The objective is to identify commercially available additives which are effective in reducing the mobility of carbon dioxide, CO/sub 2/, thereby improving its efficiency in the recovery of tertiary oil, and which are low enough in cost to be economically attractive. During the past year significant progress has been made in developing a commercial method of reducing the mobility of carbon dioxide in enhanced oil recovery processes. Four basic chemical structures, listed below, appear to show most promise for gas mobility control: (1) ethoxylated adducts of C/sub 8/ - C/sub 14/ linear alcohols; (2) sulfate esters of ethoxylated C/sub 9/ - C/sub 16/ linear alcohols; (3) low molecular weight co-polymers of ethylene oxide and propylene oxide; and (4) synthetic organic sulfonates. With the exception of the sulfonates, the above types are compatible with normal oil field brines, unaffected by the presence of crude oil and stable under conditions common in a petroleum reservoir. The second significant result during the year involves identification of several sulfonate structures that have high potential for mobility control for carbon dioxide. Commercial sulfonate additives are available that appear optimum for reservoirs where freshwater will be used to inject the surfactant solution. They can also be …

At the stage of the antiproton-nucleon annihilation chain of events relevant to propulsion the annihilation produces energetic charged pions and gamma rays. If annihilation occurs in a complex nucleus, protons, neutrons, and other nuclear fragments are also produced. The charge, number, and energy of the annihilation products are such that annihilation rocket engine concepts involving relatively low specific impulse (I/sub sp/ approx. = 1000 to 2000 s) and very high I/sub sp/ (3 x 10/sup 7/ s) appear feasible and have efficiencies on the order of 50% for annihilation energy to propulsion energy conversion. At I/sub sp/'s of around 15,000 s, however, it may be that only the kinetic energy of the charged nuclear fragments can be utilized for propulsion in engines of ordinary size. An estimate of this kinetic energy was made from known pieces of experimental and theoretical information. Its value is about 10% of the annihilation energy. Control over the mean penetration depth of protons into matter prior to annihilation is necessary so that annihilation occurs in the proper region within the engine. Control is possible by varying the antiproton kinetic energy to obtain a suitable annihilation cross section. The annihilation cross section at low energies is …

The objective of this project is to evaluate and demonstrate a cost effective emission control technology for acid rain precursors, oxides of nitrogen (NO{sub x}) and sulfur (SO{sub x}), on three coal fired utility boilers in Illinois. The units selected are representative of pre-NSPS design practices; tangential, wall, and cyclone fired. The specific objectives are to demonstrate reductions of 60 percent in NO{sub x} and 50 percent in SO{sub x} emissions, by a combination of two developed technologies, gas reburning (GR) and sorbent injection (SI). With GR, about 80--85 percent of the coal fuel is fired in the primary combustion zone. The balance of the fuel is added downstream as natural gas to create a slightly fuel rich environment in which NO{sub x} is converted to N{sub 2}. The combustion process is completed by overfire air addition. SO{sub x} emissions are reduced by injecting dry sorbents (usually calcium based) into the upper furnace, at the superheater exit or into the ducting following the air heater. The sorbents trap SO{sub x} as solid sulfates and sulfites, which are collected in the particulate control device.

The objective of this work was to irradiate a Nb/sub 3/Sn superconductor with 14.8 MeV neutrons at 4 K and measure critical current in transverse fields of up to 12 T, irradiating up to a fluence sufficient to decrease the critical current to below its initial value. Critical temperatures were also to be measured. The samples were to be kept near 4 K between the irradiation and the measurement of critical properties. This work is directed toward establishing an engineering design fluence limit for Nb/sub 3/Sn when used in fusion reactor superconducting magnets.

This paper covers Maxwell's approach to developing energy storage capacitors. Based on previous capacitor designs of 3 KJ, 5 KJ and 10 KJ, the final Nova 12.5 KJ capacitor evolved. At the outset of the Nova capacitor development program, a relatively new dielectric system, polypropylene-paper-DOP, seemed to show superiority in volumetric efficiency, life, and more importantly cost. However, as a result of studies performed at Maxwell, a high-density, energy-storage capacitor was developed utilizing new high-quality, high-density paper and caster oil as the dielectric. Test data have demonstrated that the Maxwell 12.5 KJ capacitor exceeds all LLNL's qualification requirements.

A method was developed to establish a numerically controlled tool path with respect to the work spindle centerline. Particularly adapted to the diamond turning of optics, this method is based upon interferogram analysis and is applicable to the establishment of the work spindle centerline relative to the tool path for any center-turned optic having a well-defined vertex radius of curvature. The application reported is for an f/2 concave spherical mirror.

Currently, direct fuel rho r measurements on Inertial Confinement Fusion (ICF) targets by neutron activation of the argon tracer gas mixed with the DT fuel would require a 100 fold increase in neutron yield. Bromine, on the other hand, has excellent properties for neutron activation analysis at neutron yields of 10two' to 10/sup 8/, when present at an internal pressure of from 0.1 to 0.2 atmospheres. Bromine addition is accomplished in a 2 furnace system using the dried-gel method of microsphere production. An upper furnace operated at 1500/sup 0/C is separated from a lower furnace by a cooled zone. The lower furnace is filled with bromine gas and operated at approximately 1250/sup 0/C. The upper furnace is the glass production furnace. The cooled zone in between the upper and lower furnace is to prevent the hot bromine gas from rising into the upper furnace. The microspheres pass through the cooled zone and immediately into the 1250/sup 0/C bromine furnace where the bromine permeates into the spheres.

Uranium feed materials, depending on the production process, have been found to contain arsenic (As) as a contaminant. Analyses show the As to be present as As pentafluoride (AsF{sub 5}) and/or hexafluoroarsenic acid (HAsF{sub 6}) and enter the enrichment cycle through contaminated hydrogen fluoride (HF). Problems related to corrosion of cylinder valves and plugging of feed lines and valves have been attributed to the As. Techniques to separate AsF{sub 5} from uranium hexafluoride (UF{sub 6}) using sodium fluoride (NaF) as a trapping media were successful and will be discussed. Procedures to significantly reduce (up to 97%) the level of As in HF will also be reported. 5 figs., 9 tabs.

The injection beamline runs over the last magnet before a long straight section and is then displaced downward 55.88 cm to the accelerator beamline. The displacement is magnetic and the final deflection onto the synchrotron orbit is by an electric kicker. The first component, the reverse septum magnet, bends the injection beam 25)degree) downward. This is followed by the injection septum (20)degree) bend upward) and the final injection kicker (5)degree) bend upward). The septum magnets produce a peak field of 3.4 K gauss at a current of 28,000 amperes within a 0.1 msec long pulse. The electric kicker produces a field of 7.3 KV/cm with a pulse length of 0.0011 msec. The septum magnets are similar to each other in construction with a bending radium of 72.7 cm. The curvature is required to increase the effective aperture. Each magnet has a single-turn copper coil bonded to a stainless steel plate for reinforcement. This eliminates insulating material, which could be subject to radiation damage, at the septum. The stainless steel plate is welded to the magnet laminations. The current is confined to the septum by the insulation between the laminations, which are a standard core material. The total septum thickness with …

The High Field Test Facility (HFTF), presently under construction at LLNL, is a set of superconducting coils that will be used to test 1-m-o.d. coils of prototype conductors for fusion magnets in fields up to 12 T. The facility consists of two concentric sets of coils; the outer set is a stack of Nb-Ti solenoids, and the inner set is a pair of solenoids made of cryogenically-stabilized, multifilamentary Nb/sub 3/Sn superconductor, developed for use in mirror-fusion magnets. The HFTF system is designed to be parted along the midplane to allow high-field conductors, under development for Tokamak fusion machines, to be inserted and tested. The background field coils were wound pancake-fashion, with cold-welded joints at both the inner and outer diameters. Turn-to-turn insulation was fabricated at LLNL from epoxy-fiberglass strip. The coils were assembled and tested in our 2-m-diam cryostat to verify their operation.

The percentage of adipose (fat) tissue in the chest wall must be known to accurately measure Pu in the human lung. Correction factors of 100% or more in x-ray detection efficiency are common. Methods using simple /sup 40/K and biometric measurement techniques were investigated to determine the adipose content in the human chest wall. These methods predict adipose content to within 15% of the absolute ultrasonic value. These new methods are discussed and compared with conventional ultrasonic measurement techniques. (ERB)

The Schroedinger Integral Equation is derived for an N-body system, and solutions for required Green's functions are obtained. The initial method of numerical solution has yielded the correct ground states and lower excited states of He (test case) and dt..mu... Steps are being taken to improve the numerical accuracy.

This document is issued quarterly for the purpose of summarizing the radioactive gaseous wastes that are discharged from the facilities of the Rockwell Hanford Operations (Rockwell). Data on alpha and beta emissions during 1979 are presented where relevant to the gaseous effluent. Emission data are not included on gaseous wastes produced within the 200 areas by other Hanford contractors.

Lawrence Livermore National Laboratory (LLNL) undertook the task of analyzing the actual and potential value of an interfacility NRC material accounting system in deterring and detecting both material diversion and facility material accounting data falsification. The most important conclusion is that only relatively minor changes are needed to upgrade the current NRC interfacility reporting system. The emphasis of the task was on evaluating the usefulness of an NRC-monitored material accounting information system in providing protection against accounting fraud at the plant management or corporate level. The Nuclear Materials Management and Safeguards System (NMMSS) and the NRC Safeguards Status Report System (SSRS), the principal constituents of the current interfacility NRC material accounting information system, are described. Their relationship is shown in two information flow diagrams. Deterministic accounting checks and balances are discussed, both for the current NRC interfacility material accounting system and for an upgraded system. Detection mechanisms are described that would use currently available data and that could be exercised by the NRC in its safeguards management role. Additional checks and balances are recommended, with corresponding changes in data reporting requirements, to upgrade NRC interfacility material accounting system.

An important advance in the computation of hadron and glueball masses has been the introduction of non-local operators. This talk summarizes the critical signal-to-noise ratio of glueball correlation functions in the continuum limit, and discusses the case of (q{bar q} and qqq) hadrons in the chiral limit. A new strategy for extracting the masses of excited states is outlined and tested. The lessons learned here suggest that gauge-fixed momentum-space operators might be a suitable choice of interpolating operators. 15 refs., 2 tabs.

The fusion breeder is a fusion reactor designed with special blankets to maximize the transmutation by 14 MeV neutrons of uranium-238 to plutonium or thorium to uranium-233 for use as a fuel for fission reactors. Breeding fissile fuels has not been a goal of the US fusion energy program. This paper suggests it is time for a policy change to make the fusion breeder a goal of the US fusion program and the US nuclear energy program. The purpose of this paper is to suggest this policy change be made and tell why it should be made, and to outline specific research and development goals so that the fusion breeder will be developed in time to meet fissile fuel needs.

The Nova laser system for Inertial Confinement Fusion studies at Lawrence Livermore National Laboratory is under construction and will be completed October 1984 with first operations scheduled for 1985. This system is the largest precision opto-mechanical engineering system ever built. Major engineering and subsystems are mechanical, optical, and electrical power. A series of system technologies include alignment, diagnostics, target, frequency conversion, and controls. This paper will only discuss the mechanical system.

Progress is reported on research in the areas of radiation protection and industrial hygiene. Subject areas include: (1) basic computer programs for counting room automation; (2) a computing portable neutron spectrometer; (3) preliminary measurements of the neutron energy response of CR-39 carbonate plastic; (4) effect of high-expansion foam on self-1 contained breathing apparatuses; (5) permeation of organic solvents through glove samples; (6) determining neutron dose rates and 9-to-3 in. sphere ratios from a moderated 252Cf source in the LLL Calibration Facility; (7) application of the AERIN computer code to two americium inhalation exposures; and (8) air- and soil-sampling program at Site 300's high-explosive test bombers. (ACR)

The effect of transverse displacements of combined function magnets is investigated where the disperion in not matched due to roll. This dispersion function is perturbed by displacement of combined function magnets either singly or coherently. In the latter case the effect of a systematic (or DC) offset of magnets is examined. This type of error can occur due to systematics in the placement or the readout of Beam Position Monitors or equivalently by correcting the orbit of a beam of the wrong momentum with respect to the Arc magnet excitation. 5 refs., 18 figs.

''PIC'' simulation tracks particles through electromagnetic fields calculated self-consistently from the charge and current densities of the particles themselves, external sources, and boundaries. Already used extensively in plasma physics, such simulations have become useful in the design of accelerators and their r.f. sources. 5 refs.

Calculations suggest that experiments relating to disk heating, as well as beam deposition, focusing and transport can be performed within the context of current design proposals for accelerator test-facilities. Since the test-facilities have lower ion kinetic energy and beam pulse power as compared to reactor drivers, we achieve high-beam intensities at the focal spot by using short focal distance and properly designed beam optics. In this regard, the low beam emittance of suggested multi-beam designs are very useful. Possibly even higher focal spot brightness could be obtained by plasma lenses which involve external fields on the beam which is stripped to a higher charge state by passing through a plasma cell. Preliminary results suggest that intensities approx. 10/sup 13/ - 10/sup 14/ W/cm/sup 2/ are achievable. Given these intensities, deposition experiments with heating of disks to greater than a million degrees Kelvin (100 eV) are expected.

Ductile long range ordered alloys having high critical ordering temperatures exist in the (V,M)(Fe,Ni,Co)/sub 3/ system having the composition comprising by weight 20.6 to 22.6% V, 14 to 50% Fe, 0 to 64% Co, and 0 to 40% Ni, and 0.4 to 1.4% M, where M is a metal selected from the group consisting of Ti, Zr, Hf, and their mixtures. These modified alloys have an electron density no greater than 8.00 and exhibit marked increases at elevated temperature in ductility and other mechanical properties over previously known ordered alloys.

Experimental results on ion-cyclotron waves observed in the 2XIIB mirror machine are reviewed, and relevant theoretical work is discussed. The work reported generally substantiates the quasilinear diffusion model of mirror-plasma confinement, but also suggests alternatives. The end-loss current required by theory of the drift-cyclotron loss-cone (DCLC) instability agrees with measurements of this current. The experiment indicates that an increased ratio of plasma radius to ion gyroradius improves plasma confinement. However, measurements sometimes show a second ion-cyclotron mode, which is not the DCLC mode. Theoretical work on loss-cone instabilities has concentrated on linear, quasilinear, and fully nonlinear models of increased sophistication and experimental applicability.

A coal gasification operation or similar conversion process is carried out in the presence of an alkali metal-containing catalyst producing char particles containing alkali metal residues. Alkali metal constituents are recovered from the particles by burning the particles to increase their size and density and then leaching the particles of increased size and density with water, to extract the water-soluble alkali metal constituents.