The injection beamline runs over the last magnet before a long straight section and is then displaced downward 55.88 cm to the accelerator beamline. The displacement is magnetic and the final deflection onto the synchrotron orbit is by an electric kicker. The first component, the reverse septum magnet, bends the injection beam 25)degree) downward. This is followed by the injection septum (20)degree) bend upward) and the final injection kicker (5)degree) bend upward). The septum magnets produce a peak field of 3.4 K gauss at a current of 28,000 amperes within a 0.1 msec long pulse. The electric kicker produces a field of 7.3 KV/cm with a pulse length of 0.0011 msec. The septum magnets are similar to each other in construction with a bending radium of 72.7 cm. The curvature is required to increase the effective aperture. Each magnet has a single-turn copper coil bonded to a stainless steel plate for reinforcement. This eliminates insulating material, which could be subject to radiation damage, at the septum. The stainless steel plate is welded to the magnet laminations. The current is confined to the septum by the insulation between the laminations, which are a standard core material. The total septum thickness with …

The High Field Test Facility (HFTF), presently under construction at LLNL, is a set of superconducting coils that will be used to test 1-m-o.d. coils of prototype conductors for fusion magnets in fields up to 12 T. The facility consists of two concentric sets of coils; the outer set is a stack of Nb-Ti solenoids, and the inner set is a pair of solenoids made of cryogenically-stabilized, multifilamentary Nb/sub 3/Sn superconductor, developed for use in mirror-fusion magnets. The HFTF system is designed to be parted along the midplane to allow high-field conductors, under development for Tokamak fusion machines, to be inserted and tested. The background field coils were wound pancake-fashion, with cold-welded joints at both the inner and outer diameters. Turn-to-turn insulation was fabricated at LLNL from epoxy-fiberglass strip. The coils were assembled and tested in our 2-m-diam cryostat to verify their operation.

The effect of transverse displacements of combined function magnets is investigated where the disperion in not matched due to roll. This dispersion function is perturbed by displacement of combined function magnets either singly or coherently. In the latter case the effect of a systematic (or DC) offset of magnets is examined. This type of error can occur due to systematics in the placement or the readout of Beam Position Monitors or equivalently by correcting the orbit of a beam of the wrong momentum with respect to the Arc magnet excitation. 5 refs., 18 figs.

GCRA has approached the initial review of the subject plans from the vantage of Utility/User interests in an HTGR-SC/C Lead Project as characterized in the HTGR-SC/C Lead Project Plan. At their current stage of development, the plans are considered to represent the early views of General Atomic Company, acting as a potential NSSS vendor, on the effort necessary to design and license an HTGR-SC/C plant. As such, these plans embody GA's perception of the level of technical development and demonstration needed to support the cost and risk sharing assumptions in the Lead Project Plan. These plans and the plant design which they address will be subjected to a more formal review by other vendor and Utility interests in the course of establishing the Project Decision Package scheduled for June 1982. The culmination of these review activities will be the adoption of this information by all participants as the HTGR-SC/C Program Baseline.

Techniques for vectorizing complex logic are shown using a decoupled sliding-surface calculation that is part of a two-dimensional Lagrangian simulation model. The same source coding can be run on many vector, parallel, and multiprocessor computers with very little or no alteration. The vectorizing techniques have been used for a wide range of problems.

TEBASCO is a Tandem mirror Equilibrium and BAllooning Stability COde. TEBASCO allows you to compute tandem-mirror MHD equilibria and to analyze both the flute-averaged and ballooning-mode stability of these equilibria. This stability analysis is directed toward the computation of marginal stability boundaries. Users of TEBASCO require a binary output file from the EFFI code which describes the vacuum magnetic field. In making this EFFI file the user will have defined a system of units for lengths (e.g., meters) and magnetic field (e.g., Tesla). In TEBASCO, all magnetic field strengths are normalized to the vacuum center-cell midplane value, and times are defined in units of the time for an Alfven wave in this field to transit one EFFI unit of length.

The definition phase for the International Thermonuclear Experimental Reactor (ITER) has been nearly completed, thus beginning a three-year design effort by teams from the European Community (EC), Japan, US, and USSR. Preliminary parameters for the superconducting magnet system have been established to guide more detailed design work. Radiation tolerance of the superconductors and insulators has been important because it sets requirements for the neutron-shield dimension and sensitively influences reactor size. Major levels of mechanical stress appear in the structural cases of the inboard legs of the toroidal-field (TF) coils. The winding packs of the TF coils include significant fractions of steel that provide support against in-plane separating loads, but they offer little support against out-of-plane loads unless shear-bonding of the conductors can be maintained. Heat removal from nuclear and ac loads has not limited the fundamental design, but it has nonnegligible economic consequences. 3 refs., 3 figs., 5 tabs.

Investigations of the possibilities for inflation using the four dimensional models inspired by superstring theory is reported and discussed in the context of related work. 34 refs., 1 fig.

Metered energy consumption data have been collected on existing commercial buildings to help establish the proposed Building Energy Performance Standards (BEPS). The search has identified 84 buildings whose metered energy consumption is equal to or less than that proposed for their BEPS budgets and another 7 buildings whose metered consumption is less than 20% above their BEPS budgets. The methodology used to identify the buildings and to collect their metered energy consumption data are described. The data are analyzed and summarized and conclusions are drawn.

The connection between the cubic-to-tetragonal martensitic phase transformation and the phenomenon of superconductivity in A15 compounds is being investigated. The degradation of the critical parameters, such as T/sub c/, H/sub c2/, and J/sub c/, with mechanical straining is of particular interest. Low-temperature x-ray diffraction experiments are performed on Nb/sub 3/Sn ribbons (with the bronze layers etched off) mounted on copper and indium sample stages. The cryostat used is unique in that it has a vacuum mechanical insert which allows the superconductor to be placed under both compressive and tensile strains while at low temperatures. Preliminary results indicate that the martensitic phase transition temperature, T/sub m/, increases with compressive strains. Other effects of strain on tetragonal phase production are also discussed.

Three ships were examined, the ED RYERSON, the ST. CLAIR, and the STEWART CORT to determine if retro-fitting these ships with a 3000 sq ft soft sail cat rig is economically feasible. By using existing weather data taken from recorded observations on Lake Michigan and Lake Superior and known performance characteristics of both the sailplan and hull, a computer program was written to model the problem. Three cases for each ship were estimated. The first was the average fuel savings, second was an optimistic estimate of fuel savings, and the third was a pessimistic estimate of fuel savings. Several considerations had to be taken into account that had serious consequences for the economic viability of the idea. One was the fact that all of the aforementioned ships have self unloading equipment that require about 80% of the deck space to be clear. This limited the choice of sailplans to one per ship. Another consideration is that due to bridge clearance problems an air draft of less than 125' was required. These two factors limited the size and efficiency of the sail plan. The third consideration is that due to the very tight shipping channels on the Great Lakes, there is …

During the summer of 1985, we replaced the WNR T-shaped target/moderator scheme with the LANSCE split-target/flux-trap-moderator design. The intent of this 'LANSCE upgrade' was to increase (to 12) the number of neutron beam lines serviced simultaneously, and to enhance the target area shielding and target system to accept 200 ..mu..A of 800-MeV protons. The four LANSCE moderators consist of three (chilled) water moderators, and a liquid hydrogen (20 K) moderator. The LANSCE target is machinable tungsten.

The performance of the Intense Pulsed Neutron Source (IPNS) Accelerator System is reported, including an increase in average beam current to 13.4 microamperes and increased reliability to 93.2%. Brief discussions are given for the performance of the major accelerator subsystems, including the H/sup -/ ion source and preaccelerator, the 50 MeV linac, and the synchrotron and its subsystems. (LEW)

The purpose of the cryostat transporter cart is to provide a means of rolling the CC cryostat in and out of a building, and to proyide a means of support for the cryostat while it is being worked on. The constraints on the cart are: (1) There should be a minimum amount of clearance between the cryostat and the ground, in order to be able to roll the cart and cryostat into a building; (2) The cart must be able to support the weight of the cryostat as well as the weight of approximately 4,000 gallons of liquid nitrogen; and (3) The cart must allow access to the underside of the cryostat for work that must be done. This report will address the design of the transporter cart, as well as any additional equipment needed to accomplish the above mentioned tasks.

Methods used to obtain the evaluated prompt fisson neutron spectrum N(E) and the average prompt neutron multiplicity anti ..nu../sub p/ are reviewed. The relative influence of experimental data; interpolated, extrapolated, and fitted experimental data; systematics; and nuclear theory are considered for the cases where (a) abundant experimental data exist, (b) some experimental data exist, and (c) no experimental data exist. The Maxwellian and Watt distributions, and the determination of the parameters of these distributions by data fitting, are described and compared to recent new theoretical work on the calculation of N(E). Similarly, various expressions for anti ..gamma../sub p/ that have been obtained by data fitting and systematics are described and compared to recent new theoretical work. Complications in the evaluation of N(E) and anti ..gamma../sub p/ due to the onset of multiple-chance fission and the interrelationships between N(E), anti ..gamma delta../sub p/ and the multiple-chance fission cross section are discussed using the example of the fission of /sup 235/U. Some statistics and comments are given on the evaluations of N(E) and anti ..gamma../sub p/ contained in ENDF/B-V, and a number of concluding recommendations are made for future evaluation work.

Studies were conducted to determine the feasibility of improving the optical image transmitted through a military aircraft windscreen by using single-point diamond turning. Reduced warpage (waviness) of the windscreen surfaces ensures that a more accurate optical image is presented to the aircraft pilot. Machining the acrylic surface was accomplished with slightly impared image transmissibility. The use of this technique as a potential production process is discussed.

The question of calculating differences in s- and p-wave radiation widths as a valid evaluation tool is explored. A purely statistical approach such as that provided by the Brink-Axel formula depends upon two factors: 1) an adequate description of the giant dipole resonance shape at energies well below the resonance, and 2) an adequate description of the level densities between the ground state and the excitation of the compound nucleus near the neutron separation energy. Some success has been obtained in certain regions of the periodic table with this simple approach, e.g., in the actinides where all nuclei exhibit similar rigid permanent deformations. However, if the method is to be used as a general evaluation procedure throughout the periodic table and particularly in regions where the radiative transition probabilities are enhanced by direct processes, it appears that much more nuclear structure information needs to be incorporated into the calculations.

Wide-angle focusing Fresnel Lenses with specially curved image collapsing mirrors are developed for nontracking solar concentrators. A new type of stepped prism lens is designed with prism facets on either the inside or outer lens surface which concentrates solar radiation incident in a 60/sup 0/ elevation by 100/sup 0/ azimuth angle sectors. Thermal tests on a small model collector with a dielectric lens aperture 30 1/2 x 30 1/2 cms were conducted using a single subreflector which concentrated all acceptance zone radiation onto a fixed absorber shelf 8 cms wide. With absorbing copper tubes coated with black chrome carrying water as circulant thermal efficiencies of approximately 50% on large East West deployed solar panels are estimated. Vacuum abosrbers were also installed with improved efficiencies and operating temperatures. Segmented subreflectors were designed to increase concentration ratios from 3 to approximately 12. An economic study of the comparative cost vs performance advantages of this new technology was made. Production cost (1980) for the stepped lens - single subreflector concentrator were estimated at about $113. per meter/sup 2/ ($10.50 per ft/sup 2/). Because of the wider angular coverages, thinner structures, and sharp focusing available for larger concentration ratios, the new technology offers important …

EEMIS has responsibility for providing special information and communication services to government officials, at Federal and state levels, who must deal with energy emergencies. Because of proprietary information residing in the data base used for Federal purposes, a special system (EEMIS-S) must be established for use by the states. It is planned to acquire teleprocessing services for EEMIS-S from a time-sharing commercial vendor, and the process for procurement must meet guidelines for approval. The work plan and schedule for meeting these guidelines are discussed. Tasks to be included contain estimates of time, cost, and resources required, all of which are briefly described.

Characterization of nuclear waste ceramics requires techniques possessing high spatial and x-ray resolution. XRD, SEM, electron microprobe, TEM and analytical EM techniques are applied to ceramic formulations designed to immobilize both commercial and defense-related reactor wastes. These materials are used to address the strengths and limitations of the techniques above. An iterative approach combining all these techniques is suggested. 16 figures, 2 tables.

Examples are given of time-resolved beam profiles measured on ETA using several techniques. One method uses a Faraday cup that is remotely movable in two-transverse dimensions (x, y). In another method a small diameter wire or pellet target is moved across the beam and the bremsstrahlung x-ray intensity is plotted. Data for these methods are recorded using a Tektronix 7912 digitizer at 16 equally spaced times during 50 ns. Three other methods use a time gated (4 ns) microchannel plate television camera to record a two-dimensional image of the beam intensity on a single pulse. The light sources used for imaging are: Cherenkov light from a Kapton foil, prompt visible light from a titanium foil and radiated light from gas molecules excited by the beam. We are also testing an x-ray pinhole camera using K/sub ..cap alpha../ x-rays from tungsten.