Report discussing an investigation of two 45 degree swept blades in low-speed cascade tunnels at a range of angles of attack and various combinations of inlet-air angle and solidity. The isolated wing method used to design the blade predicted the twist distribution and camber shape necessary to obtain an almost uniform spanwise loading.

"Dynamic yawing effects on vertical-tail loads are considered by a theory of flat yawing maneuvers. A comparison is shown between computed loads and the loads measured in flight on a fighter airplane. The dynamic effects were investigated on a large flying boat for both an abrupt rudder deflection and sinusoidal rudder deflection" (p. 91).

Report presenting an investigation in which the inlet-guide-vane setting of a 10-stage compressor was reduced in order to approximate more closely the design absolute entrance flow angles to the first rotor. In order to determine the effects of these changes, the performance of the inlet stage was obtained simultaneously with the overall compressor performance for both the original and reduced incidence angles. Results regarding the compressor performance, inlet-stage performance, and effect of guide-vane resetting on compressor performance are provided.

"The lateral-directional-stability derivatives of a body in combination with several triangular wings were determined at subsonic and supersonic speeds. The wings used in the investigation were of aspect ratios 2 and 4 and thickness ratios of 3 and 5 percent. One of the wings of aspect ratio 2 was cambered and twisted. The results indicate that at supersonic speeds the effects of plan form on the lateral-directional-stability derivatives for the plane wings were predicted satisfactorily by linearized theory and that the effects of thickness were small" (p. 1).

"The method of superposition of linearized conical flows has been applied to the calculation of the aerodynamic properties, in supersonic flight, of thin flat, swept-back wings at an angle of attack. The wings are assumed to have rectilinear plan forms, with tips parallel to the stream, and to taper in the conventional sense. The investigation covers the moderately supersonic speed range where the Mach lines from the leading-edge apex lie ahead of the wing" (p. 1147).

A theoretical analysis is presented for obtaining, by use of Theodorsen's propeller theory, the load distribution along a propeller radius to give the optimum propeller efficiency for any design condition. The efficiencies realized by designing for the optimum load distribution are given in graphs, and the optimum efficiency for any design condition may be read directly from the graph without any laborious calculations. Examples are included to illustrate the method of obtaining the optimum load distributions for both single-rotating and dual-rotating propellers.

Report presenting tests to determine the recovery of total pressure attainable at a range of Mach numbers, which were performed with models with twin-scoop inlets situated on the sides of a long forebody. Results regarding ducts without slots and ducts with slots are provided.

Report presenting information on the engine performance variations resulting from bleeding air from the compressor for turbine cooling, which is currently lacking. A thermodynamic-cycle investigation was conducted to determine the magnitude of the performance variations for a wide range of operating conditions for turboprop engines and for both afterburning and nonafterburning turbojet engines.

The efficiency of a 30 degree conical diffuser was improved as much as 20 percent and separation was eliminated by the use of vortex generators. The use of splitter cones gave only small efficiency gains, but relatively uniform diffuser-outlet velocity profiles were obtained with the better designs. A configuration which incorporated both vortex generators and a splitter cone gave efficiencies higher than those obtained with any other splitter-cone configuration and also higher than those obtained when the same vortex generators were used without the splitter cone.

Memorandum presenting a description of a method of telemetering skin temperature using a small resistance wire pickup with a time constant of less than 0.003 second to determine boundary-layer heat-transfer coefficients. An evaluation of the accuracy of the method of measuring the heat-transfer coefficient is given for a particular application.

Report presenting an exploration of fuel temperatures, which includes variables such as the aircraft speed, flight time, flight altitude, materials of construction, location of fuel tanks relative to aircraft skin and hot engine parts, and other factors. The results illustrate that it is impossible to predict quantitatively the fuel temperatures that will be attained in aircraft without detailed design information on each machine.

Report presenting the use of Theodorsen's propeller theory to calculate the performance of a dual-rotating propeller with nonideal load distributions. Results regarding the propeller characteristics were made for several blade-angle settings and flight Mach numbers.

Report presenting drag data obtained from the flight of a 0.11-scale rocket-boosted model of the Chance Vought XF8U-1 airplane over a range of Mach numbers. Results regarding the duct performance, trim normal-force coefficient, total drag, internal and base drag, and external drag are provided.

Report presenting the effects of blunting the trailing edge or rounding the leading edge on the lift, drag, and pitching-moment characteristics of a plane tapered wing in combination with a body at a range of Mach numbers. Results regarding the effect of wing nose shape on the aerodynamic characteristics are also provided,.

Memorandum presenting transition tests made in free-flight on a slender body of revolution at Mach number 3.5, wall to free-stream temperature ratio of unity, and with a noiseless and zero-turbulence air stream. The parameter which was varied was surface roughness. Results regarding tests at a Reynolds number of 12 million and 24 million, bursts of turbulence, surface roughness, effect of angle of attack, and time dependence of the transition point are provided.

Report presenting an investigation in the transonic tunnel to study the effects of body indentation and afterbody shape on the aerodynamic characteristics of an unswept-wing-body combination. Body indentation for a boattail configuration resulted in a considerable reduction in drag up to the highest lift coefficients tested. Results regarding the lift and pitching-moment characteristics are also provided.

Memorandum presenting wind tunnel tests to determine the aerodynamic characteristics of a semispan wing with a modified NACA 0012-64 section and a 26.6-percent-chord, plain, trailing-edge aileron. Results are shown for the wing with the 0.229-chord line unswept and swept back 45 degrees and for a Mach number range from 0.40 to 0.925.

Report presenting the results of an investigation of a missile model with extensible control surfaces and small-span fins. Normal-force, axial-force, and pitching-moment coefficients based on body cross-sectional area and diameter are given for various control deflections up to a maximum of 30 degrees.

"The report presents a new treatment, due essentially to von Karman, of the problem of the thin airfoil. The standard formulae for the angle of zero lift and zero moment are first developed and the analysis is then extended to give the effect of disturbing or interference velocities, corresponding to an arbitrary potential flow, which are superimposed on a normal rectilinear flow over the airfoil. An approximate method is presented for obtaining the velocities induced by a 2-dimensional airfoil at a point some distance away" (p. 637).

Report presenting an investigation to determine the effects of taper ratio, body indentation, fixed transition, and afterbody shape on the transonic aerodynamic characteristics of a 45 degree sweptback wing-body combination with an aspect ratio of 4. Results were obtained at a variety of Mach numbers, angles of attack, and Reynolds numbers. Drag, lift, and stability characteristics are provided.

Memorandum presenting tests of a scale model of a B-36J/RF-84F tip-coupled airplane in the 19-foot pressure tunnel in order to evaluate the flutter characteristics where bomber-body freedoms are allowed and to obtain an indication of the dynamic stability characteristics of the configuration. The variables studied in the investigation included skew angle of the fighter-bomber coupling, fighter longitudinal position, fighter and bomber loading, angle of sideslip, degrees of body freedom, and the number of fighters.

"In the development of high temperature materials of the brittle category, the need to improve their impact strength for some applications has brought with it a demand for a simple machine for measuring impact resistance, both at room and elevated temperatures, and preferably one in which corrections such as the toss energy are negligible. This report describes such a machine and presents the results of some preliminary tests on the effect of temperature on impact strength of several alloys and cermets. A comparison is also given between the impact resistance of notched and unnotched specimens" (p. 1).

From Introduction: "The purpose of this report is (1) to describe the performance of each component over a range of altitudes, (2) to show the effect of flight conditions on operating point of each component, and (3) to summarize briefly the effects of changes in component performance with flight condition on the over-all engine performance."

"Flutter tests of sweptback cantilever wing models have been made in a small intermittent two-dimensional supersonic tunnel where the testing technique involved changing the structural parameters so that the models would flutter at the tunnel design Mach number of 1.3. Data for 21 models covering sweep angles from 30 degrees to 60 degrees and with varying parameters are included" (p. 1).