"A convenient summary is given of useful formulas on the kinematics of high energy electron scattering together with a derivation of the relevant formulas for transforming from the center of mass to the laboratory system such parameters as scattering cross sections. The formulas derived hold for any two- body collision: the approximation (m = 0) employed for the electron scattering calculations is rigorously true for the elastic scattering of photons."

The general expression for the angular correlation between radiations produced in successive cascade transitions is derived by use of Racah algebra. The result is then specialized to the beta - gamma correlation and applied to two cases in which additional properties of the photon are specified, the circular polarization and the plane polarization. The prospect of testing time reversal and determining nuclear matrix element ratios by beta - gamma correlation measurements is explored using the nuclide Tm/sup 170/ as an example. The directional angular correlation between the 2.31-Mev beta and the subsequent 0.605-Mev gamma emitted in the decay of Sb/sup 124/ was measured as a function of the beta energy. The K-conversion coefficient of the 279-kev gamma following beta decay of Hg/sup 203/ was measured by comparing the x-ray and gamma intensities in a scintillation spectrometer. The measured valve of alpha /sub k/ = 0.195 plus or minus 0.014 indicates that the transition is M1 with E2 mixed to the extent of 63%. The angular correlation of the 107-1.24 Mev gamma cascade in Zn/sup 68/ following the decay of 68-min Ga/sup 68/ is shown. The Legendre polynomial expansion coefficients were deter-gular correlation in the decay of Sb/ sup 118/ was …

Potential methods have been examined for the reclamation of high boiler arising from the degradation of polyphenol materials in use as reactor coolants and moderators. To define the chemistry of potential reclamation processes, model polyphenol compounds were used. These include biphenyl, o, m and p-terphenyl, and p-quaterphenyl. Emphasis has been on hydrocracking, redistribution (reaction with benzene), and partial reduction. Preliminary study has been made of the application these techniques to high boiler from Santowax-OM used in the OMRE. The three methods show promise but require detailed investigation to minimize carbon formation to locate optimum operating conditions,.

The report covers work performed during the period September 1, 1959 through September 30, 1959. The general objectives of the program of "Studies of Reactor Containment" are to accomplish theoretical and experimental investigations of the loads to which external containment structures for nuclear reactors are subjected in the vent of a violent incident at the reactor core, the evaluation of methods of reducing that loading, and the study of the response of and design criteria for external containment structures as a result of such loading. Progress of technical effort during the report period is summarized for each of the eight tasks of the program.

This review lists some of the salient features of semiconductor particle counters and cannot claim to contain an exhaustive listing of all the work in the field. Performance results on the surface-barrier counters as developed at California Institute of Technology are included as typical for this type of counter, though comparable results have been obtained elsewhere.

The purpose of the test was to determine if failed blanket elements exist in other regions of the core beside F-2. FEDAL sampling ports that have indicted the greatest deviation as determined in a statistical analysis performed on a number of traverses in the FEDAL system will be tested. Data obtained from the start up runs of the FEDAL sample port Nos. 11, 31, 36 and 37 of Monitor 2 and port Nos. 14, 46, 11, 49 and 7 of Monitor 1 gave no indications of a blanket element failure. At each power increase, the radiation increase was normal with no signs of bursts or peaks of radiation which would indication the failure of a blanket fuel element.

The PWR Plant was operated at approximately 60 MW net electrical output for a total of 1000 EFPH from February 3, 1959 to March 28, 1959. During this period, while performing DL-S-225, there were two planned shutdowns, no safety shutdowns or safety insertions and one flux title. The performance of the plant was satisfactory during the period of the test.

Experiments are described which show that the velocity of compressional waves along a thin plate varies as a function of the frequency of the waves. In terms of transit times in aluminum the value is between 4.02 and 4.94 microseconds per inch.

Ultrasonic inspection for subsurface flaws is widely used in American industry. This report reviews the general principles and specific techniques of ultrasonic testing. The information is based on a review of the technical literature plus the experience of the Quality Assurance Department at Sandia Corporation in applying this nondestructive testing technique to quality evaluation programs.

The Lindemann assumption of direct contact of neighboring atoms at fusion is replaced by the criterion that melting occurs when the root-mean-square amplitude of thermal vibration reaches a critical fraction ρ, presumed the same for all isotropic monatomic solids, of the distance of separation of nearest-neighbor atoms. The Debye-Waller theory of the temperature dependence of the intensity of Bragg reflection of x-rays is used, without further assumptions, to derive a generalized Lindemann law. In contrast to the Lindemann form, all physical quantities involved in this formulation are evaluated at the fusion point, and departure of the average energy of an atomic oscillation from the equipartition value is taken into account by the quantization factor of the Debye-Waller theory. If the Grüneisen constant γm of the solid at fusion is evaluated by its definition from the Debye frequency of the solid, use of the generalized Lindemann law and Clapeyron's equation permits one to express γm in terms of the bulk modulus of the solid at melting and the latent heat and volume change of fusion. By means of Grüneisen's law applied to the solid at fusion, γm can be expressed likewise in terms of the corresponding bulk modulus, thermal expansion, volume, …

A generalization of the Fermi-Thomas model for application of mixtures. This study attempts to determine the equation of state of water up to pressure of 10,000 megabars and temperatures of several thousand electron-volts.

Technical report that attempts to bring together the various chemical procedures which proved most useful in studying the results of cyclotron bombardment or small scale neutron bombardments of heavy element targets. The report is limited to the elements of the "actinide", or second rare earth series, starting with thorium and including the newly discovered elements of atomic number 95 and 96. Every attempt is made to include all details necessary so this report can serve as a practical laboratory guide. The report covers separation problems, time factors, and dealing with dangerously radioactive targets.

Technical report describing that the use of controlled amounts of carbonate, acting both as complexing agent buffer led to a fairly satisfactory procedure for the determination of Th in Th-U alloys, using cupferron. The alloy, dissolved in NHO2, in the presence of HF, is treated with H2SO4 and the mixture is evaporated in SO2 fumes. The solution is diluted and (NH4)2CO2 is added. Th is precipitated from this solution with cupferron. The precipitate is weighed as ThO2 after ignition. An accuracy of 6% was obtained. A method was developed specifically for the determination of Th in U-Th alloys containing 1 to 10% Th. An ion exchange resin in column is used to separate Th from U, with NH2OH-HCl as complexing agent. The Th is then precipitated, ignited, and weighed in the conventional manner.

Abstract. a method of recovering thorium from slag from the bomb process of producing thorium has been developed. HCl and NaOH are the only chemicals required in quantity. Materials required for a representative slag are given.

Cost estimates for two types of Th producing plants are offered. One utilizes Th(NO3)4 as raw material, the other uses monazite sand. Final processing schemes and plant designs are not fixed, so the estimates represent maximum costs. Recommendations for research and development of Th producing methods are given.

Table showing the estimated reserves of vanadium-bearing rock in the Paris-Bloomington, Montpelier, Sublette Ridge, Swift Creek, and Strawberry Creek - Greys River Divide extraction areas in west-central Wyoming and southeastern Idaho. Indicated tonnage and inferred tonnage values are given for each area in millions of tons, along with the percentage of vanadium ore rock, maximum and minimum thickness, and average thickness of the rock in the extraction area.

Illustrations accompanying a report investigating the locations of vanadium-bearing phosphatic shale in West-Central Wyoming and Southeastern Idaho. The set includes seven maps (Plates I and V-X) showing the location of rock formations in the area and three charts (Plates II-IV) showing the correlation between the occurrence of vanadium deposits and the thin persistent beds of phosphate rock, oolite, siltstone, dolomite, and limestone with which they are interbedded.

This report describes the Temple Mountain district in Utah, specifically four Shinarump-capped areas that are recommended for ore mining.

Discussing recommendations for wagon drilling in the Temple Mountain District, Utah

Determining the major structural features of the area, and the relation between the uranium mineralization along Golden Gate canyon and that of Ralston Creek.

Discussing the Majuba Hill mine, located 20 miles northwest of Imlay, Nevada, and consisting of approximately 4000 feet of workings on three levels.

Discussing an examination made of Green Vein Mesa in the southwestern part o he San Rafael Swell in Utah to determine the extent of uranium mineralization.

Discussing Vanadium-bearing phosphatic shale produced in West-central Wyoming and Southeastern Idaho

Abstract Line spectra of vanadium, niobium, titanium, molybdenum and rhenium of sufficient intensity to allow detection at the 1–10 p.p.m. level can be excited in fuel-rich, oxy-acetylene flames. For the strongest lines of tungsten, the sensitivity of detection is 90 p.p.m. Weak lines of zirconium, hafnium, osmium, tantalum and uranium are also observed in these flames. Recordings of the spectra are given along with wavelength tables of the strongest lines.