The feasibility of using the products of free-radical copolymerization of modified organosiloxane in the formation of a thermally stable and chemically resistant polymer concrete for use in geothermal environments has been demonstrated. Specimens have been produced using mixtures of organosiloxane containing pendant vinyl groups and styrene or different silicon fluids as a comonomer in conjunction with a free-radical initiator and several aggregate materials. The use of these monomers in conjunction with materials such as SiO/sub 2/ and portland cement to form polymer concrete results in composites with high compressive strength (80 to 100 MPa) and thermal and hydrolytic stability. The results from studies to determine the effect of variables such as sand-particle size, type of cement, and sand-cement ratio are discussed.

Design and field execution of seismic experiments are described that recorded the characteristics of seismic signals from single and multiple explosions conducted at the Nevada Test Site in Yucca Flat, Nevada. Most of the data were obtained from small-scale underground explosions (total yields ranged from a fraction of a pound to 100 lb of explosives) that were designed to permit characterization of seismic signals as a function of explosive-source configuration. Other data were from explosions conducted in the area by others: two underground nuclear detonations with yields below 40 kt each and several surface explosions whose yields ranged from 700 lb to 100 tons. The project included a comprehensive study of the Yucca lake bed, close-range recording of seismic signals from explosions, and excavation of cavities generated by small-scale high-explosive charges. 60 figures, 14 tables.

This fact sheet for distribution at the flash and flow test of HGP-A, July 22, 1976 contains a temperature-depth plot, a brief chronology, and a budget summary. (MHR)

This program plan covers Phase I of an overall program for the development of a 500 to 2000 W/sub e/ (EOM), 7-year life, power system for space vehicles. The system uses a closed Brayton dynamic system to convert energy from an isotope heat source at a net efficiency greater than 25 percent. This first phase, a 35-months effort, is for the conceptual design of a 1300 W/sub e/, 450 lb flight system and the design, fabrication, and test of a ground demonstration system. The flight system will use, for the baseline design, two of the multihundred-watt (MHW) heat sources being developed for the ERDA by the General Electric Company. The Ground Demonstration System will simulate, as closely as possible, the Brayton Isotope Power Flight System and will utilize components and technology being developed by NASA for the Mini-Brayton rotating unit, recuperator and heat source assembly, respectively. The Ground Demonstration System includes a performance test and a 1000-hour endurance test.

The office portion of the building is 4900 ft/sup 2/. The active hydronic space heating system uses 1890 ft/sup 2/ of flat plate air-to-water solar collectors and has 2500 gallons of storage capacity. Included here are the acceptance test plan, operation and maintenance, operating mode table, pictures, and system performance data. (MHR)

Mechanical properties of various weld configurations for 304 LN stainless steel are reported. The results include Charpy V-notch, tensile, and fracture toughness data. The determinations were made at temperatures of 300, 77, and 4.2/sup 0/K. Each of the three types of mechanical evaluations are treated separately.

The Preliminary Design of a Regional, Centralized Solid Waste Management System for the Twin Cities Metropolitan Region in Minnesota is presented. The concept has been developed for the sound environmental and safe disposal of solid waste generated from its health care industry, although some additional waste supplements are included as economic assistance in order to approach a competitive alternative to current health care solid waste disposal costs. The system design focuses on a 132 tons per day high-temperature, slagging pyrolysis system manufactured by Andco Incorporated, Andco-Torrax Division Design criteria are given. A Collection and Transportation System (CTS) has been planned for the movements of solid waste (General and Special) from the generating HHC facilities within a 10-mile waste-shed zone, for municipal solid waste from a local transfer station currently processing municipal solid waste, and for pyrolysis residue to final disposal. Each of these facilities is now considered as service contract operations. Approximately 15 vehicle trips per day are estimated as vehicle traffic delivering the refuse to the pyrolysis facility. Cost estimates for the CTS have been determined in conjunction with current municipal refuse haulers in the TCMR, and valued at the following: HHC General Solid Waste (HHC/GSW) at 6.00 $/T; …

Solid radioactive wastes resulting from chemical separations processing of spent reactor fuels have been disposed by burial in trenches in the 200 Areas since 1944. Solid radioactive wastes from other Hanford facilities and from off-site AEC contractors have also been buried in the 200 Areas` Waste Burial Grounds. Since 1970, industrial wastes containing or suspected of containing transuranic radionuclides have been packaged in concrete boxes and {open_quotes}dry wastes{close_quotes} have been packaged in steel boxes or drums and buried in segregated trenches. A land area of approximately 149 acres has been used to bury 5.2 million cubic feet of contaminated solid waste through calendar year 1971. Annual reports of radioactive solid waste burials issued, beginning in 1968, have shown land area used, and volume and quantity of radioactivity grams U and/or Pu and curies buried. No corrections for radioactive decay have been reported. In July 1972, J. D. Anderson, G. L. Hanson, G. R. Kiel, B. J. McMurray, and N. P. Nisick were assigned the responsibility for a study to provide the decayed inventory of radioactivity in each solid waste burial ground in the 200 Areas. The results of this study are included as Tables 1 and 2 in this report.

The tests conducted on the /sup 1///sub 5/-scale BWR Mark I pressure suppression test facility simulate the three-dimensional transient conditions that are encountered in a wetwell pressure suppression system during a hypothetical loss-of-coolant accident (LOCA). Specifically, the nitrogen (N/sub 2/)-driven air clearing phase tests discussed were performed to obtain the air/water-induced dynamic vertical load function and to determine the response of a 90/sup 0/ sector of a 360/sup 0/ torus structure.

Space charge neutralization of ion beams results from plasma generated by the beam. The two dimensional flow of plasma to walls surrounding a beam is analyzed to provide spatial distributions. Negative ion beams receive particular attention; the results are applied to electron control in beams subject to post-acceleration.

The distribution of geothermal resources in relation to the location of population centers in the U.S. is considered. Capital aspects of district heating systems are discussed. Estimates are given of distribution network capital investment as a function of population in service area. Swedish and Icelandic cost experience is taken into consideration. The need for more specific assessment of the potential for direct use of geothermal energy is cited. (JGB)

This review contains more than 100 observations and 224 references on the dissolution phenomenon. The dissolution processes are grouped into three categories: methods of aqueous attack, fusion methods, and miscellaneous observations on phenomena related to dissolution problems. (DLC)

Large quantities of bulk powder can be separated according to particle size and density by air classifiers. Classifiers disperse the powder and usually achieve size differentiation by drag and centrifugal forces acting on individual particles in the gas stream. A Donaldson ''acucut'' Classifier for the separation of B/sub 4/C powder is evaluated. Experimental tests were conducted to determine the particle cut sizes and powder yields obtained by variation of operating parameters. To assess the classifier's performance further results of the sharpness of the powder cuts were evaluated and compared with the vendor's prediction. 7 figures, 3 tables.

Several contemporary proton-recoil detectors are described and compared. These detectors have been used for neutron-spectrum measurements over various portions of the 10-keV-to-20-MeV energy range. Several factors which limit the accuracy of the results are compared quantitatively. General suggestions are given for setting and using standard cross sections and for future developments using the n,p scattering reaction.

The extent to which earth subsidence may be caused by in situ coal gasification is studied using the method of finite elements. This study takes into account rock failure modes and nonlinearity of rock stiffness. Two models were studied for the site at Hoe Creek, where a coal seam is overlain and underlain by interbedded clays and sandstones. These two studies are expected to bracket any subsidence that may occur. Maximum subsidence was 0.06 in. using the stiff model and 3.5 in. using the soft model, neither of which suggests undesirably large subsidence.

A Tektronix-31 (Tektronix Inc. Beaverton, Oregon) desk top calculator program, which is used as a backup to the PDP-8/I computer program, is described. The program yields interplanar (d) spacings and (2theta) angle values from measurements made on an x-ray diffraction film of a powdered sample of a crystalline material. Use of the calculator provides accurate computations in a relatively rapid time interval when the PDP-8/I is not functioning because of downtime for repairs, maintenance, etc.

Performance of laser fusion targets depends critically on the characteristics of the incident beam. The spatial distribution and temporal behavior of the light incident on the target varies significantly with power, with choice of beam spatial profile and with location of spatial filters. On each ARGUS shot we photograph planes in the incident beams which are equivalent to the target plane. Array cameras record the time integrated energy distributions and streak cameras record the temporal behavior. Computer reduction of the photographic data provides detailed spatial energy distributions, and instantaneous power on target vs. time. Target performance correlates with the observed beam characteristics.

Previous studies by Behrens have provided evidence of systematic behavior in neutron-induced fission cross sections in the incident neutron energy range 3 to 5 MeV. Recently measured fission cross-section ratios revealed this behavior. In this report, these measurements and those of others are used to illustrate the behavior of fission cross sections over the neutron energy range 0.1 MeV to 15 MeV. Similar trends are seen at 0.0253 eV, as revealed by thermal cross-section measurements. 12 figures.

As laser capabilities increase, implosions will be performed to achieve high densities. Criteria are discussed for formation of a low-density corona, preheated supersonically, which increases the tolerance of high convergence implosions to non-uniform illumination by utilizing thermal smoothing. We compare optimized double shell target designs without and with atmosphere production. Two significant penalties are incurred with atmosphere production using 1 ..mu..m laser light. First, a large initial shock at the ablation surface limits the pulse shaping flexibility, and degrades implosion performance. Second, the mass and heat capacity of the atmosphere reduce the energy delivered to the ablation surface and the driving pressures obtained for a given input energy. Improvement is possible using 2 ..mu..m light for the initial phase of the implosion. We present results of 2-D simulations which evaluate combined symmetry and stability requirements. At l = 8, the improvement produced in the example is a factor of 10, giving tolerance of 10 percent.

The suitability of Tophet C-Alloy 52/Kovar weldments to hydrogen embrittlement were investigated because of their potential as candidate materials in fabrication of minaturized initiators for pyrotechnics. Cathodic charged samples were statically loaded for extended periods of time resulting in no load failures and in ductile fracture surfaces indicating resistance to hydrogen embrittlement. 20 figures.

Recent experiments at the LLL 2.0 terawatt laser irradiation facility Argus have been conducted on glass microshells filled with equimolar DT gas. A variety of microshell dimensions and laser pulse widths have been used with the best results producing in excess of 10/sup 8/ fusion reactions. Numerical simulation of selected experiments using the LASNEX computer code confirm the measured performance. Peak DT ion temperatures of about 5 keV and densities of .2 gm/cm/sup 3/ are calculated and are in agreement with that from neutron time-of-flight and alpha particle spectral measurements together with x-ray diagnostics. Laser light absorption is about 20% efficient. General characteristics of ''exploding pusher'' targets will be discussed.

Two approaches for calculating soil structure interaction (SSI) are compared: finite element and lumped mass. Results indicate that the calculations with the lumped mass method are generally conservative compared to those obtained by the finite element method. They also suggest that a closer agreement between the two sets of calculations is possible, depending on the use of frequency-dependent soil springs and dashpots in the lumped mass calculations. There is a total lack of suitable guidelines for implementing the lumped mass method of calculating SSI, which leads to the conclusion that the finite element method is generally superior for calculative purposes.

A computer-assisted chemical modeling study of equilibria in flowing brine systems has been undertaken. Equilibria between liquid and volatile components of two-phase fluids have profound effects on such important phenomena as corrosion, scale formation, environmental quality, and the economics of energy extraction. The principal reactions considered are those involving volatiles naturally present in the fluid, including NH/sub 3/, H/sub 2/S and CO/sub 2/. A computer code is described which performs stepwise equilibrium computations at 1/sup 0/C intervals for a unit mass of fluid, between reservoir and reinjection temperatures. The data base used is the quality-temperature function for the brine, the chemical composition, and equilibrium constants for the solubility reactions of gases and dissociation of their aqueous species. Chemical changes that take place during cooling and expansion are illustrated by distribution diagrams. Although the computations were developed for application to the high-saline resource, they are not fluid or system-specific, and should be of general usefulness where a chemical composition and temperature history can be specified.

Concepts of the range of investigation of a borehole gravimeter are reviewed. It is shown that the maximum sensitivity to a mass point at a horizontal distance R from a borehole occurs at a vertical distance Z = R/..sqrt..2. Thus, the angle of maximum sensitivity is about 55/sup 0/ from the vertical. It is also shown that the absolute value of the gravitational effect decreases with increasing R. There are two maxima of the vertical gradient of gravity (at Z = 0 and at Z = ..sqrt../sup 3///sub 2/ R). The minimum distance required between gravimeter stations to obtain a usable measurement can be determined. The slab radius R for which the gravitational effect of a horizontal slab is equal to 45%, 90%, etc., of that of an infinite horizontal slab is a function of the measurement spacing. The closer the measurement spacing, the more information obtained.