Report presenting an investigation of the performance of a diffuser static-pressure-ratio control with a normal shock-positioning limit on a ramjet engine installed in an altitude free-jet facility. Testing occurred at Mach numbers of 2.35 and 2.50, altitudes of 50,000, 60,000 and 65,000 feet, and angles of attack of 0 and 7 degrees. Results regarding the effects of control constants, effects of disturbance size and operating point, effects of flight conditions, and control limitations and possible improvements are provided.

Injection techniques for fluorine, oxygen, and heptane in 200-pound thrust rocket engine.

Memorandum presenting a transonic flutter investigation of models of the wing of a current fighter airplane. The models were dynamically and elastically scaled in accordance with criteria which include a flutter safety margin. Results regarding the presentation of data, interpretation of results, wings without leading-edge chord-extensions, and wings with leading-edge chord-extensions are provided.

"A 1/13-scale model of the forebody of the Republic F-105 with twin-duct wing-root inlets was tested in the Langley 4- by 4-foot supersonic pressure tunnel through a range of angle of attack from -4 deg to 15 deg at a Mach number of 2.01 and a Reynolds number of approximately 3.4 x 10(exp 6) per foot. The tests were made with four configurations which incorporated varying amounts of sweep and stagger of the inlet leading edges, modifications to the areas of the boundary-layer diverter floor plate, and modifications to the area of the boundary-layer diverter bleed slots. The highest overall pressure recovery at an angle of attack of 0 deg (average total-pressure recovery, 0.84 mass-flow ratio, 0.98) was achieved with configuration having an inlet leading-edge sweep angle of 58 deg with no leading-edge stagger" (p. 1).

Wind tunnel testing of swept wing fighter aircraft model for determining drag and static longitudinal and lateral stability and control characteristics. Results regarding performance, longitudinal stability, lateral stability, and strakes are provided.

Report discussing an investigation to determine the free-jet performance characteristics of the XRJ43-MA-3 20B3 ram-jet engine at a Mach number of 2.70 at several angles of attack, inlet temperatures, and fuel-air ratios. Information about the inlet supercritical mass-flow ratio, diffuser-outlet Mach number contours, and effect of angle of attack and inlet temperature on engine performance is provided.

Report discussing the performance of a 20-inch-diameter ram-jet engine at Mach number 3.0 over a range of simulated altitudes from 60,500 to 66,500 feet. Information about the maximum combustor efficiency, range of exhaust-nozzle total pressures, lean blow-out, diffuser total-pressure recovery, and internal thrust coefficient is provided.

Memorandum presenting an experimental investigation of a two-dimensional, 6.6-percent-thick, 6-foot-chord airfoil section equipped with suction slots for laminar-boundary-layer control. The section was designed to have favorable pressure gradients between the suction slots. The laminar boundary layer on the airfoil had the same extreme sensitivity to minute details of the model surface condition as has been found in other investigations.

From Summary: "The effects of primary and runback ice formations on the section drag of a 36 deg swept NACA 63A-009 airfoil section with a partial-span leading-edge slat were studied over a range of angles of attack from 2 to 8 deg and airspeeds up to 260 miles per hour for icing conditions with liquid-water contents ranging from 0.39 to 1.23 grams per cubic meter and datum air temperatures from 10 to 25 F. The results with slat retracted showed that glaze-ice formations caused large and rapid increases in section drag coefficient and that the rate of change in section drag coefficient for the swept 63A-009 airfoil was about 2-1 times that for an unswept 651-212 airfoil. Removal of the primary ice formations by cyclic de-icing caused the drag to return almost to the bare-airfoil drag value. A comprehensive study of the slat icing and de-icing characteristics was prevented by limitations of the heating system and wake interference caused by the slat tracks and hot-gas supply duct to the slat. In general, the studies showed that icing on a thin swept airfoil will result in more detrimental aerodynamic characteristics than on a thick unswept airfoil."

Report presenting the initial development of a technique for the qualitative study of the stability and control characteristics of a free, self-propelled, dynamic submarine model. Two types of control systems were evaluated. Results regarding the qualitative analysis of the control system, dive paths, equations of motion, and comparison with experimental paths are provided.

From Introduction: "The feasibility of closed-loop control of ram-jet-engine thrust is demonstrated in references 1 and 2. The dynamic behavior of a 28-inch-diameter ram-jet engine designed to operate in Mach number range of 2.35 to 2.70 is evaluated herein."

Memorandum presenting a generalized analysis of the effects of turbojet propulsion system development and fuel selection on ability of a strategic bomber to perform desired and minimum missions. The variation of bomber performance using a hydrocarbon, boron, or nuclear fuel is discussed.

Report discussing a transonic flutter investigation of models of the T-tail of the Blackburn NA-39 airplane. The investigation was made at a variety of Mach numbers at simulated altitudes extending to below sea level. The Mach numbers at which asymmetric flutter and symmetric oscillations occur are presented.

"Tabulated pressure coefficients and aerodynamic characteristics are presented unanalyzed for six spanwise stations on the right wing of the Douglas D-558-I research airplane (BuAero No. 37972). The data were obtained in a 1 g stall at subcritical Mach numbers, in a speed run to a Mach number of 0.90 and in a wind-up turn at a Mach number of 0.86" (p. 1).

Report discussing testing of a model of the McDonnell F3H-2N to determine its pitch-up and buffet boundaries and its longitudinal stability and control data obtainable with the pulse-tail technique. Stability was found to be less at low trim angles of attack than at high trim angles of attack up to a point. The buffet boundary was not obtainable through this testing.

Report discussing testing of two models of the Chance Vought Regulus II missile to determine its drag characteristics for a range of Mach numbers. The measured total-drag-coefficient data was extrapolated to external-drag-coefficient data and presented.

Memorandum presenting a supersonic wind-tunnel investigation of the origin and distribution of store interference performed in the 4- by 4-foot supersonic pressure tunnel at a Mach number of 1.6 in which separate forces on a store and on a 60 degree delta-wing-fuselage combination were measured. The configuration in this report simulates a heavy-bomber delta-wing airplane and has a large external symmetrical store that represents a nacelle with a frontal area equivalent to a twin-engine nacelle.

Memorandum presenting a supersonic wind-tunnel investigation of the origin and distribution of store interference in the 4- by 4-foot supersonic pressure tunnel at a Mach number of 1.61 in which separate forces on a store, a fuselage, a swept wing, and a swept-wing-fuselage combination were measured. The report presents data on a configuration which simulated a fighter-bomber airplane with a large and a small external store.

Memorandum presenting a review of some of the analytical and experimental studies of the use of liquid hydrogen as a jet-engine fuel and which show the possible extension of aircraft performance that will follow adequate research and development effort on the problem of its use.

Memorandum presenting a study of the effect of oxide-depositing fuels on engine starting, operation, and performance by using a modified production turbojet engine operated using a trimethyl borate azeotrope as a fuel. Results regarding boric oxide deposition, engine operation and performance, effect of turbine-inlet temperature, and dissipation of boric oxide deposits are provided.

Memorandum presenting an experimental investigation of an internal-contraction, axially symmetric inlet with isentropic compression surfaces on both the cowl and centerbody conducted over a range of Mach numbers from 2.0 to 2.7 at angles of attack from 0 to 6 degrees. The study was made to determine the optimum bleed system, together with a method of controlling the inlet.

Memorandum presenting a computation and comparison of the thrust augmentation and accompanying total fuel flow for four afterburner fuels and a rocket. Four turbojet engines burning JP-4 primary fuel and several operating conditions were selected for the analyses.

Report presenting an investigation of the release characteristics of dynamically scaled stores carried internally in a simulated bomb bay at Mach numbers of 1.39 and 1.98. A model of the Republic F-105 half-fuselage and bomb-bay configuration was tested with four store shapes: the MK-7 store, the bluff store, the TX-28 store, and turnabout TX-28 store. Results regarding ejection photographs and data plots are also provided.

Memorandum presenting an investigation conducted in the supersonic pressure tunnel on canopy pressures and canopy-fuselage forces and moments under conditions of combined pitch and sideslip. The canopy configurations tested varied in windshield shape, location on the fuselage, and fineness ratio. Results regarding force and moment data, pressure data, and force and pressure correlation are provided.