Correspondence issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO provided information on issues related to the National Institutes of Health's (NIH) licensing of inventions developed under intramural research projects, focusing on the: (1) extent of and reasons for the differences between the number of research inventions licensed under cooperative research and development agreements (CRADA) compared to inventions licensed under other intramural research projects; and (2) internal controls that ensure proper accountability for royalty income resulting from these licenses."

A letter report issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO provided information on the Department of Defense's (DOD) Future Years Defense Program (FYDP) for fiscal year 2000, focusing on the: (1) major changes and adjustments in the 2000 FYDP as compared to the 1999 FYDP; and (2) risks that the 2000 FYDP faces that may prevent it from being implemented as planned."

A letter report issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO assessed the foreign military sales program to determine the changes needed to improve the viability of the program, focusing on: (1) whether the foreign military sales program has achieved full recovery of its administrative costs; (2) the Defense Security Cooperation Agency's (DSCA) basis for making administrative account adjustments; and (3) the effectiveness of various foreign military sales reinvention efforts in terms of cost recovery."

The purpose of the present program is to develop soluble analogs of surface confined catalysts that can be impregnated directly into the coal structure at low temperatures. This approach should avoid problems related to surface area dependence, a two phase (surface-liquid) reaction system and, mass transport limitations.

The Coal Project was able to make considerable progress in understanding the evolving energy situation in Asia and the future role of coal and Clean Coal Technologies. It is clear that there will be major growth in consumption of coal in Asia over the next two decades -- we estimate an increase of 1.2 billion metric tons. Second, all governments are concerned about the environmental impacts of increased coal use, however enforcement of regulations appears to be quite variable among Asian countries. There is general caution of the part of Asian utilities with respect to the introduction of CCT's. However, there appears to be potential for introduction of CCT's in a few countries by the turn of the century. It is important to emphasize that it will be a long term effort to succeed in getting CCT's introduced to Asia. The Coal Project recommends that the US CCT program be expanded to allow the early introduction of CCT's in a number of countries.

I have investigated trigger requirements for the intermediate tracking system of the SDC detector, using muons in the final states of some physics processes of interest and relevance to the program envisaged to be pursued at the SSC. The study is done at the physics event generator level with the PYTHIA package, augmented by a very simplistic simulation of the momentum measurement expected from the intermediate tracking system. For the range in pseudorapidity of {vert bar}{eta}{vert bar} = 1.7--2.5, I find a subdivision into four basic bins sufficient to ensure that the width of the transverse momentum trigger threshold will not be dominated by the lack of knowledge of the polar angle. In addition, the azimuthal resolution has be better than 1 mrad to allow transverse momentum thresholds from p{sub t}{approx}10 GeV/c up to and beyond p{sub t}=20 GeV/c to be implemented which are needed to accomplish the physics goals. 10 figs., 1 tab.

A selection of opportunities for neutrino physics from a source generated from pions that decay in flight and at rest is described. The present source at LAMPF has a duty factor of about 6%; improvements in opportunities that emerge from a source using a pulse 0.25 {mu}sec long from a proton storage ring are also described. 7 refs., 9 figs.

A Pulsed Lepton Source is being considered at the LAMPF facility at Los Alamos National Laboratory. The source plan is described together with a description of the components and performance as they exist at present. 9 figs.

A design study for a Pion Linac (PILAC) at LAMPF is under way at Los Alamos. We present here a reference design for a system of pion source, linac, and high-resolution beam line and spectrometer that will provide 10{sup 9} pions per second on target and 200-keV resolution for the ({pi}{sup +}, K{sup +}) reaction at 0.92 GeV. A general-purpose beam line that delivers both positive and negative pions in the energy range 0.4-1.1 GeV is included, thus opening up the possibility of a broad experimental program as is discussed in this report. A kicker-based beam sharing system allows delivery of beam to both beam lines simultaneously with independent sign and energy control. Because the pion linac acts like an rf particle separator, all beams produced by PILAC will be free of electron (or positron) and proton contamination. 4 refs., 6 figs.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification; Whether a therapeutic optometrist may perform certain procedures (RQ-884)

This document provides the Readiness Assessment Plan (RAP) for the Project W-025 (Radioactive Mixed Waste Land Disposal Facility) Readiness Assessment (RA). The RAP documents prerequisites to be met by the operating organization prior to the RA. The RAP is to be implemented by the RA Team identified in the RAP. The RA Team is to verify the facility`s compliance with criteria identified in the RAP. The criteria are based upon the {open_quotes}Core Requirements{close_quotes} listed in DOE Order 5480.31, {open_quotes}Startup and Restart of Nuclear Facilities{close_quotes}.

The Coal Project was able to make considerable progress in understanding the evolving energy situation in Asia and the future role of coal and Clean Coal Technologies. It is clear that there will be major growth in consumption of coal in Asia over the next two decades -- we estimate an increase of 1.2 billion metric tons. Second, all governments are concerned about the environmental impacts of increased coal use, however enforcement of regulations appears to be quite variable among Asian countries. There is general caution of the part of Asian utilities with respect to the introduction of CCT`s. However, there appears to be potential for introduction of CCT`s in a few countries by the turn of the century. It is important to emphasize that it will be a long term effort to succeed in getting CCT`s introduced to Asia. The Coal Project recommends that the US CCT program be expanded to allow the early introduction of CCT`s in a number of countries.

Platinum/iridium and tungsten wires were electronically etched in chloride and caustic solution, respectively, to produce tips with high aspect ratio. A direct relationship between the meniscus and the aspect ratio of etched tips was established. Scanning electron micrographs indicated that higher aspect ratios were obtained by changing the geometry of the meniscus during the etch either by an increase in the applied a.c. voltage or with the addition of a nonpolar layer above the electrolytic solution during the etching process. Above the breakdown voltage, two possible mechanisms appeared to control the etching process by expediting chemical dissolution: cavitation and sparking. Cavitation caused erosion due to the force of evolved gases against the electrode and sparking attacked the surface by vaporizing the metal. Sparking commenced on both wires near 24V. This voltage corresponded to a minimum in the plot of total etch time versus voltage. From light emission studies, sparking on Pt/Ir was associated with the ionization of Pt, Ir, Ca, and Cl. A compositional analysis of insoluble black particles produced during a.c. and d.c. etching of Pt/Ir revealed Pt and Ir as the major constituents of the product. The sparking process was shown to have a potential use in micromachining.

W boson + QCD Jet events, produced in 1.8 TeV proton-antiproton collisions and measured by the Collider Detector at Fermilab (CDF), were used to measure the center-of-mass production angle of the W + jet system, and were also used to place limits on the production of excited quark states. The center-of-mass production angular distribution agrees well with leading order and next-to-leading order QCD predictions. Excited quark states were searched for in the reaction q + g {yields} q* {yields} q + W. Upper limits on the q* cross section, as a function of the q* mass, are shown. Comparison with a theoretical prediction for q* production excludes excited quark states with a mass in the range 150--530 GeV/c{sup 2}, at 95% confidence.

This document provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. This report, Volume 2, presents historical data for the Nation from 1930 to 1992, and by State from 1967 to 1992. The Supplement of this report presents profiles of selected companies.

Our 1993 third quarter report discusses the results of our work on: (1) gas-oil gravity drainage in layered media; and, (2) the influence of viscous forces on gas-oil flow in fractured porous media. For sometime, we have been working on the incorporation of reinfiltration and capillary continuity concepts in a dual-porosity model. A simple and accurate technique has been developed for this purpose. The experiments on gas-oil gravity drainage in layered media are intended to: (1) verify our theoretical analysis; (2) provide more insight; and, (3) provide a guide for the simulation of gas-oil gravity drainage at field scale. On the first objective, the experiments confirm that gas-oil gravity drainage could result in a downward gas fingering phenomenon. Without capillary pressure, downward gas fingering could not realize. The experiments also show that drainage from a less permeable layer would be an extremely slow process. This is similar to the drainage performance of matrix blocks in fractured porous media. Apparently, relative permeability to gas (i.e. gas mobility) may be important for flow in layered porous media. The project on the effect of viscous forces on gas-oil displacement in fractured porous media has taken longer than anticipated. For the first time, in …

Hanford Site tank waste supernatants will be pretreated to separate the low-level and high-level fractions. The low-level waste fraction, containing the bulk of the chemical constituents, must be processed into a vitrified waste product which will be disposed of onsite, in a safe, environmentally sound, and cost effective manner. The high-level waste fraction separated during supernatant pretreatment (primarily cesium) will be recombined with an additional high-level waste fraction generated from pretreatment of the tank waste sludges and solids. This combined high-level waste fraction will be immobilized as glass and disposed in a geological repository. The purpose of this document is to establish the functional requirements baseline for Project W-236B, Initial Pretreatment Module, by defining the level 5 and 6 functions and requirements for the project. A functional analysis approach has been used to break down the program functions and associated physical requirements that each function must meet. As the systems engineering process evolves, the design requirements document will replace this preliminary functions and requirements document. The design requirements document (DRD) will identify key decisions and associated uncertainties that impact the project. A revision of this document to a DRD is not expected to change the performance requirements or open issues. …

Research is focused on bimetallic compounds of late transition metals with carbon dioxide or CO{sub 2}-containing bridging ligands. The compounds are models for catalytic intermediates in CO{sub 2} fixation/activation processes. Thermolysis was studied. Re, Fe, and Sn complexes were studied.

The purpose of the present program is to develop soluble analogs of surface confined catalysts that can be impregnated directly into the coal structure at low temperatures. This approach should avoid problems related to surface area dependence, a two phase (surface-liquid) reaction system and, mass transport limitations.

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification; Whether planned unit developments are "political subdivisions" for purposes of the Antiquities Code of Texas, Nat. Res. Code ch. 191, and related questions (ID# 25125)

Tensile stresses in the Toshiba cold mass support links generated by the loadings the coil is subject to, and the deflections the coil experiences as a result of these loadings, are estimated. The axial links are conservatively designed and it should be reasonably easy to ensure that the three links at each end of the coil carry approximately equal loads. Small deviations from this ideal should not have great consequence as a system-of-three is somewhat forgiving in this regard. The use of preload makes the north operating deflection equal to the smaller south operating deflection, possibly a convenience when the nozzle design is contemplated. Toshiba has indicated they will establish the desired preload using strain gauges near the warm ends of the links.