From abstract: "A method for fabricating 30-in.-long stainless steel - uranium dioxide sheet was developed and the properties of the fabricated sheet were investigated."

Abstract: "The elastic double scattering of deuterons by complex nuclei has been investigated experimentally. Measurements were made on carbon, aluminum, and copper at around 157 Mev; on lithium, beryllium, and carbon at around 125 Mev; and on carbon and aluminum at 94 Mev. The expected tensor components of the deuteron polarization have not been observed. Measurements have been made of the differential cross section and vector-type polarization as a function of angle for the scattering of deuterons from the above elements, at the above energies. The observed polarizations were larger than would be expected on the basis of the individual nucleon-nucleus interactions. In a second experiment we measured the 169-Mev proton-proton polarization at 10, 15, 22.5, 30, and 35 in the laboratory system. The results indicate that partial waves up to and including L = 3 are important at this energy."

This report presents the best estimate possible on the basis of the available information as to how high an energy would be necessary in order that the gas pressure which could be tolerated would be attainable with present techniques (say 10-(-7) mm Hg.)

The following report analyzes several reported incidents of uranium-rich zirconium-uranium explosions. This report offers notes designed to describe conditions sufficient to cause an explosion with an 80% wt. uranium alloy.

Gradual corrosion and mechanical wear of equipment over a period of years has affected the seals and gasketing of the electric pot calcining equipment in the 224-U Building Cell E to such an extent that the desirable vacuum cannot be maintained in the pots. Air contamination has been gradually increasing, and this, together with a lowering of the mask working limits, has made it necessary to require personnel to wear assault masks continuously. Indications are that, with the increased production now required, the level of air contamination will continue to rise unless measures are taken to prevent it. The Manufacturing Department has requested that a project be established to reduce the contamination level. Several items of improvement are listed for consideration including, in general, the electric pot agitation and sealing, semi-automatic pot unloaders, cell ventilation and air locks, and the nitric acid off-gas system and stacks. Because of the urgency of improving the conditions, the project, at first, is to provide for immediate improvements for the electrical pot agitation, the pot cover leakage, and the nitric acid off-gas system and stack. Additional study will be required to determine the extent of the ventilation and semi-automatic unloading improvements required.

The state of polonium in aqueous solutions was investigated by means of ion exchange equilibrium studies. The distribution of the polonium between the solid and liquid phases was determined for solutions of various compositions using both a cation and an anion exchanges. These studies show that in the absence of a complexing agent polonium is hydrolyzed to such a degree that it forms monovalent cations and anions whose charge was not investigated in this study.

This report describes the evaluation of physical properties of AGHT and 185-W graphites that are important to pile construction and operation. On the basis of these data, purified AGHT graphite was allocated to either filler block positions in the central regions of the K piles or to the upper or lower reflectors. This decision was based on the similarities of physical properties between AGHT graphite and the other moderator components. A similar allocation could be made for 185-W graphite for some future pile if it can be successfully purified or if purification is not required.

Because of the excessive vertical fragility and high replacement costs of mice-window G-M tubes used in vertical and horizontal lead-pig shelf counters, it was requested that a simple system of conversions to reliable scintillation detection be accomplished.

A large (size 2) Purex pulse generator was installed in the 321 Building Tan Farm to pulse solutions in the prototype Purex HA Column. Flow sheet considerations indicated a need for information on leakage rates with various size weep holes in the pulse generator piston. In addition to leakage tests, experiments were conducted to determine the air required under the piston to hold the column contents away from the pulse generator piston thereby preventing leakage during shut down and the determine the time required to bleed the air trapped in the pulse leg when the column is first filled. [...] Leakage past the piston was not appreciably affected by pulse frequency. [..] Bleeding the air out of the pulse leg under start-up conditions, even with the piston weep hole plugged, was rapid. The longest time required to bleed the pulse leg was 36 minutes, which included a column-filling time of 30 minutes.

The technique of high-frequency titrimetry has been applied to the determination of thorium, uranium, sulfate, and free acid. In Part I of this report, the reproducibility of the method for the titration of standard solutions which contained 50mg of thorium in the absence of interferences is established. The coefficient of variation of the method, under these conditions, was found to be less than one per cent. In Part II, the effect of uranium on the high-frequency titration of thorium, as well as the application of the method to actual samples, is discussed. Uranium in a ratio of 5 to 1 to thorium can be tolerated. When the method is applied to the analysis of representative samples, the coefficient of variation is one per cent.

After two batches (~ 340 kg) of fluoride salt from the ARE were reprocessed, pilot plant operations were terminated because of a leak through which an estimated 780 g of uranium (as UF6) escaped. Of the 21 kg of highly enriched uranium in the feed, 93.12% was collected as UF6 product, 0.13% represented measured losses, and 3.72% was unaccounted for (leak). An additional 3.03% was reclaimed from NaF beds and equipment washes. The product met both chemical purity and activity specifications for product level UF6. Decontamination from fission products was essentially complete. A gross gamma D.F. was apparently limited by the low activity of the feed salt.

Sanderson & Porter have carried out a series of studies over the last four years which indicate that the pebble-bed reactor way be an attractive way to obtain low-cost power. At the request of the Atomic Energy Commission, two design studies have been carried out on this concept at the Oak Ridge National Laboratory. The first of these a preliminary design of a 10-Mw(t) reactor experiment, the PRRE, was initiated September 10, and a report on the study was issued November 1960. The second phase of the work, a conceptual design study of a 330-Mw (e) central station, was initiated November 1, and is the subject of this report.