The DOE Cooperative Agreement No. DE-FC22-91PC90550 dated March 11, 1991, Public Service Company of Colorado has prepared the following quarterly report for Phases I, IIA, and IIB of the Integrated Dry NO{sub x}SO{sub 2} Emissions Control System Project. This project includes low NO{sub x} burners with NO{sub x} ports (post firing air injection), humidification and dry sorbent injection.

The 12 papers included were entered into the data base separately. (WHK)

On February 14 and 15, 1978, a workshop on solar power development and thermal and thermochemical energy storage technology was held at Golden, Colorado. These proceedings contain the record of this workshop. They are divided into two volumes. Volume I presents an analysis and condensation of information discussed in round-table plenary sessions.

The DOE Cooperative Agreement No. DE-FC22-91PC90550 dated march 11, 1991, Public Service Company of Colorado has prepared the following quarterly report for Phases I, IIA, and IIB of the Integrated Dry No{sub x}/SO{sub 2} Emissions Control System Project. This project includes low NO{sub x} burners with NO{sub x} ports (post firing air injection), humidification and dry sorbent injection.

Initial Tandem Mirror Hybrid Study predicts the ability to produce large amounts of fissile fuel (2 to 7 tonnes per year U233 from a 4000 MW plant) at a cost that adds less than 25% to the cost of power from an LWR.

Research on the technical and economic feasibility of producing solar-cell-quality sheet silicon by coating inexpensive ceramic substrates with a thin layer of polycrystalline silicon is reported. The coating methods to be developed are directed toward a minimum-cost process for producing solar cells with a terrestrial conversion efficiency of 11 percent or greater. By applying a graphite coating to one face of a ceramic substrate, molten silicon can be caused to wet only that graphite-coated face and produce uniform thin layers of large-grain polycrystalline silicon; thus, only a minimal quantity of silicon is consumed. A variety of ceramic materials have been dip coated with silicon. The investigation has shown that mullite substrates containing an excess of SiO/sub 2/ best match the thermal expansion coefficient of silicon and hence produce the best SOC layers. With such substrates, smooth and uniform silicon layers 25 cm/sup 2/ in area have been achieved with single-crystal grains as large as 4 mm in width and several cm in length. Crystal length is limited by the length of the substrate. The thickness of the coating and the size of the crystalline grains are controlled by the temperature of the melt and the rate at which the substrate …

The impact of diameter in the range of 10 to 15 cm on the cost of wafers sliced from Czochralski ingots is analyzed. Increasing silicon waste and decreasing ingot cost with increasing ingot size are estimated along with projected costs. Results indicate a small but continuous decrease in sheet cost with increasing ingot size in this size range. Sheet costs including silicon are projected to be $50 to $60/m/sup 2/ (1980 $) depending upon technique used.

The objective of this project is to demonstrate on a commercial scale several innovative applications of cost-reducing technology to the Chiyoda Thoroughbred-121 (CT-121) process. CT-121 is a second generation flue gas desulfurization (FGD) process which is considered by the Electric Power Research Institute (EPRI) and Southern Company Services (SCS) to be one of the most reliable and lowest cost FGD options for high-sulfur coal-fired utility boiler applications. Demonstrations of the innovative design approaches will further reduce the cost and provide a clear advantage to CT121 relative to competing technology.

CONC/11 is a computer program designed for calculating the performance of dish-type solar thermal collectors and power systems. It is intended to aid the system or collector designer in evaluating the performance to be expected with possible design alternatives. From design or test data on the characteristics of the various subsystems, CONC/11 calculates the efficiencies of the collector and the overall power system as functions of the receiver temperature for a specified insolation. If desired, CONC/11 will also determine the receiver aperture and the receiver temperature that will provide the highest efficiencies at a given insolation. The program handles both simple and compound concentrators. CONC/11 is written in Athena Extended Fortran (similar to Fortran 77) to operate primarily in an interactive mode on a Sperry 1100/81 computer. It could also be used on many small computers.

The health and safety analysis is part of an overall effort to identify and develop innovative underground coal extraction systems. The single-entry tunnel borer system was initially considered an innovative approach to underground mining because it exhibited a means of increasing the speed and efficiency of entry development by reducing the number of entries. However, to be considered a truly advanced system, the tunnel borer had to meet distinct safety criteria as well. The objective was to examine the tunnel borer design and determine whether it offset major health hazards, and satisfied the prescribed safety levels. As a baseline for comparison, the tunnel borer was compared against the continuous mining entry driving system. The results of the health analysis indicated that while the tunnel borer design offered improvements in dust control through the use of water sprays, a higher face ventilation rate, and the application of spalling rather than the conventional grinding process, it interjected an additional mutagenic is and toxic compound into the environment through the use of shotcrete. The tunnel borer system easily conformed with the prescribed fatality limit, but exceeded the required limits for disabling and overall injuries. It also exhibited projected disabling and overall injury rates …

Stress analysis at Harvard University has examined the implication of non-zero interface stresses on model predictions. Stress distributions at distances greater than about 1 mm from the interface are shown to be independent of the interface stress at high creep intensities, and the predictions based on zero initial stress can be used with confidence. Numerical models for growth dynamics developed at MIT are compared with experimental data on t-V relationships and on interface shape obtained from impurity redistribution in aluminum-doped 10 cm wide ribbon. Comparison of primary creep responses in FZ (floating zone) and CZ (Czochralski) silicon above 1200/sup 0/C using four-point bending indicates that oxygen has a significant influence on the creep rate. Both the strain rate and resulting dislocation densities generated in FZ silicon are an order of magnitude higher than for the CZ material at comparable applied stress levels. A fiber optics probe suitable for temperature measurement during sheet growth has been constructed and tested. Study of the feasibility of using laser interferometric techniques for residual stress measurements has continued at the University of Illinois. The method has been successfully applied to CZ silicon, and is being evaluated for use with EFG ribbon.

Studies of defects in plasma-deposited, hydrogenated amorphous silicon (a-Si:H), covering the period February 1979-January 1980 are described. Substantial progress has been made in understanding defect structures, their electronic properties and the influence of doping. The two most significant results are surprising, in one case for simplicity where complexity was expected, and in the other for complexity where simplicity had been presumed. In the first study we have clarified the nature of the defects by showing the connection between luminescence and light induced ESR experiments. The results indicate that dangling bonds having a positive electronic correlation energy are sufficient to explain most of the experimental information. The second study demonstrates the existence of microstructural inhomogeneities, arising from the nucleation and growth of the films. Thus the usual assumption of a uniform alloy with a random distribution of defects must be modified in considering processes such as electrical conduction, trapping, recombination, hydrogen effusion, etc. Of considerable technological and fundamental interest is the influence of doping on the defect behavior. Previous indications that doping introduces defect states have been confirmed. It remains to determine why this behavior occurs, and if there are any means of circumventing the problem.

Progress is reported on analytical R and D for the nuclear explosives programs (coupling of gas chromatograph, mass spectrometer, and infrared spectrometer; analysis of fluorocarbon FC-86; far-infrared laser development; transient behavior of n-type TiO/sub 2/ semiconductor photoelectrodes; and impurities on Kevlar 49 fibers) and for the energy programs (on-line mass spectroscopy of oil shale and testing of additives for controlling the scaling of hypersaline geothermal brine). (DLC)

Four feasibility studies have been developed by the INEL on thermal enhanced oil recovery (TEOR) Use of Supercritical Fluid processes for Detoxification of Pollutants, and Hydraulic Conversion to Electricity, and Direct Use. The studies provide information bases for potential industrial partners in the resource utilization. A joint proposal from Los Alamos National Laboratory (LANL) and INEL on supercritical fluid processes in going forward. Western Resources Technology has begun development of a dozen geopressured well projects. An hydraulic turbine test will be conducted at Pleasant Bayou in Summer of 1991. Dr. Wayne Steele of Anglewood, TX, a retired medical doctor, is proposing to raise fresh water Australian lobsters in the Pleasant Bayou Well fire water pond. Additional projects such as catfish farming, crayfish, desalintion plant and agricultural greenhouse use of the resource heat are waiting in the wings'' for the DOE wells to become available for pilot use projects. 2 figs.

This summary report presents a condensation of the designs as developed from requirements and concept selection to preliminary design. The study consists of the following six tasks: (1) Design requirements: establish design environmental conditions and criteria. Develop methodology to both assess SKSS reliability and performance, and minimize life cycle costs. (2) Conceptual design: develop at least two SKSS conceptual designs for both barge and spar platform (eight in all). Consider commercial plant SKSS, verify feasibility, define problem areas, estimate life cycle cost. Develop deployment, operation and maintenance scenarios. Recommend an SKSS concept for each platform. (3) Preliminary design; prepare preliminary designs for two SKSS concepts selected by NOAA/DOE. Optimize the designs, provide deployment and retrieval procedures, support requirements, evaute reliability and performance. Assess effects of watch circle and water depth variation. (4) Development and testing recommendations: recommend programs required to confirm design assumptions and performance predictions, including material and component development, and soils investigation. Estimate cost and schedule required to perform these programs. (5) Cost-time analysis: develop a detailed cost and schedule for the acquisition, transportation, deployment, inspection, maintenance, spares, replacement and salvage for the SKSS designs. (6) Commercial plant SKSS recommendations: assess applicability of designs to commercial plant SKSS. …

Tailored ceramics are crystalline assemblages made by high-temperature and pressure consolidation of a nuclear waste with selected additives. The multitask program includes waste form development and characterizations, and process and equipment development. (DLC)

Experimental results are reported from two measurementtechniques (semiconductor switching and electro-optic sampling) thatallow temporal characterization of electron bunches produced by alaser-driven plasma-based accelerator. As femtosecond electron bunchesexit the plasma-vacuum interface, coherent transition radiation (at THzfrequencies) is emitted. Measuring the properties of this radiationallows characterization of the electron bunches. Theoretical work on theemission mechanism is represented, including a model that calculates theTHz waveform from a given bunch profile. It is found that the spectrum ofthe THz pulse is coherent up to the 200 mu m thick crystal (ZnTe)detection limit of 4 THz, which corresponds to the production of sub-50fs (root-mean-square) electron bunch structure. The measurementsdemonstrate both the shot-to-shot stability of bunch parameters that arecritical to THz emission (such as total charge and bunch length), as wellas femtosecond synchrotron between bunch, THz pulse, and laserbeam.

None

The Center for Extended Magnetohydrodynamic Modeling (CEMM) is developing computer simulation models for predicting the behavior of magnetically confined plasmas. Over the first phase of support from the Department of Energy’s Scientific Discovery through Advanced Computing (SciDAC) initiative, the focus has been on macroscopic dynamics that alter the confinement properties of magnetic field configurations. The ultimate objective is to provide computational capabilities to predict plasma behavior—not unlike computational weather prediction—to optimize performance and to increase the reliability of magnetic confinement for fusion energy. Numerical modeling aids theoretical research by solving complicated mathematical models of plasma behavior including strong nonlinear effects and the influences of geometrical shaping of actual experiments. The numerical modeling itself remains an area of active research, due to challenges associated with simulating multiple temporal and spatial scales. The research summarized in this report spans computational and physical topics associated with state of the art simulation of magnetized plasmas. The tasks performed for this grant are categorized according to whether they are primarily computational, algorithmic, or application-oriented in nature. All involve the development and use of the Non-Ideal Magnetohydrodynamics with Rotation, Open Discussion (NIMROD) code, which is described at http://nimrodteam.org. With respect to computation, we have tested and …

TMVOC-MP is a massively parallel version of the TMVOC code (Pruess and Battistelli, 2002), a numerical simulator for three-phase non-isothermal flow of water, gas, and a multicomponent mixture of volatile organic chemicals (VOCs) in multidimensional heterogeneous porous/fractured media. TMVOC-MP was developed by introducing massively parallel computing techniques into TMVOC. It retains the physical process model of TMVOC, designed for applications to contamination problems that involve hydrocarbon fuels or organic solvents in saturated and unsaturated zones. TMVOC-MP can model contaminant behavior under 'natural' environmental conditions, as well as for engineered systems, such as soil vapor extraction, groundwater pumping, or steam-assisted source remediation. With its sophisticated parallel computing techniques, TMVOC-MP can handle much larger problems than TMVOC, and can be much more computationally efficient. TMVOC-MP models multiphase fluid systems containing variable proportions of water, non-condensible gases (NCGs), and water-soluble volatile organic chemicals (VOCs). The user can specify the number and nature of NCGs and VOCs. There are no intrinsic limitations to the number of NCGs or VOCs, although the arrays for fluid components are currently dimensioned as 20, accommodating water plus 19 components that may be either NCGs or VOCs. Among them, NCG arrays are dimensioned as 10. The user may select …

Although electrokinetic effects are not new, only recently have they been investigated for possible use in energy conversion devices. We have recently reported the electrokinetic generation of molecular hydrogen from rapidly flowing liquid water microjets [Duffin et al. JPCC 2007, 111, 12031]. Here, we describe the use of liquid water microjets for direct conversion of electrokinetic energy to electrical power. Previous studies of electrokinetic power production have reported low efficiencies ({approx}3%), limited by back conduction of ions at the surface and in the bulk liquid. Liquid microjets eliminate energy dissipation due to back conduction and, measuring only at the jet target, yield conversion efficiencies exceeding 10%.

This sampling and analysis instruction (SAI) provides the requirements for sample collection and laboratory analysis to evaluate the extent of hexavalent chromium contamination present in the soil below the 100-C-7 and 100-C-7:1 remedial action waste site excavations.

An over-dense microwave driven ion source capable ofproducing deuterium (or hydrogen) beams at 100-200 mA/cm2 and with atomicfraction>90 percent was designed and tested with an electrostaticlow energy beam transport section (LEBT). This ion source wasincorporatedinto the design of an Accelerator Driven Neutron Source(ADNS). The other key components in the ADNS include a 6 MeV RFQaccelerator, a beam bending and scanning system, and a deuterium gastarget. In this design a 40 mA D+ beam is produced from a 6 mm diameteraperture using a 60 kV extraction voltage. The LEBT section consists of 5electrodes arranged to form 2 Einzel lenses that focus the beam into theRFQ entrance. To create the ECR condition, 2 induction coils are used tocreate ~; 875 Gauss on axis inside the source chamber. To prevent HVbreakdown in the LEBT a magnetic field clamp is necessary to minimize thefield in this region. Matching of the microwave power from the waveguideto the plasma is done by an autotuner. We observed significantimprovement of the beam quality after installing a boron nitride linerinside the ion source. The measured emittance data are compared withPBGUNS simulations.

Stimulated sulfate-reduction is a bioremediation technique utilized for the sequestration of heavy metals in the subsurface.We performed laboratory column experiments to investigate the geoelectrical response of iron sulfide transformations by Desulfo vibriovulgaris. Two geoelectrical methods, (1) spectral induced polarization (SIP), and (2) electrodic potential measurements, were investigated. Aqueous geochemistry (sulfate, lactate, sulfide, and acetate), observations of precipitates (identified from electron microscopy as iron sulfide), and electrodic potentials on bisulfide ion (HS) sensitive silver-silver chloride (Ag-AgCl) electrodes (630 mV) were diagnostic of induced transitions between an aerobic iron sulfide forming conditions and aerobic conditions promoting iron sulfide dissolution. The SIP data showed 10m rad anomalies during iron sulfide mineralization accompanying microbial activity under an anaerobic transition. These anomalies disappeared during iron sulfide dissolution under the subsequent aerobic transition. SIP model parameters based on a Cole-Cole relaxation model of the polarization at the mineral-fluid interface were converted to (1) estimated biomineral surface area to pore volume (Sp), and (2) an equivalent polarizable sphere diameter (d) controlling the relaxation time. The temporal variation in these model parameters is consistent with filling and emptying of pores by iron sulfide biofilms, as the system transitions between anaerobic (pore filling) and aerobic (pore emptying) conditions. The …