The production of D/sup -/ by multiple charge-transfer collisions of a D/sup +/ beam in a cesium-vapor target is considered for D/sup +/ energies above 300 eV. The cross sections relevant to D/sup -/ formation are obtained by a least-squares fit of three-charge-state differential equations to experimental yield curves. Implications for production of intense negative-ion beams are discussed, and speculations are made about extrapolation to lower engeries.

A series of ten slicing demonstrations on a multi-wire slurry saw, manufactured by Yasunaga Engineering Company of Japan and distributed by GEOS Corporation of Stamford, Connecticut, was made to evaluate the silicon ingot wafering capabilities. The results revealed that the present sawing capabilities can provide usable wafer area from an ingot 1.05 m/sup 2//kg (e.g., kerf width 0.135 mm and wafer thickness 0.265 mm). Satisfactory surface qualities and excellent yield of silicon wafers were found. One drawback is that the add-on cost of producing wafer from this saw, as presently used, is considerably higher than the systems being developed by Varian and Crystal Systems for the Low-Cost Silicon Solar Array Protect (LSSA), Task II, primarily because the Yasunaga saw uses a large quantity of wire. The add-on cost can be significantly reduced by extending the wire life and/or by reuse of properly plated wire to restore the diameter.

Development of acceptable risk criteria for nuclear waste management requires the translation of publicly determined goals and objectives into definitive issues which, in turn, require resolution. Since these issues are largely of a subjective nature, they cannot be resolved by technological methods. Development of acceptable risk criteria might best be accomplished by application of a systematic methodology for the optimal implementation of subjective values. Multi-attribute decision analysis is well suited for this purpose.

The activities and results of the chalcopyrite materials synthesis effort are described. Deposition of ZnSiAs/sub 2/ on 100 Ge and 111 Si substrates was continued with emphasis on identifying correlations between growth system settings and layer properties such as morphology, uniformity, growth rate, stoichiometry, and crystal structure. Results are discussed.

Research was directed towards the synthesis and characterization of the n-type deposits. The conditions required for growth of the n-type layers were found and the emphasis was then returned to the problem of obtaining thicker layers of p-ZnSiAs/sub 2/ via higher growth rates. The conditions required for consistent epitaxial growth were also pursued. Results are presented.

This TSTF proposal has two principal objectives. The first objective is to provide by mid-FY 1981 a demonstration of the fuel cycle and tritium containment systems which could be used in a Tokamak Experimental Power Reactor for operation in the mid-1980's. The second objective is to provide a capability for further optimization of tritium fuel cycle and environmental control systems beyond that which is required for the EPR. The scale and flow rates in TSTF are close to those which have been projected for a prototype experimental power reactor (PEPR/ITR) and will permit reliable extrapolation to the conditions found in an EPR. The fuel concentrations will be the same as in an EPR. Demonstrations of individual components of the deuterium-tritium fuel cycle and of monitoring, accountability and containment systems and of a maintenance methodology will be achieved at various times in the FY 1979-80 time span. Subsequent to the individual component demonstrations--which will proceed from tests with hydrogen (and/or deuterium) through tracer levels of tritium to full operational concentrations--a complete test and demonstration of the integrated fuel processing and tritium containment facility will be performed. This will occur near the middle of FY 1981. Two options were considered for the …

From 9 January through 20 January 1978, Honeywell conducted a wind tunnel test on a 1/30 scale partial heliostat field. The heliostats were per Honeywell's design developed under the 10 megawatt central receiver pilot electrical power plant subsystem research experiment contract. Likewise, the scaled section of the field geometry duplicated the proposed circular layout. Testing was conducted at the Georgia Institute of Technology's 9 foot subsonic tunnel. The objective of the test was to ascertain from a qualitative standpoint the field effects upon wind loading within a heliostat field. To accomplish this, numerous pressure tap measurements at different heights and at different field positions were taken with varying wind speeds, fence designs, and heliostat gimbal orientations. The Department of Energy specified boundary layer profile was also scaled by 1/30 in order to simulate the total wind effects as accurately as possible taking into account the potentially severe scaling or Reynolds number effects at a 1/30 scale. After initial model set-up within the tunnel and scaled boundary layer generated, 91 separate runs were accomplished. The results do demonstrate the high sensitivity of wind loading upon the collector field due to the actual heliostat orientation and fence geometry. Vertical pressure gradients within …

The development of a grid-connected Integrated Community Energy System (ICES) is described. This system will supply electric power to the Northern States Power Co. in Minnesota and steam for the University of Minnesota, Augsburg College, two Minneapolis hospitals, and the Dept. of Health building. The fossil-fuel power plant would be located on the University of Minnesota campus. The costs, financing, and legal agreements involved in this project are presented and discussed. (LCL)

Specifications are presented for major components of the dual-purpose power plant to be located on the University of Minnesota campus. This power plant will supply steam and electric power to a proposed grid-connected Integrated Community Energy System. The capital costs and capital budget for the power plant and specifications for auxiliary equipment, such as the interconnecting heat tunnel, are included. (LCL)

Specifications are presented for the electrical equipment, site preparation, building construction and mechanical systems for a dual-purpose power plant to be located on the University of Minnesota campus. This power plant will supply steam and electrical power to a grid-connected Integrated Community Energy System. (LCL)

The preliminary design of a dual-purpose power plant to be located on the University of Minnesota is described. This coal-fired plant will produce steam and electric power for a grid-connected Integrated Community Energy System. (LCL)

A grid-connected Integrated Community Energy System (ICES) with a coal-burning power plant located on the University of Minnesota campus is planned. The cost benefit analysis performed for this ICES, the cost accounting methods used, and a computer simulation of the operation of the power plant are described. (LCL)

The Preliminary Design of a Regional, Centralized Solid Waste Management System for the Twin Cities Metropolitan Region in Minnesota is presented. The concept has been developed for the sound environmental and safe disposal of solid waste generated from its health care industry, although some additional waste supplements are included as economic assistance in order to approach a competitive alternative to current health care solid waste disposal costs. The system design focuses on a 132 tons per day high-temperature, slagging pyrolysis system manufactured by Andco Incorporated, Andco-Torrax Division Design criteria are given. A Collection and Transportation System (CTS) has been planned for the movements of solid waste (General and Special) from the generating HHC facilities within a 10-mile waste-shed zone, for municipal solid waste from a local transfer station currently processing municipal solid waste, and for pyrolysis residue to final disposal. Each of these facilities is now considered as service contract operations. Approximately 15 vehicle trips per day are estimated as vehicle traffic delivering the refuse to the pyrolysis facility. Cost estimates for the CTS have been determined in conjunction with current municipal refuse haulers in the TCMR, and valued at the following: HHC General Solid Waste (HHC/GSW) at 6.00 $/T; …

The University of Minnesota Grid-ICES was divided into four identifiable programs in order to study the feasibility of each of the parts of the ICES independently. The total program involves cogeneration, fuel conversion, fuel substitution, and energy conservation by system change. This Phase II report substantiates the theory that the Basic Grid ICES is not only energy-effective, but it will become cost effective as unit operating costs adjust to supply and demand in the 1980's. The Basic Program involves the cogeneration of steam and electricity. The University of Minnesota has been following an orderly process of converting its Central Heating Plant from gas-oil to 100% coal since 1973. The first step in the transition is complete. The University is presently 100% on coal, and will begin the second step, the test burning of low Btu Western coal during the spring, summer, and fall, and high Btu Eastern coal during the high thermal winter period. The final step to 100% Western coal is planned to be completed by 1980. In conjunction with the final step a retired Northern States Power generating plant has been purchased and is in the process of being retrofitted for topping the existing plant steam output during …

The University of Minnesota is studying and planning a grid connected integrated community energy system to include disposal of wastes from health centers and utilizing the heat generated. The University of Minnesota has purchased the so called Southeast Generating Station from the Northern States Power Company. This plant contains two coal-fired boilers that will be retrofitted to burn low-sulfur Montana coal. Building modifications and additions will be made to support the components of the Andco-Torrax system and integrate the system with the rest of the plant. The Andco-Torrax system is a new high-temperature refuse-conversion process known technically as slagging pyrolysis. Although the pyrolysis of solid waste is a relatively new innovation, pyrolysis processes have been used for years by industry. This report covers the preliminary design and operation of the system. (MCW)

In this preliminary report for Phase II of Health Education Authority of Louisiana's (HEAL) ICES program, specific elements of the basic intitutional issues were readdressed, as requested by the U.S. Department of Energy. The draft environmental assessment was reassessed and updated. Thermal energy demand profiles for the major community sectors, i.e., the five institutions comprising the HEAL Complex, were refined on a month-by-month basis and resulted in establishing ICES plant systems design capacities of 121,500 pounds per hour demand and 418,175,000 pounds per year for steam; 10,000 tons demand and 38,885,000 ton-hours per year for cooling. From these values the concept of the plant was developed. The Phase I capital cost estimate was updated. Total capital cost is now indicated as $29,960,500. The Phase I operating cost estimate was updated, with that figure now $8,468,479. The Phase I financial analysis was updated, producing an estimated annual revenue level of $9,907,062.

Experimental research in high energy physics is summarized. A list of publications is included. (JFP)

Various plants that might play a role in the energy mix of the future are discussed and illustrated. Included among them are the Euphorbias and Guayule. (JGB)

This volume supplements Vol. 2 and consists entirely of computer printouts. The report consists of three parts: (1) hourly log of plant simulation based on 1982 ICES Community, with thermal storage, on-peak and off-peak electric generation, and 80% maximum kW trip-off; (2) same as (1) except without thermal storage; and (3) hourly load and demand profiles--1979, 1980, and 1982 ICES communities.

This draft report summarizes an economic analysis based upon the assumption of Public Service Electric and Gas Company's ownership and operation of the ICES plant and distribution system. Therefore, the parameters of the analysis are PSE and G's standard engineering practices, standard instrumentation and controls design, standard operating procedures, and standard estimating methods. The value of electric energy was assumed to be the Pennsylvania-Jersey-Maryland Power Interconnection off-peak and on-peak incremental energy costs. The resulting analysis showed the ICES operating at a levelized annual penalty in 1982 dollars of $2.5 to $3.0 million. The draft material in this document contains two sections: the material prepared directly by PSE and G and the remainder of the workscope items. The conclusions are summarized, the main one being that the site-specific Trenton plant results in the cost penalty. A second conclusion states that although operation of the ICES, as compared to the conventional alternative of providing thermal and electric energy to the Trenton ICES Community, would be more energy-efficient, it would result in an additional oil consumption of about 11,000 barrels per year. It is further concluded though, that there are no apparent insurmountable institutional hurdles in implementing the Trenton ICES plan. The most …

Preliminary design and evaluation for the system has been carried out. The findings of this study are: (1) it is technically feasible, utilizing commercially available hardware; (2) under utility ownership and operation, it will not be economically competitive with conventional alternatives for heating and cooling buildings (analysis contained in companion report under separate cover); (3) under utility ownership and operation, no restrictions have been identified that would prevent the project from proceeding; (4) under community ownership, preliminary analysis indicates that thermal energy produced by Trenton ICES will be approximately 12 percent less expensive than thermal energy produced by oil-fired boilers; and (5) a review and update of institutional analyses performed during Phase 2 has identified no factors that would preclude community ownership and operation of the Trenton ICES. The background data produced for the analysis of the Trenton ICES based on utility ownership and operation can, in large part, be used as the bases for a detailed analysis of community ownership.

Separate abstracts were prepared for each of the three included sections. (MOW)

Results from recent integral decay-power experiments are presented and compared with summation calculations. The experiments include the decay power following thermal fission of /sup 233/U, /sup 235/U, and /sup 239/Pu. The summation calculations use ENDF/B-IV decay data and yields from Versions IV and V. Limited comparisons of experimental ..beta.. and ..gamma.. spectra with summation calculations using ENDF/B-IV are included. Generalized least-squares methods are applied to the recent /sup 235/U and /sup 239/Pu decay-power experiments and summation calculations to arrive at evaluated values and uncertainties. Results for /sup 235/U imply uncertainties less than 2% (1 sigma) for the ''infinite'' exposure case for all cooling times greater than 10 seconds. The uncertainties for /sup 239/Pu are larger. Accurate analytical representations of the decay power are presented for /sup 235/,/sup 238/U, and /sup 239/Pu for use in light-water reactors and as the nominal values in the new ANS 5.1 Draft Standard (1978). Comparisons of the nominal values with ENDF/B-IV and the 1973 ANS Draft Standard in current use are included. Gas content, important to decay-heat experiments, and absorption effects on decay power are reviewed. 37 figures, 8 tables.

The quality assurance program for environmental monitoring that has been developed at the Lawrence Livermore Laboratory (LLL) consists of procedure documentation, replicate field-sample analysis, and participation in intercomparison measurements. Sampling, analytical, data processing, and record keeping procedures are described. A replicate-sample collection schedule has been established for all media sampled at LLL. At present, blind-spiked samples are not utilized. Flow rates of air samplers are verified at monthly intervals using a portable, field calibration unit. Intercomparison measurements are made on samples supplied by the Quality Assurance Branch of the Environmental Protection Agency-Environmental Monitoring and Support Laboratory and the Department of Energy-Environmental Measurements Laboratory. Replicate sampling currently accounts for approximately 8% of both the total samples collected and the analyses performed. Including standard, in-house, quality-control checks, and the intercomparison measurements, it is estimated that during 1978 quality assurance will represent about 15% of the total environmental-monitoring effort at LLL.