Abstract. Measurements were made to determine the effect of thermal cycling on heat transfer from slug to jack using a slug with a sand blasted surface. The value of the transfer coefficient h decreased from initial values ranging from 10 to [formula], to values and [formula] after 1700 cycles, and to a range of 0.15 to 0.45 [formula] after 3200 cycles. Comparisons are made with the results found for slugs with different surfaces.

Abstract: Cadmium ratios for very thin (neutron and beta-wise) foils of thorium, gold, vanadium and indium have been measured in the glory hole of the WBNS. These cadmium ratios, together with the known thermal cross sections and a given calculated resonance integral for gold, were used to evaluare the resonance integrals of thorium, vanadium, and indium.

Report describing a study regarding the solubility and related properties of tributyl phosphate (TBP), which has lower solubility in water than most uranium solvents. Pure TBP and TBP in an inert diluent were tested for solubility in water, several nitric acid solutions of varying concentrations, and other solutions typical of process streams. For TBP-diluent-water system tests, equilibrium water content in organic phase was found.

"This work is a continuation of an investigation begun in January, 1945, on a laboratory study of various methods for the chlorination of TO3. The work carried out this month deals entirely with gas phase chlorination, the liquid phase chlorination of TO3 having been turned over to Miss Hubbard. Gas phase chlorination of TO3 by means of CCl4, S2Cl2, SOCl2, SO2Cl2, and Cl2 have been carried out under varying conditions in the several different types of reactors."

A report about elevated-temperature tensile properties of dilute uranium alloys. Alloys up to 2 a/o aluminum and 4 a/o zirconium have been fabricated to rod and are being tested at temperatures up to 500 C.

Description of a velocity analyzer (with diagrams) is given. It is a device for measuring the velocities of charged particles which comprises pairs of spaced electrodes, a collector for charged particles, and means for propelling charged particles in a direction so as to pass between the pairs of electrodes. The pairs of electrodes and the collector are so arranged to permit passage of the charged particles between them to the collector plate. Means are provided for applying an alternating substantially square wave potential of known frequency to the pairs of electrodes so that adjacent pairs are opposite in phase and so that one half-cycle of the wave appears as zero potential between the pairs of electrodes.

From abstract: "A description is given of a simple circuit used to produce negative voltage pulses up to 60 kilovolts with a portion rising with constant slope up to 10 kilovolts per microsecond."

Uranium carbide shows promise as a fuel material for reactors operating at relatively high temperatures based on its high melting point, high uranium density and high thermal conductivity. Before refined reactor designs can be made, however, good quantitative data on the thermal conductivity at temperatures in excess of 1000C is required. This technical report presents data gathered as part of a continuing study aimed at determining the thermal conductivity of refractory uranium fuels as a function of temperature, density and composition over the temperature range 1000-2200C. At the inception of this program it was felt that an absolute method capable of achieving high temperatures was necessary and that the difficulties encountered in fabricating the large complex specimens needed were justified. The steady state radial heat flow method and apparatus of Rasor and McClelland were therefore chosen. The technical report discusses the experimental equipment and presents results of measurements on three specimens of UC over a temperature range 900 to 1600C. An analysis of the data is made with respect to other physical properties of the material and the measured conductivities are compared with the work of other investigators.

The operating lives of Redox Process mechanical equipment are given. Tables are included which give the operating hours, reason for failure, position, and original date installed.

The purpose of this letter is to point out certain discrepancies between previous work on the decay of Rb82 (6.3 hour, B+, K-capture) and studies made recently at the University of California Radiation Laboratory.

A letdown valve design is described which reduces erosion of the sealing surfaces. It also provides for water flushing of the sealing surface before closing.

.Recalculations were made of HRT cell pressures in the event of a simultaneous rupture of the reactor core vessel and the fuel and blanket heat exchangers. These calculations will be applicable after the replacement fuel heat exchanger is installed. The pressure rise in the cell is plotted as a function of time. A maximum cell pressure of 34 psig is achieved ~7 sec after rupture.