In homogeneous nuclear reactors significant quantities of radioactive inert gaseous fission products must be separated from the fuel solution for disposal. The present disposal scheme, which is employed on the HRT, is to pass the mixture of fission product gases and oxygen through a charcoal adsorption bed. the oxygen passes through the bed relatively un-adsorbed, but the radioactive inert gases are adsorbed and are displaced from the bed bed very slowly giving the gases a much greater residence time than would exist if no bed were used. This long residence or "holdup" time permits the short-lived inert gases to decay away before emission to the atmosphere and thus greatly reduces the safety hazard produced by disposal of the gases to the atmosphere. The same effect could be obtained by using a large holdup tank, but the charcoal bed is much more compact and thus required less shielding.

Although the results reported herein are rather encouraging and show the possibilities of utilizing flotation to increase recoveries and in some instances grades, they should not not be considered an optimum. As stated previously, time did not permit a detailed investigation of all reagents an conditions to obtain maximum grades and recoveries, but sufficient data, with enough typical samples, have been obtained to indicate a definite trend and encouragement for further studies. A comparison of the flotation results obtained with each of the samples is presented in Table 2.

Certain solutions of the cylindrical wave-equation, such as the Possio integral, which are needed in the investigation of 2-dimensional weak-shocks are are determined in this paper.

This method essentially consists of analyzing x-ray filtration data in terms of Laplace transforms and obtaining the spectral energy distribution in terms of a sum of the corresponding inverse Laplace transforms. Some of the functions which are especially suited for this application are given and a graphical method of analyzing filtration data in terms of these functions is described. Examples of the practical application of this method to several low energy x-ray machines are included with a discussion of the advantages, disadvantages, and probable uncertainties which are involved.

"A summary is presented of a preliminary study of the application of pole- face windings to the Cambridge Electron Accelerator. Estimates are made of the currents required, the forces on the wibdings and the voltages induced by the magnetic flux. The possibility of automatic control of the pole-face currents in explored, and feasible control systems are suggested."