Work covered in this report includes the activities associated with the status of the simulated reactor helium supply systems and testing equipment. The progress in the screening test program is descibed; this includes: screening creep results and metallographic analysis for materials thermally exposed or tested at 750/sup 0/, 850/sup 0/, 950/sup 0/ and 1050/sup 0/C (1382/sup 0/, 1562/sup 0/, 1742/sup 0/, and 1922/sup 0/F) in controlled-purity helium. The status of creep-rupture in controlled-purity helium and air and fatigue testing in the controlled-purity helium in the intensive screening test program is discussed. The results of metallographic studies of screening alloys exposed in controlled-purity helium for 3000 hours at 750/sup 0/C and 5500 hours at 950/sup 0/C, 3000 hours at 1050/sup 0/C and 6000 hours at 1050/sup 0/C and for weldments exposed in controlled-purity helium for 6000 hours at 750/sup 0/C and 6000 hours at 1050/sup 0/C are presented and discussed.

The Livermore Regional Air Quality Model (LIRAQ) has been updated and improved. This report describes the changes that have been made in chemistry, species treatment, and boundary conditions. The results of smog chamber simulations that were used to verify the chemistry as well as simulations of the entire air quality model for two prototype days in the Bay Area are reported. The results for the prototype day simulations are preliminary due to the need for improvement in meteorology fields, but they show the dependence and sensitivity of high hour ozone to changes in selected boundary and initial conditions.

The activities of the JPL Solar Thermal Power Systems Parabolic Dish Project are summarized for FY 1981. Included are discussions on subsystem designs of concentrators, receivers, engines, power converters, and thermal transport. Analyses and test results are also included along with progress on field tests, Small Community System development and the Parabolic Dish Test Site.

Particulate deposition in molten carbonate fuel cell anodes is addressed for operation with future coal gasification power plants. Power plant systems factors affecting deposition are explored such as gas cleanup requirements for particulate removal and gasifier product gas composition differences for various gasifier types and operational modes (air blown versus oxygen blown). Effects of fuel cell characteristics (including average cell current density and fuel utilization) on anode deposition are also quantified. Particulate effects on molten carbonate fuel cell anode performance may not be as detrimental as perhaps perceived in the past. Gas cleanup to remove virtually all particles larger than one micron in diameter is expected to prevent or at least greatly reduce anode deposition. However, cathode deposition in molten carbonate fuel cells should be evaluated in the future since cathodes are likely more prone to deposition than anodes even though cathode channel particle concentrations are much lower.

This is an annotated guide to publications and other sources of information useful to Members of Congress and their staffs, covering congressional office management, the organization and operation of Congress, legislative responsibilities, services to constituents, and other duties of Congress.

The Brookhaven High Energy Neutral Beam Development Group is developing injector systems, particularly for the next generation of fusion mirror and tokamak experiments. These injectors are based on the acceleration and neutralization of negative deuterium ions, to utilize their high neutralization efficiency which is nearly independent of energy above 50 keV/nucleon.

The scope of this effort includes the theoretical development of a multi-input, multi-output (MIMO) Model Reference Control (MRC) algorithm, (i.e., model following control law), Model Reference Adaptive Control (MRAC) algorithm and the formulation of a nonlinear model of a typical electric power plant. Previous single-input, single-output MRAC algorithm designs have been generalized to MIMO MRAC designs using the MIMO MRC algorithm. This MRC algorithm, which has been developed using Command Generator Tracker methodologies, represents the steady state behavior (in the adaptive sense) of the MRAC algorithm. The MRC algorithm is a fundamental component in the MRAC design and stability analysis. An enhanced MRC algorithm, which has been developed for systems with more controls than regulated outputs, alleviates the MRC stability constraint of stable plant transmission zeroes. The nonlinear power plant model is based on the Cromby model with the addition of a governor valve management algorithm, turbine dynamics and turbine interactions with extraction flows. An application of the MRC algorithm to a linearization of this model demonstrates its applicability to power plant systems. In particular, the generated power changes at 7% per minute while throttle pressure and temperature, reheat temperature and drum level are held constant with a reasonable level …

The Development Program to Support Industrial Coal Gasification is on schedule. The efforts have centered on collecting background information and data, planning, and getting the experimental program underway. The three principal objectives in Task I-A were accomplished. The technical literature was reviewed, the coals and binders to be employed were selected, and tests and testing equipment to be used in evaluating agglomerates were developed. The entire Erie Mining facility design was reviewed and a large portion of the fluidized-bed coal gasification plant design was completed. Much of the work in Task I will be experimental. Wafer-briquette and roll-briquette screening tests will be performed. In Task II, work on the fluidized-bed gasification plant design will be completed and work on a plant design involving entrained-flow gasifiers will be initiated.

The basic formulas for kinematics and calculating yields of events for an e-p collider are presented, together with typical results.

This report presents a chart and a U.S. map describing the electoral votes by state and the changes resulted from the 1980 census.

The superconducting magnets and associated cryogenic components in A-sector represent the initial phase of installation of the Fermilab superconducting accelerator, designed to accelerate proton beams to energies of 1 TeV. Installation of the magnets, comprising one-eighth of the ring, was completed in December, 1981. Cooldown and power tests took place in the first half of 1982, concurrent with main ring use for 400 GeV high energy physics. The tests described in this paper involved 151 cryogenic components in the tunnel: 94 dipoles, 24 quadrupoles, 25 spool pieces, 3 feed cans, 4 turn-around boxes and 1 bypass. Refrigeration was supplied by three satellite refrigerators, the Central Helium Liquefier, and two compressor buildings. The magnets were powered by a single power supply.

This work presents an estimate of the energy distribution of the neutrals formed in the ion beam accelerator. However it does not determine the fraction of those neutrals which leave the neutral beam injector and go on into the reactor. To do that, more details of the beam line performance are needed.

The Advanced Coal Extraction Project is sponsored by the Department of Energy at the Jet Propulsion Laboratory to define and develop advanced underground coal extraction systems which: (1) are suitable for significant remaining resources after the year 2000, and (2) promise a significant improvement in production cost and miner safety, with no degradation in miner health, environmental quality and resource recovery. System requirements in the five performance areas have been defined by Goldsmith and Lavin (1980). Several existing computer programs for estimating life-cycle cost of mining systems have been evaluated. A commercially available program ADAM/1 was found to be satisfactory in relation to the needs of the Advanced Coal Extraction Project. Two test cases were run to confirm the ability of the program to handle non-conventional mining equipment and procedures. The results were satisfactory. The model, therefore, is recommended to the project team for evaluation of their conceptual designs. Since the model is commercially available, data preparation instructions are not reproduced in this document; instead the reader is referred to the original documents for this information.

Characteristics have been measured for the GDB-44F 2''-diameter photomultiplier. Some typical photomultiplier characteristics - such as gain, dark current, anode output current, transit and rise times as a function of voltage between anode and cathode, and photoelectron pulse-height spectrum, the quantum-efficiency and the single-electron transit time spread were measured. Descriptions of the measuring systems were also given.

Measurement of the solubilities of certain waste radionuclide compounds will be necessary to adequately assess and predict the ability of potential underground waste storage facilities to meet federally established performance criteria. During such measurements, it is usually necessary to physically separate solid and solution phases. Experiments have been conducted to test and compare the relative efficacy of three commonly used separation methods, i.e. gravity settling, centrifugation and filtration. The results indicated that sorption of solution species onto filters can occur and could potentially lead to erroneous results in solubility measurements when one is dealing with trace amounts of radionuclides in solution. The degree of retention by filters depended on the solution pH and the nature of the filter material. Of the three methods, centrifugation appeared to give the most reliable and consistent results. Filtration was found to give results comparable to centrifugation if care is taken in the selection of filter type.

The health and safety analysis is part of an overall effort to identify and develop innovative underground coal extraction systems. The single-entry tunnel borer system was initially considered an innovative approach to underground mining because it exhibited a means of increasing the speed and efficiency of entry development by reducing the number of entries. However, to be considered a truly advanced system, the tunnel borer had to meet distinct safety criteria as well. The objective was to examine the tunnel borer design and determine whether it offset major health hazards, and satisfied the prescribed safety levels. As a baseline for comparison, the tunnel borer was compared against the continuous mining entry driving system. The results of the health analysis indicated that while the tunnel borer design offered improvements in dust control through the use of water sprays, a higher face ventilation rate, and the application of spalling rather than the conventional grinding process, it interjected an additional mutagenic is and toxic compound into the environment through the use of shotcrete. The tunnel borer system easily conformed with the prescribed fatality limit, but exceeded the required limits for disabling and overall injuries. It also exhibited projected disabling and overall injury rates …

The basic information in this report is from a vu-graph presentation prepared to acquaint new or prospective employees with the Nuclear Test Engineering Division (NTED). Additional information has been added here to enhance a reader's understanding when reviewing the material after hearing the presentation, or in lieu of attending a presentation.

The Townsend ionization coefficient in the strong runaway regime is calculated within the framework of the two-term expansion. Results are compared to the 1-D model. General features of the two models are qualitatively similar, but quantitative differences by factors of approx. 2 are observed.

This report presents an overview of Japan's performance in its trading relations. The report begins with a discussion of the development, size, and importance of Japan's international trading sector. It then examines the composition, institutions, and policies for trade. This is followed by a review of Japan's balance of payments, capital flows, value of the yen, and direction of trade.

The high cost of laser energy is the crucial issue in any potential laser-processing application. It is expensive relative to other forms of energy and to most bulk chemicals. We show those factors that have previously frustrated attempts to find commercially viable laser-induced processes for the production of materials. Having identified the general criteria to be satisfied by an economically successful laser process and shown how these imply the laser-system requirements, we present a status report on the uranium laser isotope separation (LIS) program at the Lawrence Livermore National Laboratory (LLNL).

JANUS, a two-sided, interactive wargame simulation code, was used to explore how using each of several different yield options in a nuclear artillery shell might affect a tactical battlefield simulation. In a general sense, the results or outcomes of these simulations support the results or outcomes of previous studies. In these simulations the Red player knew of the anticipated nuclear capability of the Blue player. Neither side experienced a decisive win over the other, and both continued fighting and experienced losses that, under most historical circumstances, would have been termed unacceptable - that is, something else would have happened (the attack would have been called off). During play, each side had only fragmentary knowledge of the remaining resources on the other side - thus each side desired to continue fighting on the basis of known information. We found that the anticipated use of nuclear weapons by either side affects the character of a game significantly and that, if the employment of nuclear weapons is to have a decided effect on the progress and outcome of a battle, each side will have to have an adequate number of nuclear weapons. In almost all the simulations we ran using JANUS, enhanced radiation …

An initial analysis of particulate effects on molten carbonate fuel cells has been conducted. The analysis has been applied to a conceptual fuel cell with operating parameters appropriate to use with future power generation plants. Particle transport due to several mechanisms has been considered and dominant mechanisms affecting particle delivery to anode channel surfaces and into anode pores have been identified. Thermophoresis and gas flow out from anode pores have been found to inhibit particle arrival on the anode and entry into pores so that neither anode channel blockage nor pore blockage are expected for particles with diameters smaller than about one micron. The analytical approach developed could be applied to other fuel cell types in addition to the molten carbonate fuel cells.

The economics of liquid-fuels production from microalgae was evaluated. A detailed review of published economic analyses of microalgae biomass production revealed wide variations in the published costs, which ranged from several dollars per pound for existing commercial health-food production in the Far East, to less than .05/lb costs projected for microalgae biomass for fuel conversion. As little design information or specific cost data has been published, a credible cost estimate required the conceptual engineering design and cost estimating of microalgae to liquid-fuels processes. Two systems were analyzed, shallow (2 to 3'') covered ponds and deeper (1 ft) open ponds. Only the latter was selected for an in-depth analysis due to the many technical shortcomings of the former approach. Based on the cost analysis of a very simple and low cost process, the most optimistic costs extrapolated were about $60/barrel. These were based on many optimistic assumptions. Additional, more detailed, engieering and cost analyses would be useful. However, the major emphasis in future work in this area should be on demonstrating the basic premises on which this design was based: high productivity and oil content of microalgae strains that can dominate in open ponds and which can be harvested by a …

Objectives of this project are to evaluate benefits associated with control of the surface energetic properties of materials used in heat exchangers; and to identify preferred ranges of these surface conditions that minimize deposits of biological fouling known to deteriorate heat exchange efficiencies in cooling water systems. The technical approach employed uses special diagnostic plates in novel flow cells where fluid flow conditions can be well-controlled, modifying the surface chemistry and surface energy of the plates with very thin coatings and examining the earliest events of biofouling caused by macromolecules and microbial organisms. For the present phase of the project (Year 2), attention is focussed on biofouling in a freshwater/brackish water system.