"Flow coefficients were determined for the inlet valve of a modern air-cooled cylinder during operation of the valve. The cylinder head with valves was mounted on a large tank that could be evacuated. Operating the valve with a rotating cam allowed air to flow through the valve into the evacuated tank. The change of pressure in the tank was a measure of the amount of air flowing though the valve in a given number of cycles. The flow coefficients were determined from the pressure across the valve, the quantity of air flowing, and the valve-lift curve" (p. 1).

"Propellers with equal total blade area, but with different numbers, were tested at Stanford University. The tests show generally that, for equal total blade area, propellers with the larger number of blades absorb the greater power and, provided hubs have equal drag, develop the higher efficiency. It is shown that the differences found are in agreement, qualitatively, with what might be predicted from simple blade-element theory" (p. 1).

Section aerodynamic characteristics of a large-chord N.A.C.A. 23012 airfoil with a slotted deflector flap were obtained in the N.A.C.A. 7- by 10-foot wind tunnel. The characteristics of an N.A.C.A. slotted flap and of a simple split flap are included for comparison. The slotted deflector flap was found to have a somewhat lower maximum lift coefficient and somewhat higher drag at high lift coefficients than the N.A.C.A. slotted flap. The high drag of the open slot with the deflector flap neutral indicates that the slot should be closed for this condition.

"Methods of automatically controlling the airplane are reviewed. Equations for the controlled motion including inertia effects of the control are developed and methods of investigating the stability of the resulting fifth and higher order equations are presented. The equations for longitudinal and lateral motion with both ideal and non-ideal controls are developed in dimensionless form in terms of control parameters based on simple dynamic tests of the isolated control unit" (p. 1).

Four N.A.C.A. 23012 wings were tested at several angles of yaw in the N.A.C.A. 7- by 10-foot wind tunnel. All the wings have rounded tips and, in plan form, one is rectangular and the others are tapered 3:1 with various amounts of sweep. Each wing was tested with two amounts of dihedral and with partial-span split flaps. The coefficients of lift, drag, and pitching moment are given for all the models at zero yaw. The coefficients of rolling moment, yawing moment, and side force are given for the rectangular wing at all values of yaw tested. The rate of change in the coefficients with angle of yaw is given in convenient form for stability calculations.

Note presenting tests of several forms of fixed wing slot in a large-chord NACA 23012 airfoil in the closed-throat 7- by 10-foot wind tunnel. The airfoil extended completely across the test section so that two-dimensional flow was approximated. The data are presented in the form of tables of important aerodynamic characteristics for each slot tested and as curves of section lift, profile-drag, and pitching-moment coefficients.