Cratering is a subject that has been studied by many investigators for many years for many purposes. These purposes range from experimental studies of physical properties to large scale excavations using explosive charges of kiloton size. In the past ten years considerable effort has been devoted to cratering experiments for the purposes of determining the effects of cratering by nuclear explosions, with recent accent on Plowshare applications. From the large amount of data available for craters in alluvian has been possible to establish very reliable relationships between charge size, depth of bursty crater radii, and crater depths. In addition it has been possible to construct a preliminary theory of the mechanics of explosive crater formation. The available experimental data for nuclear and high explosive craters are reviewed, with particular emphasis on the data for desert alluvium, and the pertinent relationships are derived. A theory of the important cratering mechanisms, which has been evolved on the basis of these data and data from other sources, is outlined. (auth)

As the first part of a study to evaluate the economics of the various steps leading to and including the permanent disposal of high-activity liquid and solid radioactive waste, costs of interim liquid storage of acid and alkaline Purex and Thorex wastes were estimated for storage times of 0.5 to 30 years. A 6- ton/day plant was assumed, processing 1500 tons/year of uranium converter fuel at a burnup of 10,000 Mwd/ton and 270 tons/year of thorium converter fuel at a burnup of 20,000 Mwd/ton. Tanks of Savannah River design were assumed, with stainless steel construction for acid wastes and mild steel construction for neutralized wastes. The operating cycle of each tank was assumed to consist of equal filling and emptying periods plus a full (or dead) period. With interim storage time defined as filling time plus full time, tank costs were minimum when full time was 40 to 70% of the interim storage time, using present worth considerations. For waste storage times of 0.5 to 30 years, costs ranged from 2.2 x 10/sup -3/ to 9.5 x 10/sup -3/ mill/kwh/sub e/ for acid wastes and from 1.7 x 10/sup -3/ to 5.1 x 10/sup -3/ mill/kwh/sub e/ for neutralized wastes. …

The Schroedinger Integral Equation is derived for an N-body system, and solutions for required Green's functions are obtained. The initial method of numerical solution has yielded the correct ground states and lower excited states of He (test case) and dt..mu... Steps are being taken to improve the numerical accuracy.

In this paper, we solve different theoretical problems associated with the calculation of the kernel occurring in the Hill-Wheeler integral equations within the framework of generator coordinate method. In particular, we extend the Wick's theorem to nonorthogonal Bogoliubov states. Expressions for the overlap between Bogoliubov states and for the generalized density matrix are also derived. These expressions are valid even when using an incomplete basis, as in the case of actual calculations. Finally, the Hill-Wheeler formalism is developed for a finite range interaction and the Skyrme force, and evaluated for the latter. 20 refs., 1 fig., 4 tabs.

This summer I had the privilege of working at Lawrence Livermore National Laboratory under the Nonproliferation, Homeland and International Security Directorate in the Chemical and Biological Countermeasures Division. I worked exclusively on the Viral Identification and Characterization Initiative (VICI) project focusing on the development of multiplexed polymerase chain reaction (PCR) assays. The goal of VICI is to combine several disciplines such as molecular biology, microfluidics, and bioinformatics in order to detect viruses and identify them in order to effectively and quickly counter infectious disease, natural or engineered. The difficulty in such a countermeasure is that little is known about viral diversity due to the ever changing nature of these organisms. In response, VICI is developing a new microfluidic bioanalytical platform to detect known and unknown viruses by analyzing every virus in a sample by isolating them into picoliter sized droplets on a microchip and individually analyzing them. The sample will be injected into a channel of oil to form droplets that will contain viral nucleic acids that will be amplified using PCR. The multiplexed PCR assay will produce a series of amplicons for a particular virus genome that provides an identifying signature. A device will then detect whether or not …

Many different materials are used in the National Ignition Facility, NIF, located at Lawrence Livermore National Laboratory, LLNL. Some of these are exposed to significant doses of ionizing radiation. Two elastomers are of special interest because they are used in sealing applications with long expected lifetimes. These are LPU4, a polyurethane formulated at LLNL, and Dow Corning DC93-500, a silicone RTV elastomer. In 2004 a program to determine the impact of ionizing radiation on the stress relaxation and compression set characteristics of these two elastomers was undertaken. Since the materials are used in continuous compression and must reliably seal, the primary test utilized was a stress relaxation test. This test provides insight into the ability of a seal to remain functional in a static seal. The test determines how much residual force remains after a certain period of time under compression. The temperature and absorbed radiation dose can dramatically impact this property. In this study the only independent environmental variable studied is the effect of radiation at ambient temperatures. Two levels of radiation exposure were studied, 1 MRad, and 10 MRad. One of the independent test parameters is the compression deflection during storage and in this test the value used …

This procedure provides instructions forassembling the following CH packaging payload: Drum payload assembly Standard Waste Box (SWB) assembly Ten-Drum Overpack (TDOP)

Corrosion rates using supernatant samples retrieved from near the top of the liquid layer were determined for the tanks. Corrosion rates using settled solids (saltcake) were determined. The supernatant samples were tested as received without argon sparging. The settled solid sample segments were extruded under anaerobic condition and kept under a sweep of humidified argon gas during 'the electrochemical corrosion testing. The class of steel used to construct the tank in question was used, and test coupons were allowed to equilibrate for a minimum of 18 hours before a Tafel scan was initiated. The coupons were scanned from -250 mV to +250 mV from the rest or open circuit potential. The corrosion rate is reported along with the corrosion current measurement, open circuit potential, and a chi-square statistic generated by the instrument controlling and analysis algorithm.

In the near future, the United States will be facing constraints on energy availability due to the heightened demand for both energy and water, especially during droughts and summers. Increasing stress on the inextricably linked resource availability of both water and energy can be mitigated with integrated planning. Exchanging data is an important component to current and future mitigation approaches within the Energy-Water Nexus. We describe the types of relationships that are formed in the United States EWN, and address the data sharing obstacles within. Approaches to removing the obstacles of data sharing are presented, based on case studies.

A DYNA3D model of the DT-20 shipping container was constructed. Impact onto a rigid steel surface at a velocity of 44 ft/sec (30 foot gravity drop) was studied. The orientation of most interest was a side-drop, but end and corner drops were also studied briefly. The assembly for the baseline side impact contained a 150 lb. payload. During this drop, the outer drum sustains plastic strains of up to 0.15, with most the deformation near the rim. The plywood/Celotex packing is crushed about 3 inches. The inner sealed can sees significant stresses, but barely reaches the onset of yielding in some local areas. Based on hand calculations, the bolts joining the can halves could see stresses near 50 ksi. It is felt that overall, the container should survive this drop. However, detailed modeling of the rim closure and the center bolted joint was not possible due to time constraints. Furthermore, better material models and properties are needed for the Celotex, plywood, and honeycomb in particular. 39 figs., 1 tab.

RINGBEARER is a particle simulation code for modelling an electron beam propagating in a gas characterized by a space and time varying conductivity generated by the beam. The code has two spatial dimensions, the beam is assumed to be axially symmetric. Equations for the beam driven pinch field, the plasma density, and the conductivity are given along with the appropriate initial conditions and boundary conditions. The equations governing particle energy loss, transverse motion, and scattering, in the beam generated pinch field are presented. The analytic models used in the code are presented with either references or derivations.

None

The Accelerator Test Facility (ATF) at Brookhaven National Laboratory is a linac-laser complex for research into laser acceleration and for the generation of coherent radiation from electron beams. In order to achieve the design 50 MeV output emittance (..gamma..sigma/sub x/sigma/sub x/') of less than 3 /times/ 10/sup /minus/5/ m rad a high brightness electron gun is required. This paper describes computations and measurements made on a full scale brass model of a 1-1/2 cell, ..pi..-mode, resonant, disc loaded, radiofrequency gun structure which has been designed for this purpose. 7 refs., 9 figs., 6 tabs.

On December 19, 1979, a spill of SRC liquid occurred during transfer of the liquid from a storage tank to sample drums. Approximately 2,300 gallons of fluid flowed into the floor of the tank farm and infiltrated into the porous and permeable gravels at the site. Because of concern for the possible impact of the SRC fluid on the quality of ground water, surface water, and water supply sources at and near the site, GMRC commissioned Radian to evaluate the problem and recommend specific measures to mitigate any known or anticipated impacts. This report presents the results of Radian's investigations. Although ground-water contamination apparently has occurred as a result of the December 19 spill, the contamination plume is localized to the vicinity of the SRC plant and Lake Sequalitchew. A contamination plume apparently is presently moving toward Lake Sequalitchew, but the two pump wells included in the Remedial Measures Plan will arrest this movement. These wells will be pumped until phenol concentrations in the groundwater fall to acceptable levels. The source of contamination at the spill is being cut off by excavation of the contaminated soil and sealing of the floor of the tank farm. No public water supplies are …

While developing dry sorbent duct injection flue gas desulfurization processes may offer significant improvement in capital cost and process simplicity compared to wet scrubbing systems, the economics of this technology can be improved significantly by an improvement in sorbent utilization. While a general understanding of the mechanism by which the sorbents operate is known, a much more detailed knowledge of reaction rate-controlling phenomena, the role of inherent reactivity, and mass transfer effects and their interaction in needed. Objectives of this project are threefold: 1. Mass transfer investigation--determine the controlling physical and chemical processes that limit sorbent utilization. In particular, determine whether mass transfer is a controlling factor in in-duct flue gas desulfurization and establish the relative contributions of gas- and liquid-phase mass transfer and inherent sorbent reactivity. 2. Field test support--evaluate various sorbents, operating conditions and process schemes to support large-scale field testings at Meredosia and Beverly. 3. Mass transfer enhancement--examine various techniques that will enable sorbent utilization rates of at least 75 percent to be achieved. Sorbents investigated were Ca(OH){sub 2}, Mississippi hydrate and Mississippi slaked lime. Epsom Salt was investigated as an additive. Agglomeration of Ca(OH){sub 2} solids was also investigated. 3 refs., 92 figs., 23 tabs.

The possibility of using Landau damping to reduce the growth of the beam size due to transverse wake fields has been known for some time. Recently K. Bane has calculated the effects of Landau damping for the SLC. The energy spread is then slowly removed so that at the end of the linac it has returned to the SLC specification of less than +0.5%. The purpose of the energy spread is to reduce the resonant driving of the tail of the bunch by the head. In this note the expected energy spreads within the beam are tabulated at various positions along the linac for use by those people designing momentum dependent equipment and for those interested in Landau damping.

The pile physics group reports on reactivity power coefficients from the production test No. 105-248-P, the water leak in B pile, graphite properties, xenon equations from the B pile shutdown of March 1946, and reactivity balance. The experimental physics group headed by J.M. West reports on graphite testing, the P-11 project, and shielding. The experimental physics group headed by E.B. Montgomery reports on diffusion length measurements in the DR and H piles. (GHH)

Irradiation of the initial test in this program involving ten tubes of alternately charged nickel-plated C-64 alloy clad test elements and X-80001 alloy control elements has been successfully completed. The test indicated that the nickel-plate spalling problem has been resolved, as no significant spalling or flaking was observed during the post-irradiation examination. The second test in this program will be to verify that the nickel-plate integrity problem has been solved by irradiating a pilot loading (up to 100 charges) of fuel elements which have been nickel-plated on a production basis.

With an increased water plant capacity, the installation of zirconium process tubes and the use of self-supported fuel elements, the power level capability of the K Reactors exceeds the current administrative limit. Exploitation of this capability, if approved, will almost certainly bring about higher graphite temperatures. Because of a continuing concern for graphite oxidation, and because the rate of oxidation increases with increasing graphite temperature, upgrading of the existing K-Reactor gas system through project actin has been proposed. This document presents the technical basis for such project action.

The July, 1958 monthly report for the Chemical Processing Department of the Hanford Atomic Products Operation includes information regarding research and engineering efforts with respect to the Purex and Redox process technology. Also discussed is the production operation, finished product operation, power and general maintenance, financial operation, engineering and research operations, and employee operation. (MB)

In order to provide advance direction for 333 Building equipment development work, a survey of potential areas of significant savings through equipment improvement has been made. The purpose of this report is only to indicate areas for investigation, not to define a program. Equipment is adequate to maintain operating continuity and provide for safe operation of the building. Special attention should be given to ``one-of-a-kind`` pieces of equipment. These include the press, cutoff saw, beta heat treat facility and autoradiograph film developer. Manpower savings will result principally from refinement of each operation. There are no really outstanding areas for improvement. The greatest potential for savings is in material costs. These are illustrated in Tables I&IV. Maintenance costs provide for possible significant reductions at braze, vacu-blast, nondestructive test, autoclaves, and chemical processing equipment.

Space charge neutralization of ion beams results from plasma generated by the beam. The two dimensional flow of plasma to walls surrounding a beam is analyzed to provide spatial distributions. Negative ion beams receive particular attention; the results are applied to electron control in beams subject to post-acceleration.

Forty three of the High Level Waste (HLW) tanks at the Savannah River Site (SRS) have internal structures that hinder removal of the last approximately five thousand gallons of waste sludge solely by mechanical means. Chemical cleaning can be utilized to dissolve the sludge heel with oxalic acid (OA) and pump the material to a separate waste tank in preparation for final disposition. This dissolved sludge material is pH adjusted downstream of the dissolution process, precipitating the sludge components along with sodium oxalate solids. The large quantities of sodium oxalate and other metal oxalates formed impact downstream processes by requiring additional washing during sludge batch preparation and increase the amount of material that must be processed in the tank farm evaporator systems and the Saltstone Processing Facility. Enhanced Chemical Cleaning (ECC) was identified as a potential method for greatly reducing the impact of oxalate additions to the SRS Tank Farms without adding additional components to the waste that would extend processing or increase waste form volumes. In support of Savannah River Site (SRS) tank closure efforts, the Savannah River National Laboratory (SRNL) conducted Real Waste Testing (RWT) to evaluate an alternative to the baseline 8 wt. % OA chemical cleaning …

None