This paper covers Maxwell's approach to developing energy storage capacitors. Based on previous capacitor designs of 3 KJ, 5 KJ and 10 KJ, the final Nova 12.5 KJ capacitor evolved. At the outset of the Nova capacitor development program, a relatively new dielectric system, polypropylene-paper-DOP, seemed to show superiority in volumetric efficiency, life, and more importantly cost. However, as a result of studies performed at Maxwell, a high-density, energy-storage capacitor was developed utilizing new high-quality, high-density paper and caster oil as the dielectric. Test data have demonstrated that the Maxwell 12.5 KJ capacitor exceeds all LLNL's qualification requirements.

Ductile long range ordered alloys having high critical ordering temperatures exist in the (V,M)(Fe,Ni,Co)/sub 3/ system having the composition comprising by weight 20.6 to 22.6% V, 14 to 50% Fe, 0 to 64% Co, and 0 to 40% Ni, and 0.4 to 1.4% M, where M is a metal selected from the group consisting of Ti, Zr, Hf, and their mixtures. These modified alloys have an electron density no greater than 8.00 and exhibit marked increases at elevated temperature in ductility and other mechanical properties over previously known ordered alloys.

A coal gasification operation or similar conversion process is carried out in the presence of an alkali metal-containing catalyst producing char particles containing alkali metal residues. Alkali metal constituents are recovered from the particles by burning the particles to increase their size and density and then leaching the particles of increased size and density with water, to extract the water-soluble alkali metal constituents.

An auto-ranging ac resistance measuring instrument for remote measurement of the resistance of an electrical device or circuit connected to the instrument includes a signal generator which generates an ac excitation signal for application to a load, including the device and the transmission line, a monitoring circuit which provides a digitally encoded signal representing the voltage across the load, and a microprocessor which operates under program control to provide an auto-ranging function by which range resistance is connected in circuit with the load to limit the load voltage to an acceptable range for the instrument, and an auto-compensating function by which compensating capacitance is connected in shunt with the range resistance to compensate for the effects of line capacitance.

A catalytic cartridge internally heated is utilized as a SO/sub 3/ decomposer for thermochemical hydrogen production. The cartridge has two embodiments, a cross-flow cartridge and an axial flow cartridge. In the cross-flow cartridge, SO/sub 3/ gas is flowed through a chamber and incident normally to a catalyst coated tube extending through the chamber, the catalyst coated tube being internally heated. In the axial-flow cartridge, SO/sub 3/ gas is flowed through the annular space between concentric inner and outer cylindrical walls, the inner cylindrical wall being coated by a catalyst and being internally heated. The modular cartridge decomposer provides high thermal efficiency, high conversion efficiency, and increased safety.

GCRA has approached the initial review of the subject plans from the vantage of Utility/User interests in an HTGR-SC/C Lead Project as characterized in the HTGR-SC/C Lead Project Plan. At their current stage of development, the plans are considered to represent the early views of General Atomic Company, acting as a potential NSSS vendor, on the effort necessary to design and license an HTGR-SC/C plant. As such, these plans embody GA's perception of the level of technical development and demonstration needed to support the cost and risk sharing assumptions in the Lead Project Plan. These plans and the plant design which they address will be subjected to a more formal review by other vendor and Utility interests in the course of establishing the Project Decision Package scheduled for June 1982. The culmination of these review activities will be the adoption of this information by all participants as the HTGR-SC/C Program Baseline.

Procedures are described for the systematic assessment of a Material Control and Accounting (MC and A) system, in terms of compliance to the proposed MC and A Upgrade Rule. The applicability of these assessment procedures to specific Rule provisions is discussed. Special attention is given to the statistical performance of individual subsystems, and their vulnerability to compromise by insider collusion.

Test results from two plasma direct converters and their predicted cost and performance on tandem mirror fusion reactors are present. The tests were done at high power density (approx. 70 W/cm/sup 2/) in steady state to simulate the predicted conditions in a reactor. A single stage unit and a two-stage unit of the Venetian blind type were tested at up to 100 kV and 6 kW for a total time of about 80 hours. Measured efficiencies, when projected to a reactor, are typically about 50% for a single stage unit and 60 to 70% for a two-stage unit, depending on the energy distribution of the ions, the degree of subdivision of the collectors, and on the gas pressure. The high ambipolar potential in tandem mirror devices makes this good efficiency possible. When radiatively cooled grids are used, the incident power density is limited to about 100 W/cm/sup 2/ by the thermionic emission of electrons.

Several high explosive formulations have recently been compared in a series of impact tests where samples of each composition were encased in a test fixture designed in flat geometry mocking an HE loaded artillery projectile. The purpose of the ongoing test series is to determine the relative rate of chemical energy release or explosiveness of several standard and research insensitive high explosive (IHE) main charge compositions. The triggering stimulus is the impact of .30 calibre ball bullets fired at normal muzzle velocity.

Progress is reported in a project in which the objectives are to evaluate benefits associated with control of the surface energetic properties of materials used in heat exchangers, and to identify preferred ranges of these surface conditions that minimize deposits of biological fouling known to deteriorate heat exchange efficiencies in seawater, brackish water and freshwater systems. The technical approach employed uses special diagnostic plates in novel flow cells where fluid flow conditions can be well-controlled, modifying the surface chemistry and surface energy of the plates with very thin coatings and examining the earliest events of biofouling caused by macromolecules and microbial organisms. Information is included on exposure experiments and results and heat exchange experiments.

A study of fission suppressed blankets for the tandem mirror not only showed such blankets to be feasible but also to be safer than fissioning blankets. Such hybrids could produce enough fissile material to support up to 17 light water reactors of the same nuclear power rating. Beryllium was compared to /sup 7/Li for neutron multiplication; both were considered feasible but the blanket with Li produced 20% less fissile fuel per unit of nuclear power in the reactor. The beryllium resource, while possibly being too small for extensive pure fusion application, would be adequate (with carefully planned industrial expansion) for the hybrid because of the large support ratio, and hence few hybrids required. Radiation damage and coatings for beryllium remain issues to be resolved by further study and experimentation. Molten salt reprocessing was compared to aqueous solution reprocessing (thorex). The molten salt reprocessing cost is $3.4/g fissile, whereas aqueous reprocessing cost $24 or $43/g for the thorium metal or oxide fuel form.

By means of a computational approach based on classical molecular dynamics, we can begin to form a realistic picture of shock-induced processes occurring at the shock front and resulting from the detailed, violent motion associated with shock motion on an atomic scale. Prototype studies of phase transitions will be discussed. We will also examine the interaction of the shock front with defects, surfaces, voids, and inclusions, and across grain boundaries. We will focus on the critical question of how mechanical energy imparted to a condensed material by shock loading is converted to the activation energy required to overcome some initial energy barrier in an initiation process.

The MFTF-B ECRH system will provide 1.6-MW of microwave power for heating of electrons within the thermal barrier and potential maximum regions of the plasma end-plugs. Absorption of this radiation increases the resonant electron energy which locally alters the electrostatic confining potential within the plasma. The result is a thermal barrier which will isolate end-plug electrons from those in the solenoid thus increasing the plasma confinement time. Microwave energy will be generated by eight 200 kW gyrotrons located outside the vacuum vessel at strategic positions near each end-plug. High voltage dc power will be obtained from a -90 kV, 90 A power supply. A compensation network will condition the dc power and channel it to eight independent pulse power regulatory/isolation networks. Each of these networks will, on command, provide -80 kV, 8 A of dc power to its attendant gyrotron cabinet positioned within the vault. Each gyrotron will interface to a quasi-optical waveguide which will transport microwave power to an antenna system located inside the vacuum vessel. The antenna systems will direct the microwave radiation into the resonant heating zones of the plasma. A local control and monitoring system will interface to the MFTF-B Supervisory Control and Diagnostics System. This …

We have completed a comparative evaluation of several end plug configurations for tandem mirror fusion reactors with thermal barriers. The axi-cell configuration has been selected for further study and will be the basis for a detailed conceptual design study to be carried out over the next two years. The axi-cell end plug has a simple mirror cell produced by two circular coils followed by a transition coil and a yin-yang pair, which provides for MHD stability. This paper discusses some of the many engineering problems facing the designer. We estimated the direct cost to be 2$/W/sub e/. Assuming total (direct and indirect) costs to be twice this number, we need to reduce total costs by factors between 1.7 and 2.3 to compete with future LWRs levelized cost of electricity. These reductions may be possible by designing magnets producing over 20T made possible by use of combinations of superconducting and normal conducting coils as well as improvements in performance and cost of neutral beam and microwave power systems. Scientific and technological understanding and innovation are needed in the area of thermal barrier pumping - a process by which unwanted particles are removed (pumped) from certain regions of velocity and real space …

A series of experiments were performed in which liquid droplets were caused to collide. Impact velocities to several meters per second and droplet diameters up to 600 micrometers were used. The impact parameters in the collisions vary from zero to greater than the sum of the droplet radii. Photographs of the collisions were taken with a high speed framing camera in order to study the impacts and subsequent behavior of the droplets. The experiments will be discussed and a short movie film presentation of some of the impacts will be shown.

The paper describes the control and instrumentation for the Mirror Fusion Test Facility at the Lawrence Livermore National Laboratory, California, USA. This large-scale scientific experiment in controlled thermonuclear fusion, which is currently being expanded, originally had 3000 devices to control and 7000 sensors to monitor. A hierarchical computer control system, is used with nine minicomputers forming the supervisory system. There are approximately 55 local control and instrumentation microcomputers. In addition, each device has its own monitoring equipment, which in some cases consists of a small computer. After describing the overall system a more detailed account is given of the control and instrumentation for two large superconducting magnets.

The software design of an executive which performs general purpose data acquisition, monitoring, and control is presented. The executive runs on a memory-based mini or micro-computer and communicates with a disk-based computer where data analysis and display are done. The executive design stresses reliability and versatility, and has yielded software which can provide control and monitoring for widely different hardware systems. Applications of this software on two major fusion energy experiments at Lawrence Livermore National Laboratory will be described.

The study of the production and loss of negative ions, H/sup -/ and D/sup -/, in the volume of a plasma has received considerable attention since the measurement of anomalously high densities of H/sup -/ in 1977. The most probable mechanism for production is dissociative attachment (DA) to vibrationally highly-excited hydrogen molecules. New diagnostics developed for this purpose are photodetachment and the extension of coherent anti-Stokes Raman scattering (CARS) systems to the sensitivity required for low-pressure gases. Measurements and calculations indicate that the important loss mechanisms are diffusion to the walls at low densities and collisional destruction of several types at plasma densities above 10/sup 10/ cm/sup -3/. Production mechanisms must be highly efficient to compete with the losses. It appears to be straightforward to extrapolate measurements and theory to the densities above 10/sup 12/ cm/sup -3/ that are required for an intense source of D/sup -/ for neutral beam injection into magnetically-confined fusion devices.

This analysis identifies the economic impacts associated with OTEC development and quantifies them at the national, regional, and industry levels. It focuses on the effects on the United States' economy of the domestic development and utilization of twenty-five and fifty 400 MWe OTEC power plants by the year 2000. The methodology employed was characteristic of economic impact analysis. After conducting a literature review, a likely future OTEC scenario was developed on the basis of technological, siting, and materials requirements parameters. These parameters were used to identify the industries affected by OTEC development; an economic profile was constructed for each of these industries. These profiles established an industrial baseline from which the direct, indirect, and induced economic impacts of OTEC implementation could be estimated. Each stage of this analysis is summarized; and the economic impacts are addressed. The methodology employed in estimating the impacts is described.

Econoimc profiles of the industries most affected by the construction, deployment, and operation of Ocean Thermal Energy Conversion (OTEC) powerplants are presented. Six industries which will contribute materials and/or components to the construction of OTEC plants have been identified and are profiled here. These industries are: steel industry, concrete industry, titanium metal industry, fabricated structural metals industry, fiber glass-reinforced plastics industry, and electrical transmission cable industry. The economic profiles for these industries detail the industry's history, its financial and economic characteristics, its technological and production traits, resource constraints that might impede its operation, and its relation to OTEC. Some of the historical data collected and described in the profile include output, value of shipments, number of firms, prices, employment, imports and exports, and supply-demand forecasts. For most of the profiled industries, data from 1958 through 1980 were examined. In addition, profiles are included on the sectors of the economy which will actualy construct, deploy, and supply the OTEC platforms.

A comparison is made between 1D and 2D hydrocode calculations and some recent experimental results on laser-driven planar shockwaves in disk targets. A simple model is described which accounts for the trends seen in the calculations and which gives insight into the regime of laser intensity and pulse duration where two-dimensional effects become significant in these experiments.

A single-pass continuous-flow leach test of PNL 76-68 glass beads (7 mm dia) was concluded after 420 days of uninterrupted operation. Variables included in the experimental matrix were flow-rate, leachant composition, and temperature. Analysis was conducted on all leachate samples for /sup 237/Np and /sup 239/Pu as well as a number of nonradioactive elements. Results indicated that flow-rate and leachant systematically affected the leach rate, but only slightly. Temperature effects were significant. Plutonium leach rate was lower at higher temperature suggesting that Pu sorption onto the beads was enhanced at the higher temperature. The range of leach rates for all analyzed elements (except Pu), at both temperature, at all three flow rates, and with all three leachant compositions varied only three orders of magnitude. The range of variables used in this experiment covered those expected in many proposed repository environments. The preliminary interpretation of the results also indicated that matrix dissolution may be the dominant leaching mechanism, at least for Np in bicarbonate leachant. Regardless of the leaching mechanism the importance of this study is that it bounds the effects of repository environments when the ground water is oxidizing and when it doesn't reach the waste form until the waste …

The radial Fokker-Planck (RFP) model of A. Futch was modified to treat plasma buildup in the tandem mirror plug and center cell with a self-consistent model (TOARBUC). Two major changes have been made to the original version of this code. First, the center cell is treated as having separate electron and ion confining potentials with the ion potential having the opposite sign of that in a conventional mirror. Second, a two-electron-temperature treatment derived by R. Cohen was included in the present model to allow the plug and center cell to have different T/sub e/'s as observed in the experiment. The following sections explain these changes in greater detail.

None