Report discusses the results of testing of thallium as an antiknock agent in an internal-combustion engine. From Introduction: "On a weight basis, the thallium vapors were found to have several times the antiknock value of tetraethyl lead, which was added to the fuel. The amount of thallium vapor necessary to raise the antiknock properties of a gasoline up to exact equivalence with a benzol-gasoline mixture was determined in these engine tests."

Lift characteristics and pressure distribution for a NACA 230 wing were investigated for an angle of attack range of from -10 to +24 degrees and Mach range of from 0.2 to 0.7. Maximum lift coefficient increased up to a Mach number of 0.3, decreased rapidly to a Mach number of 0.55, and then decreased moderately. At high speeds, maximum lift coefficient was reached at from 10 to 12 degrees beyond the stalling angle. In high-speed stalls, resultant load underwent a moderate shift outward.

Bulletin presenting tests made in the two-dimensional low-turbulence tunnel of an airfoil section with roughness in the form of carborundum grains applied to the leading edge. Marked reductions in maximum lift coefficient were found to be caused by the roughness throughout the test range of Reynolds number.

Report presenting a study of a family of three single-stage deep inducers designed to impart solid-body, or wheel, rotation in the entering air at constant rates along the axial depth of the inducers. The cast inducers tested were 4-inch axial depth with 24 blades, 4-inch depth with 12 blades, and 2-inch depth with 24 blades. Results regarding the cast inducers of the constant-angular-acceleration family, inducer section from the conventional impeller, and estimate of the inducer effect are provided.

Statistical methods were applied to acceleration and airspeed data obtained with the XC-35 airplane during flights in turbulent air within convective clouds in order to determine the characteristics of repeated or closely spaced gusts pertinent to design problems. Results indicated that, in turbulent air within convective cloud, gusts tend to be contiguous and are seldom found isolated in space. Over-all average spacing between repeated gusts was in good agreement with twice the average gust-gradient distance of 10 chords used in present design.

Report discussing testing on a twin-engine airplane to determine which modifications would make it suitable for ground-support attack operations. Some of the suggested modifications include replacing fabric-covered elevators with metal-covered elevators with a balance tab, replacing fabric-covered ailerons with metal-covered ailerons with a balance tab, sealing the airplane, fairing the nose guns, removing the lower-periscope deflector, and fairing the bomb racks. The results of other types of configurations are included in the report.

Report presenting testing in the full-scale tunnel of the Grumman XF6F-4 airplane to investigate the factors that affect the directional stability and trim characteristics of a typical fighter-type airplane. Eight representative flight conditions were investigated in detail.

From Summary: "A method has been developed for interpreting v-g records taken during the course of commercial transport operation. This method involves the utilization of fairly simple statistical procedures to obtain "flight envelopes," which predict that, on the average, in a stated number of flight hours, one value of airspeed will exceed the envelope, and one positive and one negative acceleration increment will exceed the envelope with equal probability of being experienced at any airspeed. Comparison with the actual data obtained from various airplanes and from various airlines indicates that these envelopes predict the occurrences of large values of acceleration and airspeed with a high degree of accuracy."

Report presenting a description of an experimental model of a flight instrument that utilizes infrared radiations for detecting and indicating the location of clouds at night. A preliminary investigation is made of data in the scientific literature. A table and chart are developed that make it practical to determine the magnitude of the net exchange of radiation for any particular atmosphere of known composition and distribution of temperature.

Report presents the results of rupture tests conducted on nine alloys for periods of up to 400 hours duration at 1700 and 1800 degrees Fahrenheit. The nine alloys tested were 6059, Vitallium, 422-19, 61, X-40, X-50 (all of which are precision-cast), S590, S816, and Low Carbon N155 (all of which are wrought). Information about range in rupture strength, a metallographic examination, Vickers hardness surveys, and the general properties of the alloys during testing is also included.

Report discusses the results of a study of the ultraviolet absorption spectra in the 3200 A to 2500 A region of 27 aromatic amines in iscoctane and and in water solutions. Factors that affect the absorption spectra of aromatic amines were investigated, and the spectra in the two different solvents were compared. The main variables affecting the absorption are the nature of the solvent, the purity of the aromatic amines, and photochemical decomposition of the aromatic amines.

From Summary: "A method of quantitative analysis for individual aromatic amines or mixtures of aromatic amines in hydrocarbon fuel blends by spectrophotometric measurement of ultraviolet-light absorption is presented. The effect of the precision of the spectrophotometric measurements, the purity of the aromatic amine, photochemical decomposition of the amine, and the composition of the fuel on the accuracy of the analysis is discussed and the results of tests of the precision of the procedure are given."

Report discussing the suitability of 42 aromatic amines as antiknock additives for aviation gasoline at low temperatures similar to the ones encountered in flight.

Report presenting direct-reading tables and charts for determining the drag or thrust coefficients from wake-survey measurements in the subsonic speed range. Additionally, numerical examples are provided using information from the tables.

Report presenting a consideration of the possibility of using conducting rubber as the conductor in aircraft ignition cable. The effects of stretch, temperature, and continuous and impulsive currents on the resistance of several conducting-rubber test strips of the same position were determined. Two types of experimental conducting-rubber cable were tested.

Report presenting a derivation to show that, if the air-fuel ratio at lean mixtures is plotted against the fuel-air ratio at rich mixtures for identical values of the knock-limited indicated mean effective pressure on each side of the minimum indicated-mean-effective-pressure point, a straight line should result.