We have undertaken an adaptive optics imaging survey of extrasolar planetary systems and stars showing interesting radial velocity trends from high precision radial velocity searches. Adaptive Optics increases the resolution and dynamic range of an image, substantially improving the detectability of faint close companions. This survey is sensitive to objects less luminous than the bottom of the main sequence at separations as close as 1 inch. We have detected stellar companions to the planet bearing stars HD 114762 and Tau Boo. We have also detected a companion to the non-planet bearing star 16 Cyg A.

We have undertaken an adaptive optics imaging survey of extrasolar planetary systems and stars showing interesting radial velocity trends from high precision radial velocity searches. Adaptive Optics increases the resolution and dynamic range of an image, substantially improving the detectability of faint close companions. This survey is sensitive to objects less luminous than the bottom of the main sequence at separations as close as 1 inch. We have detected stellar companions to the planet bearing stars HD 114762 and Tau Boo. We have also detected a companion to the non-planet bearing star 16 Cyg A.

We assessed particle deposition and loss occurring in two alpha-air monitors: an Eberline Alpha-3 Continuous Air Monitor (CAM) and a working-area transuranic aerosol monitor (WOTAMS). We investigated the dependence of particle size on losses in the sampling inlets and the real-time alpha detector areas for both instruments. We determined the uniformity of particle deposition on the filter to ascertain the effectiveness of the detector and collection-filter configuration. Results indicate that particle losses are a strong function of particle size in the CAM unit, with a 44% loss occurring for 6-..mu..m-diameter aerosols and a 0.3% loss for 0.6-..mu..m-diameter aerosols. Losses in the WOTAMS were less than 1% for particle diameters in the 0.6-to-7 ..mu..m range.

McDermott Technology, Inc. (MTI) is attempting to develop high-performance, cost-competitive solid oxide fuel cell (SOFC) power systems. Recognizing the challenges and limitations facing the development of SOFC stacks comprised of electrode-supported cells and metallic interconnects, McDermott Technology, Inc. (MTI) has chosen to pursue an alternate path to commercialization. MTI is developing a multi-layer, co-fired, planar SOFC stack that will provide superior performance and reliability at reduced costs relative to competing designs. The MTI approach combines state-of-the-art SOFC materials with the manufacturing technology and infrastructure established for multi-layer ceramic (MLC) packages for the microelectronics industry. The rationale for using MLC packaging technology is that high quality, low-cost manufacturing has been demonstrated at high volumes. With the proper selection of SOFC materials, implementation of MLC fabrication methods offers unique designs for stacks (cells and interconnects) that are not possible through traditional fabrication methods. The MTI approach eliminates use of metal interconnects and ceramic-metal seals, which are primary sources of stack performance degradation. Co-fired cells are less susceptible to thermal cycling stresses by using material compositions that have closely matched coefficients of thermal expansion between the cell and the interconnect. The development of this SOFC stack technology was initiated in October 1999 under …

Aluminum hydride is a covalent, binary hydride that has been known for more than 60 years and is an attractive medium for on-board automotive hydrogen storage, since it contains 10.1% by wt. hydrogen with a density of 1.48 g/ml. There are at least 7 non-solvated AlH{sub 3} phases, namely {alpha}, {alpha}{prime}, {beta}, {gamma}, {var_epsilon} and {zeta}. The properties of {alpha}-AlH{sub 3}, obtained from the Dow Chemical Co. in 1980, have been previously reported. Here we present a description of the thermodynamic and kinetic properties of freshly prepared {alpha}, {beta} and {gamma} phases of AlH{sub 3}. In all cases the decomposition kinetics are appreciable below 100 C and all will meet the DOE 2010 gravimetric and volumetric vehicular system targets (6 wt% H{sub 2} and 0.045 kg/L). However, further research will be required to develop an efficient and economical process to regenerate AlH{sub 3} from the spent Al powder.

The lateral order of poly(styrene-block-isoprene) copolymer(PS-b-PI) thin films is characterized by the emerging technique ofresonant soft X-ray scattering (RSOXS) at the carbon K edge and comparedto ordering in bulk samples of the same materials measured usingconventional small-angle X-ray scattering. We show resonance using theoryand experiment that the loss of scattering intensity expected with adecrease in sample volume in the case of thin films can be overcome bytuning X-rays to the pi* resonance of PS or PI. Using RSOXS, we study themicrophase ordering of cylinder- and phere-forming PS-b-PI thin films andcompare these results to position space data obtained by atomic forcemicroscopy. Our ability to examine large sample areas (~;9000 mu m2) byRSOXS enables unambiguous identification of the lateral lattice structurein the thin films. In the case of the sphere-forming copolymer thin film,where the spheres are hexagonally arranged, the average sphere-to-spherespacing is between the bulk (body-centered cubic) nearest neighbor andbulk unit cell spacings. In the case of the cylinder-forming copolymerthin film, the cylinder-to-cylinder spacing is within experimental errorof that obtained in the bulk.

This document serves as a User`s Manual and Reference for the library of Tcl and Tk procedures produced by the Operations Analysis Group. Also covered are compiled interpreter extensions.

The status of aqueous processing methods for Th fuels is reviewed. A specially designed 320 ton shear was successfully tested for chopping full size simulated Consolidated Edison type unirradiated assemblies into 0.25-1.5 in. lengths. Pieces about 0.5-in. long are preferred since the core pellets are more severely crushed during the chopping operation, and consequently, the rate of core dissolution is enhanced. The Darex (dtlute aqua regia) and Sulfex (4 to 6 M sulfuric acid) processes for dissolution of stainless steel claddings were developed on a small engineering scale with unirradiated fuel. In hot cell tests on stainless steel clad ThO/sub 2/-UO/sub 2/ fuel pins irradiated up to 22,000 Mwd/ton of fuel, the core pellets were severely fractured and losses of U and Th to the Sulfex and Darex solutions were approximates 0.3% and 3 to 5%, respectively. The latter losses are easily recovered in the extraction system. U and Th can be recovered from graphite base fuels by burning and dissoiution of the ash in HNO/sub 3/ or by grinding to approximates 200 mesh followed by HNO/sub 3/ leaching. The Acid Thorex extraction process was developed to recover both U and Th using tributyl phosphate (TBP) as the solvent and …

Some common instruments found in the chemistry laboratory have analog chart recorder output as their primary data readout media. Data reduction from this medium is slow and relatively inaccurate. This paper describes how to interface a single LSI-11 microcomputer to PERKIN-ELMER models 603 and 303 Atomic Absorption Spectrophotometers.

The purpose of this cooperative research and development agreement (CRADA) between Sasol North America, Inc., and the oak Ridge National Laboratory (ORNL) was to improve the stability of alumina-based industrial catalysts through the combination of aberration-corrected scanning transmission electron microscopy (STEM) at ORNL and innovative sample preparation techniques at Sasol. Outstanding progress has been made in task 1, 'Atomistic processes of La stabilization'. STEM investigations provided structural information with single-atom precision, showing the lattice location of La dopant atoms, thus enabling first-principles calculations of binding energies, which were performed in collaboration with Vanderbilt University. The stabilization mechanism turns out to be entirely due to a particularly strong binding energy of the La tom to the {gamma}-alumina surface. The large size of the La atom precludes incorporation of La into the bulk alumina and also strains the surface, thus preventing any clustering of La atoms. Thus highly disperse distribution is achieved and confirmed by STEM images. la also affects relative stability of the exposed surfaces of {gamma}-alumina, making the 100 surface more stable for the doped case, unlike the 110 surface for pure {gamma}-alumina. From the first-principles calculations, they can estimate the increase in transition temperature for the 3% loading of …

Although the phylogenetic relationships of many organisms have been convincingly resolved by the comparisons of nucleotide or amino acid sequences, others have remained equivocal despite great effort. Now that large-scale genome sequencing projects are sampling many lineages, it is becoming feasible to compare large data sets of genome-level features and to develop this as a tool for phylogenetic reconstruction that has advantages over conventional sequence comparisons. Although it is unlikely that these will address a large number of evolutionary branch points across the broad tree of life due to the infeasibility of such sampling, they have great potential for convincingly resolving many critical, contested relationships for which no other data seems promising. However, it is important that we recognize potential pitfalls, establish reasonable standards for acceptance, and employ rigorous methodology to guard against a return to earlier days of scenario-driven evolutionary reconstructions.

We consider the production of black holes at the LHC in the Randall-Sundrum (RS) model through the collisions of Standard Model(SM) fields in the bulk. In comparison to the previously studied case where the SM fields are all confined to the TeV brane, we find substantial suppressions to the corresponding collider cross sections for all initial states, i.e., gg, qq and gq, where q represents a light quark or anti-quark which lie close to the Planck brane. For b quarks, which are closer to the TeV brane, this suppression effect is somewhat weaker though b quark contributions to the cross section are already quite small due to their relatively small parton densities. Semi-quantitatively, we find that the overall black hole cross section is reduced by roughly two orders of magnitude in comparison to the traditional TeV brane localized RS model with the exact value being sensitive to the detailed localizations of the light SM fermions in the bulk.

Volume rendering converts a scalar function on a 3D volume into varying colors and opacities, and creates an image by integrating the color and opacity effects along viewing rays through each pixel [1]. For data specified on a regular grid, the ray tracing is straightforward [2,3,4,5], and similar effects can be obtained with 3D textures [6]. For curvilinear or irregular grids, these methods are only applicable after the data has been resampled. An alternative, which works directly on these more general grids, is cell projection [7,8,9]. The cells composited onto the image in back to front sorted order. The projections of the edges of a single cell divide the image plane into polygons, which can be scan converted and composited by standard graphics hardware. In references [9,10,11], we assumed that the cells were polyhedra with planar faces. A curvilinear grid maps a rectangular grid onto a curved volume, for example to fit next to an airplane wing or ship hull, and quadrilateral faces may map to non-planar surfaces. Irregular grids are fitted to complex geometries, for example mechanical parts, and even initially flat faces may become non-planar as the grid elements deform, for example, in a car crash simulation. Non-planar …

The present project is devoted to developing hydrogen permselective silica membranes supported on composite supports to achieve high flux and selectivity. The supports consist of a thin zeolite silicalite layer coated on {alpha}-Al{sub 2}O{sub 3} tubes of mean pore size 1 {micro}m. The zeolite layer is grown by reaction in a suitable silicate solution at 95 C. After two or three reaction periods a layer of silicalite crystals about 20 {micro}m thick grows inside the pores of alumina. In addition to the zeolitic pores, this layer contains voids of a few nanometer diameter that remain between the crystals or between the crystals and the pore walls. The quality of the silicalite/alumina composites was evaluated by gas permeation measurements and by nitrogen adsorption and it was found that the residual voids were below 5 nm in diameter. Three techniques were investigated for chemical vapor deposition (CVD) of the silica layer on the silicalite/alumina composite support. The first was TEOS pyrolysis at approximately one millibar partial pressure and 650 C. After 8 h reaction the fluxes of hydrogen and nitrogen at ambient temperature had declined by a factor of approximately 100 indicating sealing of defects and zeolitic pores alike. The second CVD …

During 2005 and 2006, the USGS conducted geological studies of fault zones at surface outcrops at the Nevada Test Site. The objectives of these studies were to characterize fault geometry, identify the presence of fault splays, and understand the width and internal architecture of fault zones. Geologic investigations were conducted at surface exposures in upland areas adjacent to Yucca Flat, a basin in the northeastern part of the Nevada Test Site; these data serve as control points for the interpretation of the subsurface data collected at Yucca Flat by other USGS scientists. Fault zones in volcanic rocks near Yucca Flat differ in character and width as a result of differences in the degree of welding and alteration of the protolith, and amount of fault offset. Fault-related damage zones tend to scale with fault offset; damage zones associated with large-offset faults (>100 m) are many tens of meters wide, whereas damage zones associated with smaller-offset faults are generally a only a meter or two wide. Zeolitically-altered tuff develops moderate-sized damage zones whereas vitric nonwelded, bedded and airfall tuff have very minor damage zones, often consisting of the fault zone itself as a deformation band, with minor fault effect to the surrounding …

Various combinations of reactor type and fuel composition have been characterized using principle components analysis (PCA) of the concentrations of 9 U and Pu isotopes in the 10 fuel as a function of burnup. The use of PCA allows the reduction of the 9-dimensional data (isotopic concentrations) into a 3-dimensional approximation, giving a visual representation of the changes in nuclear fuel composition with burnup. Real-world variation in the concentrations of {sup 234}U and {sup 236}U in the fresh (unirradiated) fuel was accounted for. The effects of reprocessing were also simulated. The results suggest that, 15 even after reprocessing, Pu isotopes can be used to determine both the type of reactor and the initial fuel composition with good discrimination. Finally, partial least squares discriminant analysis (PSLDA) was investigated as a substitute for PCA. Our results suggest that PLSDA is a better tool for this application where separation between known classes is most important.

This document is explanatory in nature and is intended to clarify certain questions about reactor neutron flux spectra in various AEC production facilities. Simplified models are used to illustrate neutron ``temperature,`` spectral ``hardening,`` and the so-called ``Westcott R.``

Studies on the fate and transport of radioactive contaminates in the environment are often constrained by a lack of knowledge on the elemental distribution and general behavior of particulate bound radionuclides contained in hot particles. A number of hot particles were previously isolated from soil samples collected at former U.S. nuclear test sites in the Marshall Islands and characterized using non-destructive techniques [1]. The present investigation at HASYLAB is a part of larger research program at ITU regarding the characterization of environmental radioactive particles different locations and source-terms. Radioactive particles in the environment are formed under a number of different release scenarios and, as such, their physicochemical properties may provide a basis for identifying source-term specific contamination regimes. Consequently, studies on hot particles are not only important in terms of studying the elemental composition and geochemical behavior of hot particles but may also lead to advances in assessing the long-term impacts of radioactive contamination on the environment. Six particles isolated from soil samples collected at the Marshall Islands were studied. The element distribution in the particles was determined by confocal {micro}-XRF analysis using the ANKA FLUO beam line. The CRL (compound refractive lens) was used to focus the exciting beam …

With more and more people working at home and connecting to company networks via the Internet, the risk to company networks to intrusion and theft of sensitive information is growing. Working from home has many positive advantages for both the home worker and the company they work for. However, as companies encourage people to work from home, they need to start considering the interaction of the employee's home network and the company network he connects to. This paper discusses problems and solutions related to protection of home computers from attacks on those computers via the network connection. It does not consider protection of those systems from people who have physical access to the computers nor does it consider company laptops taken on-the-road. Home networks are often targeted by intruders because they are plentiful and they are usually not well secured. While companies have departments of professionals to maintain and secure their networks, home networks are maintained by the employee who may be less knowledgeable about network security matters. The biggest problems with home networks are that: Home networks are not designed to be secure and may use technologies (wireless) that are not secure; The operating systems are not secured when …

The Savannah River Site has stored radioactive wastes in large, underground, carbon steel tanks for approximately 60 years. An assessment of potential degradation mechanisms determined that the tanks may be vulnerable to nitrate- induced pitting corrosion and stress corrosion cracking. Controls on the solution chemistry and temperature of the wastes are in place to mitigate these mechanisms. These controls are based upon a series of experiments performed using simulated solutions on materials used for construction of the tanks. The technical bases and evolution of these controls is presented in this paper.

The cookoff of energetic materials involves the combined effects of several physical and chemical processes. These processes include heat transfer, chemical decomposition, and mechanical response. The interaction and coupling between these processes influence both the time-to-event and the violence of reaction. The prediction of the behavior of explosives during cookoff, particularly with respect to reaction violence, is a challenging task. To this end, a joint DoD/DOE program has been initiated to develop models for cookoff, and to perform experiments to validate those models. In this paper, a series of cookoff analyses are presented and compared with data from a number of experiments for the aluminized, RDX-based, Navy explosive PBXN-109. The traditional thermal-chemical analysis is used to calculate time-to-event and characterize the heat transfer and boundary conditions. A reaction mechanism based on Tarver and McGuire's work on RDX{sup 2} was adjusted to match the spherical one-dimensional time-to-explosion data. The predicted time-to-event using this reaction mechanism compares favorably with the validation tests. Coupled thermal-chemical-mechanical analysis is used to calculate the mechanical response of the confinement and the energetic material state prior to ignition. The predicted state of the material includes the temperature, stress-field, porosity, and extent of reaction. There is little experimental …

Arrays of clustered, regularly spaced short palindromic repeats (CRISPR) are widespread in the genomes of many bacteria and almost all archaea. These arrays are composed of direct repeats sized 24-47 bp separated by similarly sized non-repetitive sequences (spacers). It was recently experimentally shown that CRISPR arrays, along with a group of associated proteins, confer resistance to phage. Following exposure to phage, bacteria integrate new spacer sequences that are derived from the phage genome. Acquisition of these spacers enables the bacterial cell to shutdown the phage attack, presumably by an RNA-interference-like mechanism. This progress discusses the structure and function of CRISPRs and the implications of his new antiviral mechanisms in bacteria.

Mercury (Hg) and its compounds have long been recognized as potentially hazardous to human health and the environment. Many man-made sources of mercury have been reduced in recent years through process changes and control measures. However, emissions of mercury from coal-fired power plants, while exceedingly dilute by the usual pollution standards, still constitute a major source when considered in the aggregate. Concerns over those emissions and the prospect of impending emissions regulations have led to a wide range of research projects dealing with the measurement and control of mercury in flue gas. This work has made considerable progress in improving the understanding of mercury emissions and their behavior, but inconsistencies and unexpected results have also shown that a better understanding of mercury chemistry is needed. To develop a more complete understanding of where additional research on mercury chemistry is needed, the U.S. Department of Energy (DOE) asked Argonne National Laboratory (Argonne) to conduct a critical review of the available information as reported in the technical literature. The objectives were to summarize the current state of the art of chemistry knowledge, identify significant knowledge gaps, and recommend future research to resolve those gaps. An initial evaluation of potential review topics indicated …

In a previous publication, procedures were proposed for unambiguously extracting amplitudes for single and double ionization from a time-dependent wavepacket by effectively propagating for an infinite time following a radiation pulse. Here we demonstrate the accuracy and utility of those methods for describing two-photon single and one-photon double ionization of helium. In particular it is shown how narrow features corresponding to autoionizing states are easily resolved with these methods.