This report describes the results made in fulfillment of contract DE-FG26-00BC15190, ''3-D Reservoir and Stochastic Fracture Network Modeling for Enhanced Oil Recovery, Circle Ridge Phosphoria/Tensleep Reservoir, Wind River Reservation, Arapaho and Shoshone Tribes, Wyoming''. The goal of this project is to improve the recovery of oil from the Tensleep and Phosphoria Formations in Circle Ridge Oilfield, located on the Wind River Reservation in Wyoming, through an innovative integration of matrix characterization, structural reconstruction, and the characterization of the fracturing in the reservoir through the use of discrete fracture network models. Fields in which natural fractures dominate reservoir permeability, such as the Circle Ridge Field, often experience sub-optimal recovery when recovery processes are designed and implemented that do not take advantage of the fracture systems. For example, a conventional waterflood in a main structural block of the Field was implemented and later suspended due to unattractive results. It is estimated that somewhere less than 20% of the OOIP in the Circle Ridge Field have been recovered after more than 50 years' production. Marathon Oil Company identified the Circle Ridge Field as an attractive candidate for several advanced IOR processes that explicitly take advantage of the natural fracture system. These processes require …

SSRL, a division of the Stanford Linear Accelerator Center, is a national user facility which provides synchrotron radiation, a name given to x-rays or light produced by electrons circulating in a storage ring at nearly the speed of light. The synchrotron radiation is produced by the 3.3 GeV storage ring, SPEAR. SPEAR is a fully dedicated synchrotron radiation facility which has been operating for user experiments 6 to 7 months per year. 1994, the third year of operation of SSRL as a fully dedicated, low-emittance, independent user facility was superb. The facility ran extremely well, delivering 89% of the scheduled user beam to 25 experimental stations during 6.5 months of user running. Over 600 users came from 167 institutions to participate in 343 experiments. Users from private industry were involved in 31% of these experiments. The SPEAR accelerator ran very well with no major component failures and an unscheduled down time of only 2.9%. In addition to this increased reliability, there was a significant improvement in the stability of the beam. The enhancements to the SPEAR orbit as part of a concerted three-year program were particularly noticeable to users. the standard deviation of beam movement (both planes) in the last …

This procedure will document the satisfactory operation of the 241-AN-107 Video Camera System. The camera assembly, including camera mast, pan-and-tilt unit, camera, and lights, will be installed in Tank 241-AN-107 to monitor activities during the Caustic Addition Project. The camera focus, zoom, and iris remote controls will be functionally tested. The resolution and color rendition of the camera will be verified using standard reference charts. The pan-and-tilt unit will be tested for required ranges of motion, and the camera lights will be functionally tested. The master control station equipment, including the monitor, VCRs, printer, character generator, and video micrometer will be set up and performance tested in accordance with original equipment manufacturer`s specifications. The accuracy of the video micrometer to measure objects in the range of 0.25 inches to 67 inches will be verified. The gas drying distribution system will be tested to ensure that a drying gas can be flowed over the camera and lens in the event that condensation forms on these components. This test will be performed by attaching the gas input connector, located in the upper junction box, to a pressurized gas supply and verifying that the check valve, located in the camera housing, opens to …

During the sixth quarter of this research project the research team developed a method and the experimental procedures for acquiring the data needed for ultrasonic tomography of rock core samples under triaxial stress conditions as outlined in Task 10. Traditional triaxial compression experiments, where compressional and shear wave velocities are measured, provide little or no information about the internal spatial distribution of mechanical damage within the sample. The velocities measured between platen-to-platen or sensor-to-sensor reflects an averaging of all the velocities occurring along that particular raypath across the boundaries of the rock. The research team is attempting to develop and refine a laboratory equivalent of seismic tomography for use on rock samples deformed under triaxial stress conditions. Seismic tomography, utilized for example in crosswell tomography, allows an imaging of the velocities within a discrete zone within the rock. Ultrasonic or acoustic tomography is essentially the extension of that field technology applied to rock samples deforming in the laboratory at high pressures. This report outlines the technical steps and procedures for developing this technology for use on weak, soft chalk samples. Laboratory tests indicate that the chalk samples exhibit major changes in compressional and shear wave velocities during compaction. Since chalk …

During the seven quarter of the project the research team analyzed some of the acoustic velocity data and rock deformation data. The goal is to create a series of ''deformation-velocity maps'' which can outline the types of rock deformational mechanisms which can occur at high pressures and then associate those with specific compressional or shear wave velocity signatures. During this quarter, we began to analyze both the acoustical and deformational properties of the various rock types. Some of the preliminary velocity data from the Danian chalk will be presented in this report. This rock type was selected for the initial efforts as it will be used in the tomographic imaging study outlined in Task 10. This is one of the more important rock types in the study as the Danian chalk is thought to represent an excellent analog to the Ekofisk chalk that has caused so many problems in the North Sea. Some of the preliminary acoustic velocity data obtained during this phase of the project indicates that during pore collapse and compaction of this chalk, the acoustic velocities can change by as much as 200 m/s. Theoretically, this significant velocity change should be detectable during repeated successive 3-D seismic …

The objective of this report is to provide information to help DOE plan its future activities on liquid-desiccant technologies. The report meets this objective by (1) identifying commercial and residential markets where the liquid-desiccant systems will first be most successful and (2) identifying advances in the individual components of a liquid-desiccant system that will allow it to expand into new markets.

Report presenting an investigation of a series of wings of various plan forms in the high-velocity field of the side-wall reflection plate of the 7- by 10-foot tunnel at a range of angles of attack and Mach numbers. The results indicated that the maximum lift coefficients obtainable increased with increase in sweep angle and decreased with Mach number at the lower subsonic Mach numbers.

The destruction of a full scale mockup ROVER/NERVA propulsion engine· was performed under the direction of the joint AEC/NASA Space Nuclear Propulsion Office. The instrumentation was developed and installed by Aberdeen Proving Ground and Sandia Corporation. The data collected included information about the destruct debris velocity, size, weight, and spacial distribution. These data are a satisfactory source term for the computer analysis of the ROVER/NERVA Program safety.

This report discusses federal credit assistance for farmers and recent issues in Congress related to the programs.

This report discusses the issue of children that have been left as orphans due to AIDS taking their parents lives. Moreover, the report details that between 2001 and 2003 the number of children orphaned from AIDS increased by 3.5 million. The rate of orphaned children is only expected to increase in the future if massive spending is not issued to curb the problem.

The focus of this report is Algeria, a country in North Africa that is increasingly important for U.S. efforts to counter international terrorism as a key partner in the fight against Al Qaeda linked groups. As an energy producer, it also is a significant source of natural gas for the United States and not a major recipient of U.S. aid. This report discusses Algeria's current political conditions and Algeria-related U.S. policy.

This report briefly discusses the amending process, which is central to the consideration of legislation by the House of Representatives, and the rules, practices, and precedents that underlie this process frequently depend on distinguishing among amendments based on their type and form. Simply put, not all amendments are equal in a procedural sense, and the form or type of amendment frequently determines what further amendments may be offered, and therefore what alternatives the House may choose among.

From Introduction: "This paper describes the theoretical treatment that has been given the combustion process as it occurs in turbojet combustors. Various parts of this work have been previously published (refs. 1 to 3); this report presents a brief summary of this previous work together with new data which amplify the conclusions of references 1 to 3. Similar studies have been made of the ram-jet combustion process (ref. 4 and 5); however, the analysis for ram-jet combustion differs in some details and is therefore not included herein."

On June 1, 1948, a fire in the neoprene seal at 100-F Area potentially exposed nine to radioactive. An overnight collection of urine was made from these men and the samples submitted, along with a piece of neoprene seal, to the H.I. Development Laboratory for analysis. It is the purpose of this report to present the results of our investigation as to the type of contamination from the burning neoprene and the amount of contamination found in the urine sample.

This report is on An Analysis of the Housing and Community Development Act of 1977.

The Defense Waste Processing Facility (DWPF) began processing Sludge Batch 7b (SB7b), also referred to as Macrobatch 9 (MB9), in January 2012. SB7b is a blend of the heel of Tank 40 from Sludge Batch 7a (SB7a) and the SB7b material that was transferred to Tank 40 from Tank 51. SB7b was processed using Frit 418. During processing of each sludge batch, the DWPF is required to take at least one glass sample to meet the objectives of the Glass Product Control Program (GPCP), which is governed by the DWPF Waste Form Compliance Plan, and to complete the necessary Production Records so that the final glass product may be disposed of at a Federal Repository. Two pour stream glass samples were collected while processing SB7b. The samples were transferred to the Savannah River National Laboratory (SRNL) where one was analyzed and the other was archived. The following conclusions were drawn from the analytical results provided in this report: The sum of oxides for the official SB7b pour stream glass is within the Product Composition Control System (PCCS) limits (95-105 wt%); The average calculated Waste Dilution Factor (WDF) for SB7b is 2.3. In general, the measured radionuclide content of the official …

The Fuels Material Examination Facility/Fuel Assembly Area is proposed to be used for fabrication of mixed oxide fuel to support the Fast Flux Test Facility (FFTF) tritium/medical isotope mission. The plutonium isotope mix for the new mission is different than that analyzed in the FMEF safety analysis report. A reanalysis was performed of three representative accidents for the revised plutonium mix to determine the impact on the safety analysis. Current versions computer codes and meterology data files were used for the analysis. The revised accidents were a criticality, an explosion in a glovebox, and a tornado. The analysis concluded that risk guidelines were met with the revised plutonium mix.

Annual financial report of Angelo State University for fiscal year 2012 providing statements of assets, revenues, expenses, bond information, and other relevant data.

Report presenting a paper to consider the feasibility of attaining, through the use of non-afterburning engines, essentially the same range with an all-supersonic mission as the range currently obtained with a mission incorporating subsonic cruise and supersonic dash.

Appropriations are one part of a complex federal budget process that includes budget resolutions, appropriations (regular, supplemental, and continuing) bills, rescissions, and budget reconciliation bills. This report is a guide to one of the 13 regular appropriations bills that Congress considers each year. It is designed to supplement the information provided by the House and Senate Appropriations Subcommittees on Legislative Branch Appropriations.

None

In this report, we discuss the logistics and estimate the delivered costs for collecting, handling, and hauling corn stover to an ethanol conversion facility. We compare costs for two conventional baling systems (large round bales and large rectangular bales), a silage-harvest system, and an unprocessed-pickup system. Our results generally indicate that stover can be collected, stored, and hauled for about $43.60 to $48.80/dry ton ($48.10-$53.80/dry Mg) using conventional baling equipment for conversion facilities ranging in size from 500 to 2000 dry tons/day (450-1810 dry Mg/day). These estimates are inclusive of all costs including farmer payments for the stover. Our results also suggest that costs might be significantly reduced with an unprocessed stover pickup system provided more efficient equipment is developed.

An aggressive attack in the management of malignant disease by chemotherapeutic means has been hampered by toxic effects of these agents on bone marrow, gastrointestinal tract, and skin.

The Brookhaven Bubble Chamber Group is developing a Hough-Powell fast analysis system (HPD)1 for bubble chamber photographs. High precision measurements are made with a computer controlled flying spot digitizer. We are currently testing the track selection programs for the system. We have just completed a study of a method for automatic bubble density measurements.