The ARM sites and the ARM Mobile Facility (AMF) were constructed to make measurements of the atmosphere and radiation system in order to quantify deficiencies in the simulation of clouds within models and to make improvements in those models. While the measurement infrastructure of ARM is well-developed and a model parameterization testbed capability has been established, additional effort is needed to develop statistical techniques which permit the comparison of simulation output from atmospheric models with actual measurements. Our project establishes a new methodology for objectively comparing ARM measurements to the outputs of leading global climate models and reanalysis data. The quantitative basis for this comparison is provided by a statistical procedure which establishes an exhaustive set of mutually-exclusive, recurring states of the atmosphere from sets of multivariate atmospheric and cloud conditions, and then classifies multivariate measurements or simulation outputs into those states. Whether measurements and models classify the atmosphere into the same states at specific locations through time provides an unequivocal comparison result. Times and locations in both geographic and state space of model-measurement agreement and disagreement will suggest directions for the collection of additional measurements at existing sites, provide insight into the global representativeness of the current ARM sites …

The 100-B-14:1 subsite encompasses the former process sewer main associated with the 105-B Reactor Building, 108-B Chemical Pumphouse and Tritium Separation Facility, 184-B Boiler House and the 100-B water treatment facilities, as well as the feeder lines associated with the 108-B facility, formerly discharging to the 116-B-7 Outfall Structure. The subsite has been remediated to achieve the remedial action objectives specified in the Remaining Sites ROD. The results of verification sampling demonstrated that residual contaminant concentrations do not preclude any future uses and allow for unrestricted use of shallow zone soils. The results also showed that residual contaminant concentrations are protective of groundwater and the Columbia River.

None

The project covered by this report focused on development of efficient but robust non-linear inversion algorithms for electromagnetic induction data, in particular for data collected with multiple receivers, and multiple transmitters, a situation extremely common in eophysical EM subsurface imaging methods. A key observation is that for such multi-transmitter problems each step in commonly used linearized iterative limited memory search schemes such as conjugate gradients (CG) requires solution of forward and adjoint EM problems for each of the N frequencies or sources, essentially generating data sensitivities for an N dimensional data-subspace. These multiple sensitivities allow a good approximation to the full Jacobian of the data mapping to be built up in many fewer search steps than would be required by application of textbook optimization methods, which take no account of the multiplicity of forward problems that must be solved for each search step. We have applied this idea to a develop a hybrid inversion scheme that combines features of the iterative limited memory type methods with a Newton-type approach using a partial calculation of the Jacobian. Initial tests on 2D problems show that the new approach produces results essentially identical to a Newton type Occam minimum structure inversion, while running …

We adapt the "reverse taper" scheme presented by Saldin etal. (Phys. Rev. ST Accel. Beams, 9, 050702 [2006]) for attosecond pulseproduction to the XUV/soft-xray regime. We find that that GW-level pulsesof a few femtosecond duration or shorter can be produced using electronbeams of quite moderate parameters and undulators of 20-m length orshorter. The output pulse is significantly shifted in wavelength relativeto the main background which permits a further increase in contrast ratiovia simple monochromatization. Moreover, the output pulse has a naturalwavelength chirp that allows further temporal compression, if wanted.Both positive and negative chirps can be produced depending uponthe signof the undulator taper.

The goals of the S.H. Strauss laboratory portion of 'Genome-enabled discovery of carbon sequestration genes in poplar' are (1) to explore the functions of candidate genes using Populus transformation by inserting genes provided by Oakridge National Laboratory (ORNL) and the University of Florida (UF) into poplar; (2) to expand the poplar transformation toolkit by developing transformation methods for important genotypes; and (3) to allow induced expression, and efficient gene suppression, in roots and other tissues. As part of the transformation improvement effort, OSU developed transformation protocols for Populus trichocarpa 'Nisqually-1' clone and an early flowering P. alba clone, 6K10. Complete descriptions of the transformation systems were published (Ma et. al. 2004, Meilan et. al 2004). Twenty-one 'Nisqually-1' and 622 6K10 transgenic plants were generated. To identify root predominant promoters, a set of three promoters were tested for their tissue-specific expression patterns in poplar and in Arabidopsis as a model system. A novel gene, ET304, was identified by analyzing a collection of poplar enhancer trap lines generated at OSU (Filichkin et. al 2006a, 2006b). Other promoters include the pGgMT1 root-predominant promoter from Casuarina glauca and the pAtPIN2 promoter from Arabidopsis root specific PIN2 gene. OSU tested two induction systems, alcohol- and …

The main purpose of this project was to advance the basic scientific understanding of colloid and colloid-facilitated Cs transport of radionuclides in the vadose zone. We focused our research on the hydrological and geochemical conditions beneath the leadking waste tanks at the USDOE Hanford reservation. Specific objectives were (1) to determine the lability and thermodynamic stability of colloidal materials, which form after reacting Hanford sediments with simulated Hanford Tank Waste, (2) to characterize the interactions between colloidal particles and contaminants, i.e., Cs and Eu, (3) to determine the potential of Hanford sediments for in situe mobilization of colloids, (4) to evaluate colloid-facilitated radionuclide transport through sediments under unsaturated flow, (5) to implement colloid-facilitated contaminant transport mechanisms into a transport model, and (6) to improve conceptual characterization of colloid-contaminant-soil interactions and colloid-facilitated transport for clean-up procedures and long-term risk assessment.

Increasing observational evidence gathered especially in X-rays and {gamma}-rays during the course of the last few years support the notion that Supernova remnants (SNRs) are Galactic particle accelerators up to energies close to the ''knee'' in the energy spectrum of Cosmic rays. This review summarizes the current status of {gamma}-ray observations of SNRs. Shell-type as well as plerionic type SNRs are addressed and prospect for observations of these two source classes with the upcoming GLAST satellite in the energy regime above 100 MeV are given.

We present an update of our results for the electron-cloud build-up for several upgrades proposed for the LHC injectors. Specifically, we have re-examined our published results for the ecloud heat load [1] from the perspective of numerical convergence of the simulations vis-a-vis the integration time step {Delta}t. We repeated most of the simulations with ever smaller values of {Delta}t until we reached stable results, indicating numerical convergence; this was achieved at 200-500 slices per bunch, depending on the particular case. In all cases examined, the simulated heat load decreases monotonically, until the limit is reached, as {Delta}t decreases in the range explored, hence the stable results are more favorable vis-a-vis the heat load than the previous ones. This is particularly true for a bunch spacing t{sub b} = 25 ns.

We address the problem of classification in a partially labeled network (a.k.a. within-network classification), with an emphasis on tasks in which we have very few labeled instances to start with. Recent work has demonstrated the utility of collective classification (i.e., simultaneous inferences over class labels of related instances) in this general problem setting. However, the performance of collective classification algorithms can be adversely affected by the sparseness of labels in real-world networks. We show that on several real-world data sets, collective classification appears to offer little advantage in general and hurts performance in the worst cases. In this paper, we explore a complimentary approach to within-network classification that takes advantage of network structure. Our approach is motivated by the observation that real-world networks often provide a great deal more structural information than attribute information (e.g., class labels). Through experiments on supervised and semi-supervised classifiers of network data, we demonstrate that a small number of structural features can lead to consistent and sometimes dramatic improvements in classification performance. We also examine the relative utility of individual structural features and show that, in many cases, it is a combination of both local and global network structure that is most informative.

This tech base award has close links with the Viral Identification Characterization Initiative (VICI) ER LDRD. The tech base extends developed code to enable a capability for biodefense, biosurveillance, and clinical diagnostics. The code enables the design of signatures to detect and discover viruses, without relying on prior assumptions as to the species of virus present. This approach for primer and signature design contrasts with more traditional PCR approaches, in which a major weakness is the unlikelihood of viral discovery or detection of unanticipated species. There were three crucial areas of the project that were not research and development, so could not be funded under the ER LDRD, but were a reduction to practice of the existing VICI algorithm that were necessary for the success of overall computational project goals. These areas, funded by the 2007 Tech Base award, were: (1) improvement of the code developed under the VICI LDRD by incorporating T{sub m} and free energy predictions using Unafold; (2) porting of code developed on the kpath Sun Solaris cluster to the Yana and Zeus LC machines; and (3) application of that code to perform large numbers of simulations to determine parameter effects.

A three-stage process was developed at Lawrence Livermore National Laboratory to treat potentially pyrophoric depleted uranium metal wastes. The three-stage process includes waste sorting/rinsing, acid dissolution of the waste metal with a hydrochloric and phosphoric acid solution, and solidification of the neutralized residuals from the second stage with clay. The final product is a solid waste form that can be transported to and disposed of at a permitted low-level radioactive waste disposal site.

Plasma density gradients in a gas jet were used to control the wake phase velocity and trapping threshold in a laser wakefield accelerator, producing stable electron bunches with longitudinal and transverse momentum spreads more than ten times lower than in previous experiments (0.17 and 0.02 MeV/c FWHM, respectively) and with central momenta of 0.76 +- 0.02 MeV/c. Transition radiation measurements combined with simulations indicated that the bunches can be used as a wakefield accelerator injector to produce stable beams with 0.2 MeV/c-class momentum spread at high energies.

We present a sample microstate for a black ring in four and five dimensional language. The microstate consists of a black string microstate with an additional D6-brane. We show that with an appropriate choice of parameters the piece involving the black string microstate falls down a long AdS throat, whose M-theory lift is AdS_3 x S2. We wrap a spinning dipole M2-brane on the S2 in the probe approximation. In IIA, this corresponds to a dielectric D2-brane carrying only D0-charge. We conjecture this is the firstapproximation to a cloud of D0-branes blowing up due to their non-abelian degrees of freedom and the Myers effect.

Round wire Bi 2212 is emerging as a viable successor ofNb3Sn in High Energy Physics and Nuclear Magnetic Resonance, to generatemagnetic fields that surpass the intrinsic limitations of Nb3Sn. Ratherbold claims are made on achievable magnetic fields in applications usingBi 2212, due to the materials' estimated critical magnetic field of 100 Tor higher. High transport currents in high magnetic fields, however, leadto large stress on, and resulting large strain in the superconductor. Theeffect of strain on the critical properties of Bi-2212 is far fromunderstood, and strain is, as with Nb3Sn, often treated as a secondaryparameter in the design of superconducting magnets. Reversibility of thestrain induced change of the critical surface of Nb3Sn, points to anelectronic origin of the observed strain dependence. Record breaking highfield magnets are enabled by virtue of such reversible behavior. Straineffects on the critical surface of Bi-2212, in contrast, are mainlyirreversible and suggest a non-electronic origin of the observed straindependence, which appears to be dominated by the formation of cracks inthe superconductor volumes. A review is presented of available results onthe effects of strain on the critical surface of Bi-2212, Bi-2223 andYBCO. It is shown how a generic behavior emerges for the (axial) straindependence of the critical …

In the near future, the United States will be facing constraints on energy availability due to the heightened demand for both energy and water, especially during droughts and summers. Increasing stress on the inextricably linked resource availability of both water and energy can be mitigated with integrated planning. Exchanging data is an important component to current and future mitigation approaches within the Energy-Water Nexus. We describe the types of relationships that are formed in the United States EWN, and address the data sharing obstacles within. Approaches to removing the obstacles of data sharing are presented, based on case studies.

None

A National Pollutant Discharge Elimination System (NPDES) Permit was issued to the Savannah River Site (SRS) by the South Carolina Department of Health and Environmental Control (SCDHEC) and became effective on December 1, 2003. The new permit contained revised limits for copper and zinc derived by adjusting the South Carolina aquatic life water quality standards in accordance with dissolved metals criteria. The new copper and zinc limits are very low and may not be met consistently at Outfall H-12. The outfall has periodically exceeded the new 6 {micro}g/l (0.006 mg/L) monthly average limit and the 8 {micro}g/l (0.008 mg/L) maximum limit for copper and recently has begun exceeding the 100 {micro}g/l (0.100 mg/L) limit for zinc. The compliance date for Outfall H-12 is November 1, 2008. A study was conducted on this outfall and other outfalls to evaluate possible alternatives for meeting the new permit limits (Shipman and Bugher 2004). The study team recommended construction of a peat bed for treatment of the Outfall H-12 effluent. This recommendation was repeated by a second alternatives study team in 2007 (WSRC 2007). A bench-scale laboratory study demonstrated the feasibility of peat-bed treatment for Outfall H-12 effluent, with the peat demonstrating excellent removal …

None

The world-wide network of nuclear reaction data centers (NRDC) has, for about 40 years, provided data services to the scientific community. This network covers all types of nuclear reaction data, including neutron-induced, charged-particle-induced, and photonuclear data, used in a wide range of applications, such as fission reactors, accelerator driven systems, fusion facilities, nuclear medicine, materials analysis, environmental monitoring, and basic research. The now 13 nuclear data centers included in the NRDC are dividing the efforts of compilation and distribution for particular types of reactions and/or geographic regions all over the world. A central activity of the network is the collection and compilation of experimental nuclear reaction data and the related bibliographic information in the EXFOR and CINDA databases. Many of the individual data centers also distribute other types of nuclear data information, including evaluated data libraries, nuclear structure and decay data, and nuclear data reports. The network today ensures the world-wide transfer of information and coordinated evolution of an important source of nuclear data for current and future nuclear applications.

The EMPIRE code system is being extended to cover the resolved and unresolved resonance region employing proven methodology used for the production of new evaluations in the recent Atlas of Neutron Resonances. Another directions of Empire expansion are uncertainties and correlations among them. These include covariances for cross sections as well as for model parameters. In this presentation we concentrate on the KALMAN method that has been applied in EMPIRE to the fast neutron range as well as to the resonance region. We also summarize role of the EMPIRE code in the ENDF/B-VII.0 development. Finally, large scale calculations and their impact on nuclear model parameters are discussed along with the exciting perspectives offered by the parallel supercomputing.

Streak cameras continue to be useful tools for studying phenomena on the picoseconds time scale. We have employed accelerator modeling tools to understand and possibly improve the time resolution of present and future streak cameras. This effort has resulted in an end-to-end model of the camera. This model has contributed to the recent measurement of 230 fsec (FWHM) resolution measured at 266 nm in the Advanced Light Source Streak Camera Laboratory. We describe results from this model that show agreement with the experiments. We also extrapolate the performance of this camera including several possible improvements.

Higher Field Magnets demand higher field materials such as Bi-2212 round superconducting wire. The Bi-2212 wire manufacture process depends on the coil fabrication method and wire insulation material. Considering the wind-and-react method, the coil must unifirmly heated to the melt temperature and uniformly cooled to the solidification temperature. During heat treat cycle for tightly wound coils, the leakage melt from conductor can chemically react with insulation on the conductor and creat short turns in the coils. In this research project, conductor, insulation, and coils are made to systemically study the suitable insulation materials, coil fabrication method, and heat treatment cycles. In this phase I study, 800 meters Bi-2212 wire with 3 different insulation materials have been produced. Best insulation material has been identified after testing six small coils for insulation integrity and critical current at 4.2 K. Four larger coils (2" dia) have been also made with Bi-2212 wrapped with best insulation and with different heattreatment cycle. These coils were tested for Ic in a 6T background field and at 4.2 K. The test result shows that Ic from 4 coils are very close to short samples (1 meter) result. It demonstrates that HTS coils can be made with Bi-2212 …

In this report, I assess the feasibility of using Mie scattering to quantify the diameter distribution of {sup 3}He bubbles in DT ice layers. Mie scattering methods are often used for He diameter m measurements of particulates in emulsions like pigments and ink products. These measurements suggests that similar techniques could be used to measure the distribution of {sup 3}He bubbles He in DT ice layers, which is important for NIF ICF capsules. To investigate the achievable performance of bubble diameter measurements using Mie scattering, I performed numerical modeling using exact analytical expressions.