Report presenting an extensive metallographic examination of a group of buckets overtemperatured in service. Most of the buckets showed an overaged microstructure. Results regarding the metallographic survey and stress-rupture tests are provided.

From Introduction: "In the present report, the concept of velocity diffusion is applied in an analysis of blade losses expressed in terms of the fundamental parameter of wake momentum thickness. Restrictions and limitations involved in the application of the results to cascade performance analyses are discussed."

Report presenting an investigation in the high-speed tunnel to determine the static aerodynamic forces and moments on a missile model during simulated launching from midsemispan locations of various types of wings. The purpose of the investigation is to determine the nature and origin of the mutual interference experienced by various combinations of wing-fuselage models and externally carried missiles. Results regarding isolated missile characteristics, the effect of varying chordwise position, effects of angle of attack and Mach number, effect of airplane wing geometric characteristics, effect of missile spanwise location, and comparison of wing-fuselage and fuselage effects on the missile forces and moments are provided.

Wedge and scoop air inlet performance and thrust minus drag comparisons at free stream in supersonic wind tunnel test.

Two normal -wedge-inlet configurations (straight and sweptback splitter plates) were investigated in the Lewis 8- by 6-foot supersonic wind tunnel at Mach numbers of 1.50 to 1.99. Negligible differences occurred in the performances of the two normal-wedge inlets. In comparison with a previously tested scoop inlet, the normal-wedge configuration showed superior thrust-minus-drag characteristics at Mach 1.99. However the scoop inlet was better at Mach numbers of 1.80 and 1.50.

Report presenting a wind-tunnel investigation at Reynolds numbers of about 7,000,000 based on the mean aerodynamic chord of the wing and over a range of Mach numbers. Two airfoils were tested to evaluate the effect of a large leading-edge radius with increased thickness over the forward 40 percent of the chord on the reliability of the predictions of the supersonic area rule. Results regarding the comparison of basic- and modified-wing models, comparison of experimental and computed drag coefficients, and a comparison of indentations are provided.

Report presenting a free-flight rocket-propelled model investigation at Mach numbers from 1.2 to 1.9 to determine the longitudinal and lateral aerodynamic characteristics of a low-drag aircraft configuration. Aerodynamic data in pitch, yaw, and roll were obtained from transient motions induced by small pulse rockets firing at intervals.

Memorandum presenting the performance of a scoop-type inlet on the bottom of a body of revolution at several Mach numbers and angles of attack. The investigation included a study of the effects of altering the approach surface ahead of the inlet, extending the boundary-layer splitter plate, and bleeding air at the throat and exit of the diffuser.

Memorandum presenting a study of the performance of a scoop-type inlet on the bottom of a body of revolution at a range of Mach numbers and angles of attack to 10 degrees. The investigation included a study of the effects of altering the approach surface ahead of the inlet, extending the boundary-layer splitter plate, and bleeding air at the throat and exit of the diffuser. Results regarding the flow survey ahead of the inlet, alternative configurations, internal-flow details of the basic configuration, air bleed at the throat, and air bypass at the engine face are provided.

Report presenting testing of several underslung scoop-type inlets mounted on a body of revolution at several Mach numbers through a range of angles of attack. Geometric differences between inlets included ramp angle, frontal area, splitter-plate height, and aspect ratio. Results regarding inlet stability, peak pressure recoveries, and total-pressure distortions are provided.

Report presenting an investigation of the performance of pentaborane fuel in a flight-type, 9.75-inch-diameter ramjet engine mounted in a connected-pipe altitude facility. Combustor efficiency was above 85 percent throughout the range of test conditions. Results regarding the connected-pipe performance and estimated flight performance are provided.

Report presenting a flight investigation to determine the static-pressure errors for nose-boom airspeed installations of 17 airplanes. Both research-type and service-type aircraft are covered in the investigation. Results indicated that the magnitude of static-pressure errors for the airspeed installations of all the airplanes is shown to vary with airplane geometric characteristics that include nose-boom length, fuselage diameter, and nose fineness ratio.

Report presenting an investigation of an axial-flow compressor rotor with an inlet hub-tip radius ratio of basically zero. Results regarding the radial distribution of total-pressure ratio and efficiency, measured pressure ratio at design speed, weight flow, and low-speed cascade data are provided.

Report presenting an investigation of the static lateral stability characteristics of a swept-wing fighter-type airplane with three vertical-tail configurations and two wing configurations at an altitude of 40,000 feet over a range of Mach numbers. Data was obtained in several conditions, including constant-heading sideslips and wings-level turns, aileron rolls, and abrupt rudder pulses. Results regarding the sideslip characteristics, lateral control, and control effectiveness derivatives are provided.

From Summary: "The manner in which imperfect space stabilization of the tracking radar influences the flight path stability of an automatic interceptor during the attack phase is illustrated by means of flight and analog-computer time histories. It is shown analytically that these effects may be interpreted in terms of a destabilizing airplane rate feedback which can be canceled by an additional compensatory feedback in the radar tracking loop."

A preliminary investigation was conducted to determine the combustion characteristics of a fuel composed of 50 percent pentaborane and 50 percent JP-4 (MIL-F-5624A) by weight in a turbojet combustor. A combustor designed to fit the housing of a J33-A-23 turbojet engine was selected for convenience. The fuel was evaluated at two engine conditions simulating altitudes of 40,000 and 57,000 feet, an engine speed of 85 percent of rated rpm, and a flight Mach number of 0.6. The pentaborane blend was initially evaluated in combustors developed for pure pentaborane and diborane reported in NACA RM E53B18 and RM E52L15. The performance of the blend was unsatisfactory in these combustors. A new combustor was then developed which provided combustor efficiencies measured from 91 to 101 percent as compared with efficiencies of 92 to 94 percent previously obtained for pentaborane at comparable conditions. Additional refinements of design details are needed to obtain lower oxide deposits and a more uniform outlet temperature profile; however, the combustor is believed to incorporate some of the design principles required to obtain satisfactory over-all performance with the fuel blend investigated.

Memorandum presenting a single J33 combustor and an experimental tubular combustor incorporating a fuel vaporizer as operated with gaseous hydrogen at temperatures slightly above the boiling point of the fuel. Data were obtained to explore possible effects of the fuel temperature on combustor performance and on the control and measurement of fuel flow.

Report presenting an investigation of a free-flight test vehicle to obtain boundary-layer-transition and heat-transfer data. The model had a 15-degree-included-angle cone-cylinder and a 10 degree conically flared afterbody. Results regarding the free-stream conditions, conditions at outer edge of boundary layer, temperatures and heat-transfer coefficients, and boundary-layer stability conditions are provided.

Memorandum presenting a survey of the present status of theory in the field of slip-flow aerodynamics, which leads to the conclusion that the Navier-Stokes equations of motion together with first-order velocity slip and temperature jump at any boundary are sufficient insofar as experimental confirmation is available.

Report presenting an investigation to determine the reductions in temperature-recovery factor associated with pulsating flows generated by spike-nose cylinders. The investigation was conducted at zero angle of incidence at a free stream Mach number of 3.50 and a free stream Reynolds number of 1.73 million.

Report presenting testing of a series of rocket-propelled general-research test missiles incorporating cruciform delta wings mounted along the diagonals of a fuselage of square cross section used to obtain longitudinal trim in flight. Several combinations of controls and static and dynamic longitudinal stability of the missiles were tested at a range of Mach numbers.

From Summary: "Data were obtained with five exhaust-nozzle areas and with the variable-area exhaust nozzle interlinked with the control system at conditions simulating flight at a Mach number of 0.8 and altitudes of 35,00 and 45,000 feet. Data simulating operation at zero flight Mach number at an altitude of 15,000 feet are also included. Engine component performance data are presented in addition to the overall engine performance."

From Introduction: "The general objective of this report is a study of the characteristics of the described form of peak holding control. The control has not yet been used in experimental turbojet-engine study.This study is concerned with only one method of extracting the maximum amount of information from a peak output for the purpose of maintaining that peak. The criteria sought in this control process are: maintenance of peak average output, minimum duration of time in undesirable operation, quickness in response to command to reach peak condition, least amount of excursion in the undesirable region, and type of stability."

Memorandum presenting a modified group method used to calculate the reactivity of the uranyl-fluoride-water experimental critical assemblies which are part of the Oak Ridge critical mass studies. The method relates the experimental slowing-down length for water to that in fluoride solutions and includes the effects of epithermal absorption and fission.