This is a progress report on the work of ore tressing and pyrometallurgical studies as well as a study of chemical work on phosphates. This report covers the month of November, 1947.

"An investigation of the spin and recovery characteristics of a 1/24-scale model of the McDonnell XP-88 airplane has been conducted in the Langley 20-ft free-spinning tunnel. Results of tests with a conventional tail have been previously reported; the results presented herein are for the model with a vee tail installed. The effects of control settings and movements on the erect and inverted spin and recovery characteristics of the model. In the normal loading were determined" (p. 1).

This report for November, 1947 describes progress regarding chemical work on shales and organic precipitants for uranium.

This report presents the building and design philosophy of Building 234-5 at the Hanford site.

From Summary: "A blade-element theory for axial-flow compressors has been developed and applied to the analysis of the effects of basic design variables such as Mach number, blade loading, and velocity distribution on compressor performance. The relations among several efficiencies useful in compressor design are derived and discussed. The possible gains in useful operating range obtainable by the use of adjustable stator blades are discussed and a rapid approximate method of calculating blade-angle resettings is shown by an example."

Report presenting an analysis of the spanwise loading using two different methods on the wing of an airplane for which pressure-distribution measurements were available from flight tests up to a Mach number of 0.866. A comparison between measured and calculated distributions was made on the basis of equal wing-panel normal-force coefficients.

Report presenting the results from tank landing and take-off tests with a dynamic model of a hypothetical jet-propelled airplane equipped with NACA hydro-skis. Results regarding landing tests, take-off tests, and practical considerations for the creation of hydro-ski configurations are provided. The hydro-skis suitable for flush retraction into streamline fuselages do appear to offer a practical means of water take-offs and landings.

Report presenting calculations based on a theoretical analysis for a composite engine consisting of a uniflow two-stroke-cycle spark-ignition engine, a compressor, a blowdown turbine, and a steady-flow turbine. Operation of the engine is considered for four cases of gas mixtures and steady-flow turbine temperatures.

This memorandum confirms previous verbal answers to the questions presented by the 234-5 Design group for clarification regarding Specification Letters 234-1, 235-1, 234-2 and 234-3. Testing, plutonium concentration in air, equipment modifications and process control are among items addressed.

Report discussing experiments to "determine the empirical relation, if any, between the nitrogen, carbon, and density of recast uranium metal."

None

"An investigation of the low-speed, power-off stability and control characteristics of a 1/20-scale model of the Consolidated Vultee XB-53 airplane has been conducted in the Langley free-flight tunnel. In the investigation it was found that with flaps neutral satisfactory flight behavior at low speeds was obtainable with an increase in height of the vertical tail and with the inboard slats opened. In the flap-down slat-open condition the longitudinal stability was satisfactory, but it was impossible to obtain satisfactory lateral-flight characteristics even with the increase in height of the vertical tail because of the negative effective dihedral, low directional stability, and large-adverse yawing moments of the ailerons" (p. 1).

"At the request of the Air Materiel Command, Army Air Forces, an investigation of the low-speed, power-off, stability and control characteristics of the McDonnell XP-85 airplane has been conducted in the Langley free-flight tunnel. The results of the portion of the investigation consisting of tests of a 1/10-scale model to study the stability of the XP-85 when attached to the trapeze and during retraction into the B-36 bomb bay are presented herein. In the power-off condition the stability was satisfactory with all oscillations well damped and the nose-restraining collar could be placed in position without difficulty" (p. 1).

None

The following report summarizes research done on dissolving uranium from phosphate rock and superphosphate and recovering it from solution in a more concentrated form.

Theoretical pressure distributions and measured lift, drag, and pitching moment characteristics at three values of Reynolds number are presented for a group of NACA four-digit-series airfoil sections modified for high-speed applications. The effectiveness of flaps applied to these airfoils and the effect of standard leading-edge roughness were also investigated at one value of Reynolds number. Results are also presented of tests of three conventional NACA four-digit-series airfoil sections.

Report presenting an investigation of the problem of applying controls to low-aspect-ratio wings of triangular plan form by using the NACA wing-flow method with parallel-sided models with sharp leading and trailing edges. Results regarding the data analysis, Reynolds number and separation effects, flap effectiveness, plan-form characteristics, angle of zero lift, and triangular plan-form flying-wing characteristics are provided.

From Summary: "Tests were made to fill partly the need for information on the effect of afterbody dimensions on the hydrodynamic stability of a flying boat in smooth water. The dimensions investigated were depth of step, angle of afterbody keel, and length of afterbody. An analysis of the data showed that as either the afterbody length or keel angle was increased an accompanying increase in depth of step was required in order to maintain adequate landing stability."

Report presenting an investigation of the low-speed characteristics of a 25-foot span triangular wing with an aspect ratio of 2. the airfoil section of the wing was a symmetrical double wedge with 5-percent maximum thickness at 20-percent chord. Results regarding the longitudinal characteristics, lateral characteristics, and directional characteristics are provided.

Report presenting an investigation of the effect of tip shape on the aerodynamic characteristics of large-scale 45 degrees swept-forward and 45 degrees swept-back wings. The results show that none of the variations of tip shape investigated nor the addition of bodies of revolution at the tips produced major changes in the characteristics of the swept wings.

Report presenting tests in a pressure tunnel to determine the low-speed pitch characteristics of a 42 degree sweptback wing with circular-arc airfoil sections. Information regarding the characteristics of basic wing, leading-edge flap investigation, and effects of fuselage are provided.

An altitude-wind-tunnel investigation of a TG-100A gas turbine-propeller engine was performed. Pressure and temperature data were obtained at altitudes from 5000 to 35000 feet, compressor inlet ram-pressure ratios from 1.00 to 1.17, and engine speeds from 800 to 13000 rpm. The effect of engine speed, shaft horsepower, and compressor-inlet ram-pressure ratio on pressure and temperature distribution at each measuring station are presented graphically.

"As part of an investigation of the performance and operational characteristics of the TG-100A gas turbine-propeller engine, conducted in the Cleveland altitude wind tunnel, the performance characteristics of the compressor and the turbine were obtained. The data presented were obtained at a compressor-inlet ram-pressure ratio of 1.00 for altitudes from 5000 to 35,000 feet, engine speeds from 8000 to 13,000 rpm, and turbine-inlet temperatures from 1400 to 2100R. The highest compressor pressure ratio was 6.15 at a corrected air flow of 23.7 pounds per second and a corrected turbine-inlet temperature of 2475R" (p. 1).

Report discussing testing of a model of the pilotless aircraft RM-1 to measure aileron hinge moments in flight in order to determine the reason for loss of roll stabilization at supercritical speeds in flight. The aileron was found to become quickly underbalanced over the full deflection range at supercritical speeds. Information about the general flight behavior, aileron hinge moments, and roll stabilization of the model is provided.