The effects of seismic vibrations on the dynamic behavior of a composite system were analyzed. The equations of motion were derived and soIved with special emphasis on determining the resulting stresses. The method of analysis thus developed was applied to the composite structure consisting of the core, pressure vessel, and supporting skirt of the Experimental Gas-Cooled Reactor (EGCR). A system with three degrees of freedom was considered in order to determine the effects of an earthquake of the maximum intensity expected in the area surrounding Oak Ridge, Tennessee. The system of equations of motion was solved both numerically and analytically, and the resonant frequencies were determined. The seismic effect was shown to be small when the frequency of the seismic disturbance coincided with a natural frequency of the system. In particular, the shear stresses in the graphite core were shown to be negligible. (auth)

The results of our assessment of the processing methods and costs for the recovery of cesium, techneium, rhodium, and palladium from aged waste supernates are presented. Guidelines for the assessment of costs are given. Cesium can be readily absorbed from alkaline waste supernates without prior treatment using Linde AW-500, a synthetic zolite. Technetium, present in the supernate as the pertechnetate anion, together with rhodium and palladium, probably present as anionic nitrite complexes, can be absorbed from untreated waste supernates using Dowex 1-X4 or similar anion resins. Although the behavior of cesium and technetium is reasonably well understood, the behavior of the anionic complex that accounts for the presence of rhodium and palladium in this strongly alkaline solution is not well understood. Further work is required before a process can be outlined for the clean separation of rhodium and palladium from the technetium-rhodium-palladium crude fraction sorbed on the anion resin. An assessment of capital and operating costs for the recovery of cesium only, technetium only, or both cesium and technetium are tabulated. No costs are shown for rhodium and palladium, since the technology for their separation is not sufficiently advanced. However, the incremental cost for their separation from technetium is expected …

A new attempt is made to study the mechanisms of particle invasions into porous media. The following subjects are described: A critical survey of the literature indicating that the mechanism of particle invasions is not known in sufficient detail. The pros and cons of existing particle measuring devices are briefly described. Results from a new laboratory study on particle characterizations are given. The results of the laboratory studies on the flow of particle suspensions through porous media (up to 200 md) are discussed. The effects of flow rate and particle concentrations on the amount of damage (i.e., permeability impairment) and depth of penetration (from core inlet towards outlet) are particularly emphasized. Filter methods (e.g., using millipore filter) cannot be used to determine particle invasions into porous medium. Any predictions of the injection problems based on millipore (or any other filter) measurements are useless and should be discarded.

A state-of-the-art review of solar process heat is given; near term prospects are discussed; and the federal solar industrial process heat program is reviewed. Existing solar industrial process heat projects are tabulated. (WHK)

Our goal was to design and monitor a hybrid solar system/ground loop which automatically assists the standard, thermostatically controlled home heating/cooling system. The input from the homeowner was limited to normal thermostat operations. During the course of the project it was determined that to effectively gather data and control the various component interactions, a micro-computer based control system would also allow the HVAC system to be optimized by simple changes to software. This flexibility in an untested concept helped us to achieve optimum system performance. Control ranged from direct solar heating and direct ground loop cooling modes, to assistance of the heat pump by both solar space and ground loop. Sensors were strategically placed to provide data on response of the Trombe wall (surface, 4 in. deep, 8 in. deep), and the ground loop (inlet, 3/4 length, outlet). Micro-computer hardware and computer programs were developed to make cost effective decisions between the various modes of operation. Although recent advances in micro-computer hardware make similar control systems more readily achievable utilizing standard components, attention to the decision making criteria will always be required.

We present a sample microstate for a black ring in four and five dimensional language. The microstate consists of a black string microstate with an additional D6-brane. We show that with an appropriate choice of parameters the piece involving the black string microstate falls down a long AdS throat, whose M-theory lift is AdS_3 x S2. We wrap a spinning dipole M2-brane on the S2 in the probe approximation. In IIA, this corresponds to a dielectric D2-brane carrying only D0-charge. We conjecture this is the firstapproximation to a cloud of D0-branes blowing up due to their non-abelian degrees of freedom and the Myers effect.

In hierarchical structure formation, merging of galaxies is frequent and known to dramatically affect their properties. To comprehend these interactions high-resolution simulations are indispensable because of the nonlinear coupling between pc and Mpc scales. To this end, we present the first adaptive mesh refinement (AMR) simulation of two merging, low mass, initially gas-rich galaxies (1.8 x 10{sup 10} M{sub {circle_dot}} each), including star formation and feedback. With galaxies resolved by {approx} 2 x 10{sup 7} total computational elements, we achieve unprecedented resolution of the multiphase interstellar medium, finding a widespread starburst in the merging galaxies via shock-induced star formation. The high dynamic range of AMR also allows us to follow the interplay between the galaxies and their embedding medium depicting how galactic outflows and a hot metal-rich halo form. These results demonstrate that AMR provides a powerful tool in understanding interacting galaxies.

To grow, develop, adapt, and reproduce, plants have evolved mechanisms to regulate the uptake, translocation and sorting of calcium ions into different cells and subcellular compartments. Yet how plants accomplish this remarkable feat is still poorly understood. The spatial and temporal changes in intracellular [Ca2+] during growth and during responses to hormonal and environmental stimuli indicate that Ca2+ influx and efflux transporters are diverse and tightly regulated in plants. The specific goals were to determine the biological roles of multiple Ca pumps (ECAs) in the model plant Arabidopsis thaliana. We had pioneered the use of K616 yeast strain to functionally express plant Ca pumps, and demonstrated two distinct types of Ca pumps in plants (Sze et al., 2000. Annu Rev Plant Biol. 51,433). ACA2 represented one type that was auto-inhibited by the N-terminal region and stimulated by calmodulin. ECA1 represented another type that was not sensitive to calmodulin and phylogenetically distinct from ACAs. The goal to determine the biological roles of multiple ECA-type Ca pumps in Arabidopsis has been accomplished. Although we demonstrated ECA1 was a Ca pump by functional expression in yeast, the in vivo roles of ECAs was unclear. A few highlights are described. ECA1 and/or ECA4 are …

This study predicts new hybrid lighting applications for LEDs. In hybrid lighting, LEDs provide a low-energy 'standby' light level while another, more powerful, efficient light source provides light for occupied periods. Lighting controls will allow the two light sources to work together through an appropriate control strategy, typically motion-sensing. There are no technical barriers preventing the use of low through high CRI LEDs for standby lighting in many interior and exterior applications today. The total luminous efficacy of LED systems could be raised by increasing the electrical efficiency of LED drivers to the maximum practically achievable level (94%). This would increase system luminous efficacy by 20-25%. The expected market volumes for many types of LEDs should justify the evolution of new LED drivers that use highly efficient ICs and reduce parts count by means of ASICs. Reducing their electronics parts count by offloading discrete components onto integrated circuits (IC) will allow manufacturers to reduce the cost of LED driver electronics. LED luminaire manufacturers will increasingly integrate the LED driver and thermal management directly in the LED fixture. LED luminaires of the future will likely have no need for separable lamp and ballast because the equipment life of all the LED …

By analysing the pulse to pulse intensity fluctuations ofthe radiation emitted by a charge particle in the incoherent part of thespectrum, it is possible to extract information about the spatialdistribution of the beam. At the Advanced Light Source (ALS) of theLawrence Berkeley National Laboratory, we have developed and tested asimple scheme based on this principle that allows for the absolutemeasurement of the bunch length. A description of the method and theexperimental results are presented.

The International Linear Collider will give physicists a new cosmic doorway to explore energy regimes beyond the reach of today's accelerators. A proposed electron-positron collider, the ILC will complement the Large Hadron Collider, a proton-proton collider at the European Center for Nuclear Research (CERN) in Geneva, Switzerland, together unlocking some of the deepest mysteries in the universe. With LHC discoveries pointing the way, the ILC -- a true precision machine -- will provide the missing pieces of the puzzle. Consisting of two linear accelerators that face each other, the ILC will hurl some 10 billion electrons and their anti-particles, positrons, toward each other at nearly the speed of light. Superconducting accelerator cavities operating at temperatures near absolute zero give the particles more and more energy until they smash in a blazing crossfire at the centre of the machine. Stretching approximately 35 kilometres in length, the beams collide 14,000 times every second at extremely high energies -- 500 billion-electron-volts (GeV). Each spectacular collision creates an array of new particles that could answer some of the most fundamental questions of all time. The current baseline design allows for an upgrade to a 50-kilometre, 1 trillion-electron-volt (TeV) machine during the second stage of …

We are developing ALE3D models to describe the thermal, chemical and mechanical behavior during the heating, ignition and explosive phases of various cookoff phenomena. The candidate models and numerical strategies are being evaluated using benchmark cookoff experiments. ALE3D is a three-dimensional computer code capable of solving the model equations in a coupled fashion through all the phases of the cookoff in a single calculation. For the cookoff experiments, we are interested in representing behavior on widely varying timescales. We have used an implicit hydrodynamics option during the heating phase and an explicit solution method during the explosive phase. To complicate the modeling problem, high heat fluxes cause rapid temperature increases in boundary layers and lead to the formation of gaps between energetic and structural materials and ignition on surfaces. The initially solid energetic and structural materials react to produce gases, which fill the gaps. These materials can also melt and flow. Since an implicit solution method is used, simple no-strength materials models can no longer be used for liquids and gases. In this paper, we discuss and demonstrate choices of materials models for solid/liquid/gas mixtures to be used in conjunction with the implicit solution method. In addition, results are given …

Streak cameras continue to be useful tools for studying phenomena on the picoseconds time scale. We have employed accelerator modeling tools to understand and possibly improve the time resolution of present and future streak cameras. This effort has resulted in an end-to-end model of the camera. This model has contributed to the recent measurement of 230 fsec (FWHM) resolution measured at 266 nm in the Advanced Light Source Streak Camera Laboratory. We describe results from this model that show agreement with the experiments. We also extrapolate the performance of this camera including several possible improvements.

Significant problems facing all experimental andcomputationalsciences arise from growing data size and complexity. Commonto allthese problems is the need to perform efficient data I/O ondiversecomputer architectures. In our scientific application, thelargestparallel particle simulations generate vast quantitiesofsix-dimensional data. Such a simulation run produces data foranaggregate data size up to several TB per run. Motived by the needtoaddress data I/O and access challenges, we have implemented H5Part,anopen source data I/O API that simplifies the use of the HierarchicalDataFormat v5 library (HDF5). HDF5 is an industry standard forhighperformance, cross-platform data storage and retrieval that runsonall contemporary architectures from large parallel supercomputerstolaptops. H5Part, which is oriented to the needs of the particlephysicsand cosmology communities, provides support for parallelstorage andretrieval of particles, structured and in the future unstructuredmeshes.In this paper, we describe recent work focusing on I/O supportforparticles and structured meshes and provide data showing performance onmodernsupercomputer architectures like the IBM POWER 5.

A detailed description is presented of the analysis of velocity-vs-time data taken with LLL's four-phototube VISAR system. Separate sections deal with a general analysis of on-axis rays when only one frequency of reflected laser light is present, a simplified analysis where two distinct frequencies are present and the rays are still on axis, and a discussion of the effects of off-axis rays. The description is given in such a manner that a VISAR user could employ the formulae in this report to directly analyze data. Unlike previous literature on the VISAR, this analysis does not assume that the mirrors are set at the best fringe contrast position.

New results are presented from analyses of several mesonic and baryonic states containing one or more strange quarks. The data are taken from a high statistics (4 events/nb) study of K p interactions at 11 GeV/c carried out in the LASS Spectrometer at SLAC. New information is reported on the underlying K* states and also evidence for selective coupling of K eta to the K*'s; on the strangeonium members of the axial vector nonets in the K anti K channel; and on evidence for an * state.

Progress is reported in a project in which the objectives are to evaluate benefits associated with control of the surface energetic properties of materials used in heat exchangers, and to identify preferred ranges of these surface conditions that minimize deposits of biological fouling known to deteriorate heat exchange efficiencies in seawater, brackish water and freshwater systems. The technical approach employed uses special diagnostic plates in novel flow cells where fluid flow conditions can be well-controlled, modifying the surface chemistry and surface energy of the plates with very thin coatings and examining the earliest events of biofouling caused by macromolecules and microbial organisms. Information is included on exposure experiments and results and heat exchange experiments.

Illustrations for the review on materials design and selection are presented. They include the mechanical engineering, the electrochemistry task, and information coordination. No text is presented. (MHR)

Volume 2 contains appendices as follows: coal supply curves, coal supply model modifications, coal mine financing data, legislative proposals for horizontal divestiture, overview of oil companies in coal industry (including their coal reserves) and the major sources of data and bibliography. (LTN)

The US Congress has set forth proposals which would prohibit oil companies from acquiring coal companies or other non-petroleum energy resources. Some proposals would require oil companies to divest themselves of any such resources that they already hold. The first legislation was introduced on this topic in the 94th Congress and alternative proposals are under serious consideration at the current time. We have analyzed some major variants of these legislative propsals with a study of likely economic behavior in the coal market as a result of horizontal divestiture. After a thorough study of the theoretical and empirical aspects of ownership-related behavior, two dichotomous sets of assumptions are possible. One set of assumptions is oriented towards synergism and growth maximization. The interpretation of these assumptions in the model is one of a lower rate of return for oil owned coal assets relative to non-oil owned assets. The second set of assumptions could broadly be termed monopoly assumptions. The depiction of these within the model framework is one of higher rates of return for oil owned coal relative to non-oil owned. These results are based on economic theory, engineering and econometric models, and analysis; all set in the general framework of comparative …

The contract has two phases, a design phase and a fabrication and installation phase. Presented is the work completed in Phase I, the design phase. The Sandia 17 m was used as the background machine from which design information was drawn. By concentrating the modifications on an existing design, emphasis was focused on component cost reduction rather than selection of optimal configuration or operating modes. The resulting design is a stretched version of the Sandia 17 m preserving the same rotor diameter and many other good features, but in the meantime lighter in weight, larger in capacity, and anticipated to be more cost effective.

This paper discusses the use of ORACLE at the Fusion Experiments Analysis Facility (FEAF) for the laser program of the Lawrence Livermore National Laboratory. The mission of this VAX based computing facility is to aid laser program scientists and engineers develop their understanding of inertial confinement fusion target behavior. We have incorporated the ORACLE DBMS as a major part of an integrated data management and analysis environment for accomplishing this task. We discuss our use of ORACLE through all phases of data processing from raw digital forms to final physics summary data. Applications include: an information management tool for maintaining large amounts of one- and two-dimensional data, a configuration management tool for experiment setup information, and a data analysis tool for maintaining calibration and sensor response data.

An attractive feature of the high energy (> GeV) heavy ion beam approach to inertial fusion, as compared with other particle beam systems, is the relative simplicity involved in the transport and focusing of energy on the target inside a reactor chamber. While this focusing could be done in vacuum by conventional methods with multiple beams, there are significant advantages in reactor design if one can operate at gas pressures around one torr. In this paper we summarize the results of our studies of heavy ion beam transport in gases. With good enough charge and current neutralization, one could get a ballistically-converging beam envelope down to a few millimeters over a 10 meter path inside the chamber. Problems of beam filamentation place important restrictions on this approach. We also discuss transport in a self-focused mode, where a relatively stable pressure window is predicted similar to the observed window for electron beam transport.

The paper describes the control and instrumentation for the Mirror Fusion Test Facility at the Lawrence Livermore National Laboratory, California, USA. This large-scale scientific experiment in controlled thermonuclear fusion, which is currently being expanded, originally had 3000 devices to control and 7000 sensors to monitor. A hierarchical computer control system, is used with nine minicomputers forming the supervisory system. There are approximately 55 local control and instrumentation microcomputers. In addition, each device has its own monitoring equipment, which in some cases consists of a small computer. After describing the overall system a more detailed account is given of the control and instrumentation for two large superconducting magnets.