This is a report of work completed during the period January 1, 1962, to March 31, 1962. Work was done on fuel irradiation, activation studies and UO2 scattering experiment

The work described in this report represents progress toward an agreement signed by the United States and the European Atomic Energy Community which provides a basis for cooperation in programs for the advancement of peaceful applications of atomic energy.

The Program fuel element has continued under irradiation in the Vallecitos Boiling Water Reactor, thermal energy group transfer cross sections for UO2 have been computed, and data have been reduced from the resonance wire activations performed last quarter. Future plans are included.

From introduction: "This is the fifteenth in a series of quarterly reports which cover the progress and results from the conceptual designs, economic evaluations and research and development work performed by the General Electric Company as part of Contract AT(01-3)-189, Project Agreement No. 13."

From introduction: "This is the seventeenth in a series of quarterly reports which cover the progress and results from the conceptual designs, economic evaluations and research and development work performed by the General Electric Company as part of Contract AT(01-3)-189, Project Agreement No. 13."

From introduction: "This is the sixteenth in a series of quarterly reports which cover the progress and results from the conceptual designs, economic evaluations and research and development work performed by the General Electric Company as part of Contract AT(01-3)-189, Project Agreement No. 13."

From introduction: "This is the eighteenth in a series of quarterly reports which cover the progress and results from the conceptual designs, economic evaluations and research and development work performed by the General Electric Company as part of Contract AT(01-3)-189, Project Agreement No. 13."

Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. The development of pulsed neutron source techniques for large power reactors has led to a new theoretical model recently developed by E. Garelis and J.L. Russell, Jr. The theory is presently based on a bare, one-group model with m-delayed precursors and takes all spatial modes into account. Results indicate, however, that the application of this model is much broader. Experiments were designed and carried out to both verify this new theory and to demonstrate the performance of the experimental hardware in a large power reactor.

Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. The development of pulsed neutron source techniques for large power reactors has led to a new theoretical model recently developed by E. Garelis and J.L. Russell, Jr. The theory is presently based on a bare, one-group model with m-delayed precursors and takes all spatial modes into account. Results indicate, however, that the application of this model is much broader. Experiments were designed and carried out to both verify this new theory and to demonstrate the performance of the experimental hardware in a large power reactor.

This document presents the results of investigations concerned with the conceptual design of a 300 KWe "Capsule" nuclear power plant.

A design and economic analysis is presented for a 44,000 DWT tanker utilizing a 27,300 shp direct cycle boiling water reactor propulsion system. Included are design descriptions and drawings, estimates of operating and capitol costs for the reference ship, estimates of long range potential, descriptions of required research and development programs, a preliminary safeguards analysis, an analysis of ship's motion on boiling water reactor performance, a summary reactor physics analysis, and a discussion of direct cycle accessibility considerations. Also included are summary descriptions for various design alternatives which were considered.

Abstract: (1) Grain growth in UO2 pellets was studies between 100 C and 2600 C. The pellets were encapsulated in small vacuum-tight tungsten containers in an argon atmosphere. (2) The grain size-time relationship could be expressed by an equation. A low exponent, m>_ 1/3, was found in those experiments and is related to the type of UO2 investigated. An activation energy of 65 kcal/mole was obtained for the grain growth process. The time exponent, m, increased with increasing temperature if the pellets were not contained in closed capsules bu heated under an argon pressure of 1.5 atm. (3) An interaction between tungsten and UO2 could be observed at a a temperature of 2600 C after prolonged heat treatment.

From introduction: "Development of nuclear reactor cores having high power density, long fuel life, and low fabrication costs is the objective of this program sponsored by the AEC."

Quarterly progress report discussing activities related to the Vallecitos Boiling Water Reactor (VBWR) and related facilities.

Quarterly progress report discussing activities related to the Vallecitos Boiling Water Reactor (VBWR) and related facilities.

BOUNCE III is a program which was written for the IBM-704 as part of a study of the parameters of the neutron distribution in a large thermal column. The program calculates the eigenvalues and corresponding eigenvectors of the matrix resulting from a diffusion-theory, multigroup description of the thermal neutron spectrum.

VARI solves on the IBM-650 a system of simultaneous, first-order, ordinary, differential equations. The program was written so that a large number of calculations could be done in a reasonable length of time. The program permits the consideration of the production of the isotope by absorption and/or decay of one or more of any of the other isotopes in the chain.

Quarterly report discussing progress on the Fast Ceramic Reactor Development Program, "an integrated analytical and experimental program directed toward the development of fast reactors employing ceramic fuels, with particular attention to mixed plutonium-uranium oxide" (p. 1).

Experimental test loops have been used to study the problem of hydraulic stability. The oscillatory behavior of a single-phase and two-phase natural circulation loop has been examined at atmospheric pressures and oscillating modes of operation were studied in terms of heat input.

Summary: A prototype control rod containing absorber plates made from an electro- deposited dispersion of boron carbide in nickel was tested in the VBWR. It was exposed to the reactor environment of 545 degree F boiling water and thermal neutron fluxes (perturbed) which ranged from 0.6 to 1.1 x 10/sup 13/ nv for 2236 hours over a period of six months. The maximum B/sup 10/ burnup achieved during the test period was 1.8 percent. After irradiation, the rod was examined. The results of the examination are summarized below: (1) The B/sub 4/C-- Ni plate assembly did not undergo significant dimensional changes during irradiation. (2) Numerous blisters developed on both the outer and inner surfaces of three of the four plates. Blistering was more severe on the outer surface than on the inner, and was most severe in a large region located in the lower half of plate 4. Metallographic examination revealed that the blisters were located only in the 2- mil protective nickel overlay covering the B/sub 4/C-- Ni dispersion. It was concluded that they formed from the buildup of gas pressure at the Ni: Ni-- B/sub 4/C interfaces, rather than from corrosion attack. Helium from the B/sup 10/(n alpha …

From introduction: "This is the fourteenth in a series of quarterly reports which will cover the progress and results from the conceptual design, economic evaluations and research and development work performed by the General Electric Company as part of the Nuclear Superheat Project."

From introduction: "This is the thirteenth in a series of quarterly reports which will cover the progress and results from the conceptual design, economic evaluations and research and development work performed by the General Electric Company as part of the Nuclear Superheat Project."

Methods for analyzing chemical impurities in sodium metal samples are presented. Chemical analysis was used to determine the following impurities: Calcium, Carbon, Chromium, Iron, Lithium, Nickel, Oxygen, Potassium, and Zirconium. Spectrographic analysis was used to determine many other impurities. Sodium samples obtained from experimental apparatus operated as part of the work being conducted for Atomics International were analyzed by these methods.

A research program is being conducted to obtain experimental data in the irradiation of plutonium-enriched fuel to confirm a theoretical model for predicting isotopic composition and reactivity changes in plutonium-enriched, light-water-moderated reactors. All program efforts have been temporarily deferred except for those associated with the irradiation of the program fuel element in the VBWR. The program fuel element was exposed to a burnup of 831 MWD/T during the quarter which brings the total to 3165 MWD/T. Applying the same scale factor between logged exposure and Ce-Cs analysis of the first fuel sample gives a corrected exposure of 3774 MWD/T.