varied mixing and oxygen atomization, were investigated. The four types of injector designs included triplets of two hydrogen jets impinging on one oxygen jet, concentric injection with hydrogen surrounding a jet of oxygen, radial injection of oxygen with variations in hydrogen injection, and oxygen atomization by two impinging jets with variations in hydrogen injection.

From Summary: "An analysis was made to permit the calculation of the effectiveness of oxide coatings in retarding the transient heat flow into turbine blades when the combustion gas temperature of a turbojet engine is suddenly changed. The analysis is checked with experimental data obtained from a turbojet engine whose blades were coated with two different coating materials (silicon dioxide and boric oxide) by adding silicone oil and tributyl borate to the engine fuel. The very thin coatings (approximately 0.001 in.) that formed on the blades produced a negligible effect on the turbine-blade transient temperature response. With the analysis discussed here, it was possible to predict the turbine rotor-blade temperature response with a maximum error of 40 F."

"An experimental radial-survey investigation of the J71-97 three-stage turbine equipped with a first stator having a throat area 87 percent of the design value was conducted at one turbine operating point. The first-, second-, and third-stage mass-averaged efficiencies were 0.897, 0.843, and 0.755, respectively. The corresponding over-all turbine efficiency was 0.856" (p. 1).

Report presenting an investigation of an axial-discharge impeller in combination with a 16-vaned supersonic diffuser cascade over a range of flow conditions at equivalent tip speeds varying from 800 to 1600 feet per second. Results regarding the overall performance of the combination, starting of diffuser cascade, use of flow bleedoff to aid starting, radial distribution of flow angle, flow characteristics within diffuser, and efficiency of diffuser cascade are provided.

The effect of the design characteristics of various condensing chambers on magnesium build-up at the chamber inlet was investigated. The condensing chambers are used in the vapor-condensation process for making magnesium slurries. A complete description of the various chamber designs and the procedure used in testing the chambers is given. The results are evaluated on the basis of clogging and total magnesium distilled per run. Orifice design was also considered.

Note presenting a practical method, employing a lofting technique, for determining the profile coordinates of an air inlet for the leading edge of an airfoil from formulas which are dependent only on the airfoil coordinates and on the height of the opening. It was found that the base-profile concept of thin-airfoil theory could be applied to a ducted airfoil with satisfactory results. Results regarding design inlets, modified inlets, and end-closure shape are provided.

A wind-tunnel investigation to determine the downwash angles in a transverse plane behind the wings of six wing-body combinations at Mach number 0.25. A triangular wing of aspect ratio 2.0 and a trapezoidal wing of aspect ratio 3.0 were tested in combination with three geometrically similar slender bodies of revolution.