The Idaho Chemical Processing Plant for several years has been studying various pulsing systems, used in extraction columns for processing irradiated nucIear fuel elements, in an effort to eliminate the mechanical difficuittes in present pulsing systems. An air puising system has been demonstrated, and a discussion is given of experimental work, pulser design, and plant operational experience with this system. It is concluded, from work completed thus far that air puising of extraction columns is a considerable improvement over other systems. (auth)

The effect of transverse displacements of combined function magnets is investigated where the disperion in not matched due to roll. This dispersion function is perturbed by displacement of combined function magnets either singly or coherently. In the latter case the effect of a systematic (or DC) offset of magnets is examined. This type of error can occur due to systematics in the placement or the readout of Beam Position Monitors or equivalently by correcting the orbit of a beam of the wrong momentum with respect to the Arc magnet excitation. 5 refs., 18 figs.

We propose to study the utilization of high-temperature (approximately 2000-2500K) process heat from fusion reactors for large-scale chemical process applications. Of particular interest is the decomposition reaction, CO/sub 2/ ..-->.. CO + /sup 1///sub 2/O/sub 2/, which at 2500K should yield approximately 60 percent conversion to CO if O/sub 2/ is partially removed through an oxide membrane. Hydrogen can be derived from CO at lower temperatures by reacting CO with steam, and C can also be derived from CO by a disproportionation into C and CO/sub 2/ at approximately 1000K. These chemicals, CO, H/sub 2/, and C, form the basis for a multitude of non-electrical energy applications in the areas of transportation, industrial processes, and residential and commercial uses. In addition to the CO/sub 2/ decomposition process, we propose to explore a variety of ideas and evaluate them for scientific and economic merit. A follow-on research and development program will be proposed if the ideas prove promising.

None

GCRA has approached the initial review of the subject plans from the vantage of Utility/User interests in an HTGR-SC/C Lead Project as characterized in the HTGR-SC/C Lead Project Plan. At their current stage of development, the plans are considered to represent the early views of General Atomic Company, acting as a potential NSSS vendor, on the effort necessary to design and license an HTGR-SC/C plant. As such, these plans embody GA's perception of the level of technical development and demonstration needed to support the cost and risk sharing assumptions in the Lead Project Plan. These plans and the plant design which they address will be subjected to a more formal review by other vendor and Utility interests in the course of establishing the Project Decision Package scheduled for June 1982. The culmination of these review activities will be the adoption of this information by all participants as the HTGR-SC/C Program Baseline.

TEBASCO is a Tandem mirror Equilibrium and BAllooning Stability COde. TEBASCO allows you to compute tandem-mirror MHD equilibria and to analyze both the flute-averaged and ballooning-mode stability of these equilibria. This stability analysis is directed toward the computation of marginal stability boundaries. Users of TEBASCO require a binary output file from the EFFI code which describes the vacuum magnetic field. In making this EFFI file the user will have defined a system of units for lengths (e.g., meters) and magnetic field (e.g., Tesla). In TEBASCO, all magnetic field strengths are normalized to the vacuum center-cell midplane value, and times are defined in units of the time for an Alfven wave in this field to transit one EFFI unit of length.

A particularly simple problem exhibiting stochasticity is the motion of a charged particle in a uniform magnetic field and a single wave. Detailed studies of this wave-particle interaction show the following features. An electrostatic wave propagating obliquely to the magnetic field causes stochastic motion if the wave amplitude exceeds a certain threshold. The overlap of cyclotron resonances then destroys a constant of the motion, allowing strong particle acceleration. A wave of large enough amplitude would thus suffer severe damping and lead to rapid heating of a particle distribution. The stochastic motion resembles a diffusion process even though the wave spectrum contains only a single wave. The motion of ions in a nonuniform magnetic field and a single electrostatic wave is treated in our study of a possible saturation mechanism of the dissipative trapped-ion instability in a tokamak. A theory involving the overlap of bounce resonances predicts the main features found in the numerical integration of the equations of motion. Ions in a layer near the trapped-circulating boundary move stochastically. This motion leads to nonlinear stabilization mechanisms which are described qualitatively.

Plans are to close Tank 17, a type IV waste tank in the F-area Tank Farm, by filling it with pumpable backfills. Most of the waste was removed from the tank in the late 1980s, and the remainder of the waste was removed in a short spray washing campaign that began on 11 April 1997. More details on the planned closure can be found in the Closure Plan for the High-Level Waste (HLW) Tanks and the specific closure module for Tank 17. To show that closure of the tank is environmentally sound, a performance evaluation has been performed for Tank 17. The performance evaluation projected the concentration of contaminants at various locations and times after closure. This report documents the basis for the inventories of contaminants that were used in the Tank 17 performance evaluation.

A 6-cell 805 MHz superconducting cavity for acceleration in the velocity range of about 0.4 to 0.53 times the speed of light was designed. After single-cell prototyping, three 6-cell niobium cavities were fabricated. In vertical RF tests of the 6-cell cavities, the measured quality factors (Q{sub 0}) were between 7 {center_dot} 10{sup 9} and 1.4 {center_dot} 10{sup 10} at the design field (accelerating gradient of 8 to 10 MV/m). A rectangular cryomodule was designed to house 4 cavities per cryomodule. The 4-cavity cryomodule could be used for acceleration of ions in a linear accelerator, with focusing elements between the cryomodules. A prototype cryomodule was fabricated to test 2 cavities under realistic operating conditions. Two of the 6-cell cavities were equipped with helium tanks, tuners, and input coupler and installed into the cryomodule. The prototype cryomodule was used to verify alignment, electromagnetic performance, frequency tuning, cryogenic performance, low-level RF control, and control of microphonics.

For the fourth quarter ARM metric we will make use of new liquid water data that has become available, and called the 'Microbase' value added product (referred to as OBS, within the text) at three sites: the North Slope of Alaska (NSA), Tropical West Pacific (TWP) and the Southern Great Plains (SGP) and compare these observations to model forecast data. Two time periods will be analyzed March 2000 for the SGP and October 2004 for both TWP and NSA. The Microbase data have been averaged to 35 pressure levels (e.g., from 1000hPa to 100hPa at 25hPa increments) and time averaged to 3hourly data for direct comparison to our model output.

Project Abstract for “Steam Cycle Washer for Unbleached Pulp” When completed, the patented SC Washer will provide an innovative, energy efficient demonstration project to wash unbleached pulp using a pressure vessel charged with steam. The Port Townsend Paper Corporation’s pulp mill in Port Townsend, WA was initially selected as the host site for conducting the demonstration of the SCW. Due to 2006 and 2007 delays in the project caused by issues with 21st Century Pulp & Paper, the developer of the SCW, and the 2007 bankruptcy proceedings and subsequent restructuring at Port Townsend Paper, the mill can no longer serve as a host site. An alternate host site is now being sought to complete the commercial demonstration of the Steam Cycle Washer for Unbleached Pulp. Additionally, estimated costs to complete the project have more than doubled since the initial estimates for the project were completed in 2002. Additional grant funding from DOE was sought and in July, 2008 the additional DOE funds were procured under a new DOE award, DE-PS36-08GO98014 issued to INL. Once the new host site is secured the completion of the project will begin under the management of INL. Future progress reports and milestone tracking will be …

Increased nitrogen levels have been correlated with decreased ductility and elevated ductile-to-brittle transition temperature in pressure vessel steels [1]. However, the exact role played by nitrogen in the embrittlement of steels remains unclear. Miller and Burke have reported atom probe ion microscopy findings from neutron-irradiated low-alloy pressure vessel steel showing the presence of a 1 to 2 ruonolayer thick film of Mo, N, and C at prior austenitic grain boundaries (GB's) [2], suggesting a role for nitrogen as an intergranular embrittler. It is of interest for the development of mitigation strategies whether nitrogen must combine with other impurities to form nitride precipitates in order to exert an embrittling effect. Briant et al [1] have associated the embrittling effect of N in steels exclusively with intergranular nitride formation. This association suggests that high nitrogen levels may be acceptable if nitride precipitation at grain boundaries is suppressed. To address whether precipitate formation is indeed essential to the N embrittlement process in pressure vessel steel, a computational study was undertaken to ascertain whether the presence of interstitial nitrogen alone could embrittle an Fe GB. If so, nitrogen in any form must be kept completely away from the grain boundaries, if not out of …

A preliminary technoeconomic assessment has been made of several options for the application of catalytic hydrothermal gasification (wet gasification) to ethanol processing residues.

Radiological characterization, decommissioning and demolition of the 132-DR-1 site, 1608-DR Effluent Pumping Station was performed in 1987. The current site conditions achieve the remedial action objectives and the corresponding remedial action goals established in the Remaining Sites ROD. Residual concentrations support future land uses that can be represented by a rural-residential scenario and pose no threat to groundwater or the Columbia River based on RESRAD modeling.

The geothermal resources of California's Imperial Valley have the potential for the production of an estimated 3000 to 5000 MW/yr of electricity for 30 yr, provided that adeuqate cooling water is available for power plants. There are five possible sources of cooling water: irrigation water, waste waters from agriculture, steam condensate, ground water, and water from the Salton Sea. Technical, environmental, and regulatory constraints, however, could limit the availability of the water supplies. Of particular concern are the constraints that could be imposed if different water policies were implemented. To study how future policies could affect geothermal development, six combinations of various policies were defined to represent potential regulatory controls. A range of future water balances in the valley was also specified. The water balances plus the six policy combinations were used to determine whether deficits of cooling water would eventually constrain low, medium, or high levels of geothermal energy production. A companion analysis of changes in the elevation and salinity of the Salton Sea resulting from the use of agricultural waters for cooling was also made.

Metered energy consumption data have been collected on existing commercial buildings to help establish the proposed Building Energy Performance Standards (BEPS). The search has identified 84 buildings whose metered energy consumption is equal to or less than that proposed for their BEPS budgets and another 7 buildings whose metered consumption is less than 20% above their BEPS budgets. The methodology used to identify the buildings and to collect their metered energy consumption data are described. The data are analyzed and summarized and conclusions are drawn.

The NATO-ASI on Diamond and Diamond-Like Films and Coatings'' was an opportunity for us to learn the latest research results from ongoing programs in the leading laboratories of the world and relate them to our work. Specific examples are given in the comprehensive report which follows. The meeting format provided an ideal environment to meet and interact with our international counterparts. It is clear that our studies are well regarded, and that we have established an excellent reputation in a short time. New opportunities for collaboration were identified. A panel discussion at the end of the meeting addressed the needs and opportunities in the synthesis of CVD diamond. The key scientific needs are those related to modeling the nucleation and growth processes and to elucidation of the critical roles of atomic hydrogen and the mechanisms of carbon addition to the growing surfaces. The development and more extensive use of in situ diagnostics for both surface and gas phases are important to solving these issues. The more immediate practical questions concern the identification of the growth-rate-limiting steps, the relation of growth parameters to the resulting film structure, and the dependence of properties on structure.

Three ships were examined, the ED RYERSON, the ST. CLAIR, and the STEWART CORT to determine if retro-fitting these ships with a 3000 sq ft soft sail cat rig is economically feasible. By using existing weather data taken from recorded observations on Lake Michigan and Lake Superior and known performance characteristics of both the sailplan and hull, a computer program was written to model the problem. Three cases for each ship were estimated. The first was the average fuel savings, second was an optimistic estimate of fuel savings, and the third was a pessimistic estimate of fuel savings. Several considerations had to be taken into account that had serious consequences for the economic viability of the idea. One was the fact that all of the aforementioned ships have self unloading equipment that require about 80% of the deck space to be clear. This limited the choice of sailplans to one per ship. Another consideration is that due to bridge clearance problems an air draft of less than 125' was required. These two factors limited the size and efficiency of the sail plan. The third consideration is that due to the very tight shipping channels on the Great Lakes, there is …

A FORTRAN code to evaluate binary reaction rates (sigmav) for a plasma to a specified accuracy is described. Distribution functions permitted are (1) two Maxwellian species at different temperatures, (2) beam-Maxwellian, (3) cold gas with Maxwellian, and (4) beam-plasma with mirror distribution of the form f(v) varies as f(v) M (cos theta). Several functional forms are permitted for f(v) and M(cos theta). Cross-section subroutines for a number of interactions involving hydrogen, helium, and electrons are included, as is a routine allowing input of numerical data. The code is written as a subroutine to allow ready incorporation into larger plasma codes.

A laser flash photolysis kinetic study of 2,2{prime}-bipyridine bidentate chelating ligands with one claw in the first coordination sphere of a molybdenum carbonyl complex has been completed at pressures up to 150 MPa. The reaction mechanism for thermal ring closure is found from activation volumes to change from associative interchange to dissociative interchange as substituents on the 2,2{prime}-bipyridine ligands become bulkier. In a similar study of more rigid, substituted phenanthroline bidentate ligands it was found that substituent bulkiness had little effect on the thermal ring closure mechanism. Stability constants for lithium ion complexes with crown ethers in a room temperature molten salt, fluorescence quantum yields for cresyl violet and several other dyes in solution, and the oxidation of alcohols by OsO{sub 4} have also been investigated.

This report provides the qualitative risk assessment for the 100-HR-3 operable unit on the Hanford Reservation. 100-HR-3 is a ground water unit. The purpose of the QRA at the 100-HR-3 operable unit is to focus on a predefined set of human and environmental exposure scenarios in order to provides sufficient information that will assist the Tri-Party signatories (Washington State Department of Ecology, EPA and US DOE) in making defensible decisions on the necessity of Interim Remedial Measures. Frequent- and occasional-use exposure scenarios are evaluated in the human health risk assessment to provide bounding estimates of risk. The ecological risk assessment consists of an evaluation of the risks to riparian and aquatic receptors which live in or near the Columbia River.

Production Test-080 authorized the conduct of certain physics tests during the deactivation of D Reactor. The primary objective of the test was to measure certain physics parameters which could be used to check current computational models. In this report are presented a brief chronology of the tests and a tabulation of the experimental data. In general, data processing has not progressed beyond simple reduction of the raw experimental data to a form more easily used in future analytical comparisons and evaluations. Tests included a test for excess reactivity of the reactor by calibration of a control rod, a test for evaluation of experimental technique for measuring the effect of safety systems, tests for data on space-dependent reactor transients, coupling coefficients, etc.

Available pressure data on the B and D downcomers and approach piping is tabulated herein. All readings were taken with an air bubbler system; readings given in psi were taken on a Bourdon-type pressure-vacuum gauge, readings given in inches of water were read on an oil-filled manometer. In each case, fluctuations occurred and the mean value was estimated by eye. Data are presented as a function of flow rate and temperature.

The Hanford Seismic Monitoring Network consists of two designs of equipment and sites: seismometer sites and strong motion accelerometer (SMA) sites. Seismometer sites are designed to locate earthquakes on and near the Hanford Site and determine their magnitude and hypocenter location. The US Department of Energy (DOE) Order 5480.28, Natural Phenomena Hazards (DOE 1993) requires that facilities or sites that have structures or components in Performance Category 2 with hazardous material, and all Performance Category 3 and 4 facilities shall have instrumentation or other means to detect and record the occurrence and severity of seismic events. In order to comply with DOE Order 5480.28, the Hanford Seismic Monitoring Network seismometer sites needed to be complemented with strong motion accelerometers to record the ground motion at specific sites. The combined seismometer sites and strong motion accelerometer sites provide the Hanford Site with earthquake information to comply with DOE Order 5480.28. The data from these instruments will be used by the PHMC staff to assess the damage to facilities following a significant earthquake.