Abstract: "The mechanical properties and corrosion resistance of induction-melted, zirconium-tin alloys have been determined. The alloys investigated contained from zero to five per cent tin and up to 0.3% carbon. The zirconium used was United States Bureau of Mines sponge zirconium. The mechanical properties investigated include the tensile, hot-hardness, and impact properties."

Report detailing various Bremsstrahlung theories since 1945. Citations for different theories are included.

An anion exchange precipitation procedure was developed for the determination of Cs¹³⁷ in various aged fission product waste solutions, and other solutions containing Cs¹³⁷. The procedure is based on the ability of an anion exchange column to function simultaneously at an anion exchanger and as a precipitating agent (1).

Laboratory studies have shown that the double salt, CaF2-PuF4, can be precipitated by rapid addition of hydro-fluoric acid to solutions containing 25 to 75 g Pu/1, caleium equimolar to plutonium, and 1 to 10 M HNO3. The precipitate, which is subsequently washed with water and dried to 300 degrees C in dehumidified, deoxygenated argon, can be reduced thermally by calcium to give high yields of plutonium metal.

This is a summarizing and reviewing report in which almost all the experimental data representing Project work done prior to 1949 on the corrosion of pure uranium are brought together and analyzed. New data obtained in this laboratory on corrosion rates in laboratory atmosphere and on the identification of corrosion products by electron diffraction are included. The data for corrosion in each of several different media have been plotted according to logarithm-of-the-rate versus reciprocal-temperature coordinates; and from these plots values for the energies and entropies of activation of the corrosion reactions have been obtained. By theoretical treatment of the role of oxygen as a negative catalyst, it is shown that this element may be expected to "poison" the corrosion rection and then act as a corrosion inhibitor. A practical significance of these data analyses is that they explain why machined uranium parts stored in inert atmospheres (helium or argon) containing only very small amounts of water vapor will corrode relatively rapidly with the formation of loose powdery oxide, whereas similar parts may be kept in dry air almost indefinitely with formation on their surface of only a discoloring, but adhered, oxide coating.

Abstract. Chemical analytical studies of graphite raw materials have revealed new sources of petroleum cokes and pitches of greater purity than those previously used in the manufacture of project graphite. The use of these raw materials of exceptional purity has resulted in an improvement in k of the order of one per cent as compared with the AGOT-AGNT graphite typical of the previous production. A study of the graphitizing process has shown that no dangerous impurities are introduced in the graphite in manufacture; rather, the process actually purifies. furthermore, impurities are distributed homogeneously within the furnace charge; thus the AGOT-AGNT distinction is no longer necessary. A comparison of the methods of graphite testing has demonstrated excellent correlations between chemical analytical data, the results of the function test at Argonne, and the sigma pile experiments. It may therefore be inferred that chemical testing should be an adequate control of the graphite purity. Methods are described for the analysis of ash, B, V, TI, FE, and Ca in petroleum coke, pitch, and graphite.