6,554 Matching Results

Results open in a new window/tab.

Delayed Failure Hydrogen Embrittlement of Zirconium. Quarterly Report No. 2, December 15, 1961 to March 14, 1962 (open access)

Delayed Failure Hydrogen Embrittlement of Zirconium. Quarterly Report No. 2, December 15, 1961 to March 14, 1962

The purpose of this investigation is to determine the extent to which Zr and Zr alloys exhibit delayed failure (static fatigune) as caused by a combination of absorbed H and applied stress. Both notched and unnotched specimens of unalloyed Zr and Zircaloy-2 were hydrogenated to 200 ppm and 500 ppm by means of a modified Sieverts apparatus; specimens were evaluated at room temperature. Thus far, no time-dependent fracture was observed which can be attributed to the delayed failure phenomenon; it appears that these materials are relatively insensitive to static fatigune. The effects of grain size, temperature, cold deformation, and superheated water and steam corrosion on susceptibility to delayed failure are being determined. (auth)
Date: March 30, 1962
Creator: Weinstein, D. & Holtz, F. C.
Object Type: Report
System: The UNT Digital Library
KINETIC EXPERIMENTS ON WATER BOILERS, "A" CORE REPORT. PART I. PROGRAM HISTORY, FACILITY DESCRIPTION, AND EXPERIMENTAL RESULTS (open access)

KINETIC EXPERIMENTS ON WATER BOILERS, "A" CORE REPORT. PART I. PROGRAM HISTORY, FACILITY DESCRIPTION, AND EXPERIMENTAL RESULTS

None
Date: March 30, 1962
Creator: Flora, J.W.; Gardner, E.L.; Greenfield, M.A.; Roecker, J.H. & Stitt, R.K.
Object Type: Report
System: The UNT Digital Library
Determination of performance criteria for high-level solidified nuclear waste from the commercial nuclear fuel cycle: a probabilistic safety analysis (open access)

Determination of performance criteria for high-level solidified nuclear waste from the commercial nuclear fuel cycle: a probabilistic safety analysis

To minimize the radiological risk from the operation of a waste management system for the safe disposal of high-level waste, performance characteristics of the solidified waste form must be specified. The minimum waste form characteristics that must be specified are the radionuclide volatilization fraction, airborne particulate dispersion fraction, and the aqueous dissolution characteristics. The results indicate that the pre-emplacement environs are more limiting in establishing the waste form performance criteria than the post-emplacement environs. The actual values of expected risk are sensitive to modeling assumptions and data base uncertainties. The transportation step appears to be the most limiting in determining the required performance characteristics.
Date: March 30, 1978
Creator: Heckman, R.A.
Object Type: Article
System: The UNT Digital Library
Stress Analysis of the SM-1A Reactor Vessel (open access)

Stress Analysis of the SM-1A Reactor Vessel

The stress analysis performed on the SM-lA reactor vessel and cover is presented. The msximum combined stress (51,360 psi in compression) occurs in the vessel cover during a 50 deg F/hr transient. A fatigue analysis of these stresses indicated that they could be applied safely at least 2500 times, and since the vessel is expected to receive less than 900 cycles, it should not suffer any fatigue damage. (auth)
Date: March 30, 1962
Creator: McLaughlin, D. W.; Rowekamp, B. J.; Chittum, R. A. & Aitken, C. C.
Object Type: Report
System: The UNT Digital Library
3D field harmonics (open access)

3D field harmonics

We have developed an harmonic representation for the three dimensional field components within the windings of accelerator magnets. The form by which the field is presented is suitable for interfacing with other codes that make use of the 3D field components (particle tracking and stability). The field components can be calculated with high precision and reduced cup time at any location (r,{theta},z) inside the magnet bore. The same conductor geometry which is used to simulate line currents is also used in CAD with modifications more readily available. It is our hope that the format used here for magnetic fields can be used not only as a means of delivering fields but also as a way by which beam dynamics can suggest correction to the conductor geometry. 5 refs., 70 figs.
Date: March 30, 1991
Creator: Caspi, S.; Helm, M. & Laslett, L.J.
Object Type: Report
System: The UNT Digital Library
Ocean thermal energy. Quarterly report, January-March 1982 (open access)

Ocean thermal energy. Quarterly report, January-March 1982

This quarterly report summarizes work of the following tasks as of March 31, 1982: OTEC pilot plant conceptual design review; OTEC methanol; review of electrolyzer development programs and requirements; financial and legal considerations in OTEC implementation; potential Navy sites for GEOTEC systems; hybrid geothermal-OTEC power plants: single-cycle performance estimates; and supervision of testing of pneumatic wave energy conversion system.
Date: March 30, 1982
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Mirror Fusion Test Facility: an intermediate device to a mirror fusion reactor (open access)

Mirror Fusion Test Facility: an intermediate device to a mirror fusion reactor

The Mirror Fusion Test Facility (MFTF-B) now under construction at Lawrence Livermore National Laboratory represents more than an order-of-magnitude step from earlier magnetic-mirror experiments toward a future mirror fusion reactor. In fact, when the device begins operating in 1986, the Lawson criteria of ntau = 10/sup 14/ cm/sup -3/.s will almost be achieved for D-T equivalent operation, thus signifying scientific breakeven. Major steps have been taken to develop MFTF-B technologies for tandem mirrors. Steady-state, high-field, superconducting magnets at reactor-revelant scales are used in the machine. The 30-s beam pulses, ECRH, and ICRH will also introduce steady-state technologies in those systems.
Date: March 30, 1983
Creator: Karpenko, V.N.
Object Type: Article
System: The UNT Digital Library
Compressed air systems. A guidebook on energy and cost savings (open access)

Compressed air systems. A guidebook on energy and cost savings

This guidebook shows how energy can be saved in compressed air systems. It discusses basic compressed air systems which are typical of those found in industry and describes them and the engineering practices behind them. Energy conservation recommendations follow. These recommendations cover equipment selection, design, maintenance, and operation. Included is information which will help the reader to make economic evaluations of various engineering and equipment alternatives as they affect operations and costs. The appendices include some modern computer based approaches to predicting pressure drop for designing compressed air distribution systems. Also included is a bibliography providing leads for further and more detailed technical information on these and related subjects.
Date: March 30, 1984
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Duct Systems in Large Commercial Buildings: Physical Characterization, Air Leakage, and Heat Conduction Gains (open access)

Duct Systems in Large Commercial Buildings: Physical Characterization, Air Leakage, and Heat Conduction Gains

None
Date: March 30, 1999
Creator: Fisk, William J.; Delp, Woody W.; Diamond, Rick C.; Dickerhoff, Darryl J.; Levinson, Ronnen M.; Modera, Mark P. et al.
Object Type: Article
System: The UNT Digital Library
Selective flotation of fossil resin from western coal (open access)

Selective flotation of fossil resin from western coal

Economic analysis of this fossil resin project mainly focused on the flotation plant which is intended to be designed with data obtained from the current proof-of-concept flotation test program. It is believed that the analysis of this step is fairly accurate. The other two economic aspects of fossil in resin recovery/utilization are refining and marketing. Cost data used for refining were from an estimated base and are believed to have a large variance. Marketing data used were obtained from two independent marketing studies which were made available on confidentiality basis. Nevertheless, the data used are believed to be fairly accurate with respect to the market potential.
Date: March 30, 1992
Creator: Jensen, G. F. & Miller, J. D.
Object Type: Report
System: The UNT Digital Library
[News Clip: Car plate] captions transcript

[News Clip: Car plate]

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.
Date: March 30, 1994, 10:00 p.m.
Creator: KXAS-TV (Television station : Fort Worth, Tex.)
Object Type: Video
System: The UNT Digital Library
[News Clip: Ballpark] captions transcript

[News Clip: Ballpark]

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.
Date: March 30, 1994, 5:00 p.m.
Creator: KXAS-TV (Television station : Fort Worth, Tex.)
Object Type: Video
System: The UNT Digital Library
A 3 TeV on 3 TeV proton-proton dedicated collider for Fermilab (open access)

A 3 TeV on 3 TeV proton-proton dedicated collider for Fermilab

The Fermilab Dedicated Collider proposed in May 1983 is a 2 TeV on 2 TeV p)bar p) collider. The expected luminosity is )approximately) 10/sup 31/ cm/sup (minus/2)sec/sup )minus/1) and the estimated cost is )approximately) $362M (FY-83 dollars). Since 1983 both the superconducting magnet and the particle detector technologies have advanced and the countenance of physics, hence the desired characteristics of new facilities have also altered somewhat. We want to show here that with the new magnet technology used for the SSC one can construct a 3 TeV on 3 TeV pp collider on the Fermilab site. This pp Dedicated Collider )PPDC) will have a luminosity of about 10/sub 33/cm/sup )minus/2)sec)sup)minus)1) and a cost only )approximately) 50)percent) more than that of the p)bar p) Dedicated Collider. 3 figs
Date: March 30, 1988
Creator: Teng, L.C.
Object Type: Report
System: The UNT Digital Library
Demonstration of a free piston Stirling engine driven linear alternator, phase I report (open access)

Demonstration of a free piston Stirling engine driven linear alternator, phase I report

The results of the work performed under Phase I of the free piston Stirling engine demonstrator program are described. The objective of the program is to develop a 2 kW free piston Stirling engine/linear alternator energy conversion system, for an isotopic heat source, with a greater than 30% overall efficiency. Phase I was a 15-month effort to demonstrate the feasibility of the system through analysis and experimental testing of the individual components. An introduction to Stirling engines and the details of the tasks completed are presented in five major sections: (1) introduction to Stirling engine; (2) preliminary design of an advanced free piston Stirling demonstrator engine; (3) design and test of a 1 kWE output linear alternator; (4) test of a model free piston Stirling engine; and (5) development of a free piston Stirling engine computer simulation code.
Date: March 30, 1977
Creator: Goldwater, B.; Piller, S.; Rauch, J. & Cella, A.
Object Type: Report
System: The UNT Digital Library
ORGANIC COOLANT REACTOR PROGRAM QUARTERLY REPORT, OCTOBER 1-DECEMBER 31, 1961 (open access)

ORGANIC COOLANT REACTOR PROGRAM QUARTERLY REPORT, OCTOBER 1-DECEMBER 31, 1961

Progress is reported on the organic-cooled reactor program under the topics: organic coolant research, EOCR experimental projects, and EOCR operations. Separate abstracts were prepared for each topic. (M.C.G.)
Date: March 30, 1962
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Ocean energy systems. Quarterly report, January-March 1983 (open access)

Ocean energy systems. Quarterly report, January-March 1983

Progress is reported on the development of Ocean Thermal Energy Conversion (OTEC) systems that will provide synthetic fuels (e.g., methanol), energy-intensive products such as ammonia (for fertilizers and chemicals), and aluminum. The work also includes assessment and design concepts for hybrid plants, such as geothermal-OTEC (GEOTEC) plants. Another effort that began in the spring of 1982 is a technical advisory role to DOE with respect to their management of the conceptual and preliminary design activity of industry teams that are designing a shelf-mounted offshore OTEC pilot plant that could deliver power to Oahu, Hawaii. In addition, a program is underway to evaluate and test the Pneumatic Wave-Energy Conversion System (PWECS), an ocean-energy device consisting of a turbine that is air-driven as a result of wave action in a chamber. This Quarterly Report summarizes the work on the various tasks as of 31 March 1983.
Date: March 30, 1983
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Taloga Times-Advocate (Taloga, Okla.), Vol. 28, No. 42, Ed. 1 Thursday, March 30, 1922 (open access)

Taloga Times-Advocate (Taloga, Okla.), Vol. 28, No. 42, Ed. 1 Thursday, March 30, 1922

Weekly newspaper from Taloga, Oklahoma that includes local, state, and national news along with advertising.
Date: March 30, 1922
Creator: unknown
Object Type: Newspaper
System: The Gateway to Oklahoma History
The Mangum Star. (Mangum, Okla. Terr.), Vol. 17, No. 39, Ed. 1 Thursday, March 30, 1905 (open access)

The Mangum Star. (Mangum, Okla. Terr.), Vol. 17, No. 39, Ed. 1 Thursday, March 30, 1905

Weekly newspaper from Mangum, Oklahoma that includes local, territorial, and national news along with advertising.
Date: March 30, 1905
Creator: Echols, R. C.
Object Type: Newspaper
System: The Gateway to Oklahoma History
Oklahoma State Register. (Guthrie, Okla.), Vol. 14, No. 13, Ed. 1 Thursday, March 30, 1905 (open access)

Oklahoma State Register. (Guthrie, Okla.), Vol. 14, No. 13, Ed. 1 Thursday, March 30, 1905

Weekly newspaper from Guthrie, Oklahoma Territory that includes local, territorial, and national news along with advertising.
Date: March 30, 1905
Creator: Golobie, John
Object Type: Newspaper
System: The Gateway to Oklahoma History
The Mangum Mirror (Mangum, Okla.), Vol. 1, No. 4, Ed. 1 Friday, March 30, 1917 (open access)

The Mangum Mirror (Mangum, Okla.), Vol. 1, No. 4, Ed. 1 Friday, March 30, 1917

Semi-weekly newspaper from Mangum, Oklahoma that includes local, state, and national news along with advertising.
Date: March 30, 1917
Creator: Ryder, J. W.
Object Type: Newspaper
System: The Gateway to Oklahoma History
The Oklahoma Democrat (Altus, Okla.), Vol. 9, No. 3, Ed. 1 Thursday, March 30, 1916 (open access)

The Oklahoma Democrat (Altus, Okla.), Vol. 9, No. 3, Ed. 1 Thursday, March 30, 1916

Weekly newspaper from Altus, Oklahoma that includes local, state, and national news along with advertising.
Date: March 30, 1916
Creator: unknown
Object Type: Newspaper
System: The Gateway to Oklahoma History
The Greer County Democrat (Mangum, Okla.), Vol. 26, No. 29, Ed. 1 Thursday, March 30, 1916 (open access)

The Greer County Democrat (Mangum, Okla.), Vol. 26, No. 29, Ed. 1 Thursday, March 30, 1916

Weekly newspaper from Mangum, Oklahoma that includes local, state, and national news along with advertising.
Date: March 30, 1916
Creator: Anderson, A. W.
Object Type: Newspaper
System: The Gateway to Oklahoma History
Guthrie Daily News. (Guthrie, Okla. Terr.), Vol. 5, No. 1445, Ed. 1 Friday, March 30, 1894 (open access)

Guthrie Daily News. (Guthrie, Okla. Terr.), Vol. 5, No. 1445, Ed. 1 Friday, March 30, 1894

Daily newspaper from Guthrie, Oklahoma Territory that includes local, territorial, and national news along with advertising.
Date: March 30, 1894
Creator: unknown
Object Type: Newspaper
System: The Gateway to Oklahoma History
The Tyrone Observer. (Tyrone, Okla.), Vol. 18, No. 43, Ed. 1 Thursday, March 30, 1922 (open access)

The Tyrone Observer. (Tyrone, Okla.), Vol. 18, No. 43, Ed. 1 Thursday, March 30, 1922

Weekly newspaper from Tyrone, Oklahoma that includes local, state, and national news along with advertising.
Date: March 30, 1922
Creator: unknown
Object Type: Newspaper
System: The Gateway to Oklahoma History