The Determination of Thorium in Uranium-Thorium Alloys, Using Cupferron (open access)

The Determination of Thorium in Uranium-Thorium Alloys, Using Cupferron

Technical report describing that the use of controlled amounts of carbonate, acting both as complexing agent buffer led to a fairly satisfactory procedure for the determination of Th in Th-U alloys, using cupferron. The alloy, dissolved in NHO2, in the presence of HF, is treated with H2SO4 and the mixture is evaporated in SO2 fumes. The solution is diluted and (NH4)2CO2 is added. Th is precipitated from this solution with cupferron. The precipitate is weighed as ThO2 after ignition. An accuracy of 6% was obtained. A method was developed specifically for the determination of Th in U-Th alloys containing 1 to 10% Th. An ion exchange resin in column is used to separate Th from U, with NH2OH-HCl as complexing agent. The Th is then precipitated, ignited, and weighed in the conventional manner.
Date: November 23, 1945
Creator: Eckert, A. C. & Bane, R. W.
System: The UNT Digital Library
Majuba Hill Mine, Pershing County, Nevada : preliminary report (open access)

Majuba Hill Mine, Pershing County, Nevada : preliminary report

Discussing the Majuba Hill mine, located 20 miles northwest of Imlay, Nevada, and consisting of approximately 4000 feet of workings on three levels.
Date: November 23, 1948
Creator: Wyant, Donald G.
System: The UNT Digital Library
Reactivity Lifetime. Section I. Third Performance. 2797-3797 EFPH. Core I Seed I. (open access)

Reactivity Lifetime. Section I. Third Performance. 2797-3797 EFPH. Core I Seed I.

The PWR Plant was operated at approximately 60 MW net electrical output for a total of 1000 EFPH from February 3, 1959 to March 28, 1959. During this period, while performing DL-S-225, there were two planned shutdowns, no safety shutdowns or safety insertions and one flux title. The performance of the plant was satisfactory during the period of the test.
Date: November 23, 1959
Creator: Lawrence, Roger J.
System: The UNT Digital Library
Determination of Possible Failed Blanket Elements Using the FEDAL System. Section I. First Performance. Core I, Seed 1. Test Results DL-S-2810S, RNI-24 (open access)

Determination of Possible Failed Blanket Elements Using the FEDAL System. Section I. First Performance. Core I, Seed 1. Test Results DL-S-2810S, RNI-24

The purpose of the test was to determine if failed blanket elements exist in other regions of the core beside F-2. FEDAL sampling ports that have indicted the greatest deviation as determined in a statistical analysis performed on a number of traverses in the FEDAL system will be tested. Data obtained from the start up runs of the FEDAL sample port Nos. 11, 31, 36 and 37 of Monitor 2 and port Nos. 14, 46, 11, 49 and 7 of Monitor 1 gave no indications of a blanket element failure. At each power increase, the radiation increase was normal with no signs of bursts or peaks of radiation which would indication the failure of a blanket fuel element.
Date: November 23, 1959
Creator: Pazuchanics, Nicholas & Kearns, Walter
System: The UNT Digital Library
Present Status of Semiconductor Particle Counters (open access)

Present Status of Semiconductor Particle Counters

This review lists some of the salient features of semiconductor particle counters and cannot claim to contain an exhaustive listing of all the work in the field. Performance results on the surface-barrier counters as developed at California Institute of Technology are included as typical for this type of counter, though comparable results have been obtained elsewhere.
Date: November 23, 1959
Creator: Barnes, C. A.
System: The UNT Digital Library