Memorandum presenting pulse techniques applied to strain gages for increasing the output level and extending the usable range. Bonded and unbonded strain gages which normally operate with exciting potentials between 3.5 and 14 volts operated satisfactorily with 200-volt pulses of 1-microsecond duration and a repetition rate of 350 per second. Results regarding maximum allowable voltages, effective pulse duration, sensitivity, minimum readable signal, effects of cable capacitance and inductance, sensitivity to external noise, and linearity are provided.

Report presenting an investigation of a model of the Republic F-105 airplane to determine the static longitudinal aerodynamic characteristics of a revised configuration. The revisions included a lengthened fuselage, a relocated canopy, a contoured fuselage afterbody, a ventral fin, and an enlarged vertical tail. Results regarding the effect of stores, effect of dive-brake flaps, effect of forebody modifications, gun blisters, and duct air bleed, and a comparison of the modified model with the original are provided.

"An investigation has been made of a partial-span model of the tail surface designed for use on the Hughes Falcon (MX-904) missile to determine the aerodynamic characteristics of the tail and elevator including elevator hinge moment. Data obtained at Mach numbers of 1.62 and 1.96 in the Langley 9- by 12-inch supersonic blowdown tunnel are presented for the condition where the tail was attached to a segment of the foreshortened body" (p. 1).

"A description of the two swept propellers investigated in the Langley 8-foot high-speed tunnel is presented, together with the discussions of the numerous assumptions and analyses on which the designs of these propellers are based. The blades are swept considerably along the entire blade radius and, in order to allow for reductions in the maximum stresses, are swept forward inboard and backward outboard. The blades have been designed on the basis of the blade-element method primarily to have subcritical efficiencies at the highest possible forward speed. The designs have been controlled primarily by the stresses in the blades" (p. 1).

This report contains a selected list of Government sponsored research projects on related aircraft materials in effect during the calendar year 1947. Information is contained on titles, description, sponsoring and conducting agencies.

A general representation of fan and turbine arrangements on a single classification chart is presented that is made possible by a particular definition of the stage of an axial-flow fan or turbine. Several unconventional fan and turbine arrangements are indicated and the applications of these arrangements are discussed.

A survey of experimental data at supersonic speed indicated that shock-induced separation of a turbulent boundary layer will result for Mach numbers of approximately 1.33 or greater when a theoretical stream static-pressure-rise ratio of approximately 1.89 occurs across a shock interacting with the boundary layer. The significance of this tentative criterion for turbulent boundary-layer separation is discussed with respect to the design of supersonic diffusers.

Report presenting the ignition delays of propane-oxygen-nitrogen mixtures as a function of temperature and composition in a flow system. Results regarding the effect of apparatus parameters, effect of propane concentration, effect of oxygen concentration, effect of temperature, and interpretation in terms of slow reaction kinetics are provided.

Memorandum presenting an investigation of the effect of the addition of approximately 6 percent nickel, cobalt, or platinum on some properties of molybdenum disilicide. These additions resulted in appreciably lowering the modulus-of-rupture strength from that of unalloyed molybdenum disilicide. Results regarding density and particle-size analysis, chemical analysis of bars, metallographic and x-ray analysis, density and resistivity, modulus-of-rupture strengths, thermal shock tests, and oxidation resistance are provided.

Report presenting an investigation of a silicone-diester blend (SD-17) in various bench studies and in a turbopropeller engine to determine its suitability as a lubricant for aircraft engines. The performance of the fluid was satisfactory during more than 17 hours of operation in a T-38 engine with power levels from 1745 to 2400 horsepower. Results regarding bench studies and turbopropeller engine study are provided.

Formulas are given for the propelling or drag force experience in a uniform air stream by an airfoil or an airfoil-aileron combination, oscillating in any of three degrees of freedom; vertical flapping, torsional oscillations about a fixed axis parallel to the span, and angular oscillations of the aileron about a hinge.

"The tests discussed in this report were conducted to determine whether or not there is appreciable vaporization of the fuel injected into a high-speed compression-ignition engine during the time available for injection and combustion. The effects of injection advance angle and fuel boiling temperature were investigated. The results show that an appreciable amount of the fuel is vaporized during injection even though the temperature and pressure conditions in the engine are not sufficient to cause ignition either during or after injection, and that when the conditions are such as to cause ignition the vaporization process affects the combustion. The results are compared with those of several other investigators in the same field" (p. 629).